|
 |
|
 |
 |
|
bar riser pad
started by flandersander
|
|
|
|
March 6th 2009 at 8:23 PM
|
|
| |
flandersander
Starting Member
|
13 Posts
Group: Members
Member Since: March 2nd 2009
|
|
|
|
| |
Hey all. SO I just put a 2" bar riser on my edge classic, and now that rubber pad that covered all the wires and cables and such is too short. IS there anything I can buy to cover up the gap?
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
March 6th 2009 at 8:27 PM
|
|
| |
|
gordonchaine
Lost never to be found.
|
1803 Posts 
Group: Members
Member Since: December 5th 2008
Location: Wilmington, Vermont, USA
Current Sled: 2007 polaris edge xc
2008-2009 Miles: 1200
|
|
|
|
| |
A bar pad?
 Bars on 2003 Pro-X
What's your problem? RUFWM?
|
|
|
|
|
|
March 6th 2009 at 9:55 PM
|
|
| |
flandersander
Starting Member
|
13 Posts
Group: Members
Member Since: March 2nd 2009
|
|
|
|
| |
Sort of. I mean, like this one, but long enough to go to the bottom, with the 2 inch riser. 
|
|
|
|
|
|
March 6th 2009 at 9:59 PM
[ Modified March 6th 2009 at 10:02 PM
]
|
|
| |
|
|
gordonchaine
Lost never to be found.
|
1803 Posts
Group: Members
Member Since: December 5th 2008
Location: Wilmington, Vermont, USA
Current Sled: 2007 polaris edge xc
2008-2009 Miles: 1200
|
|
|
|
| |
Nope. Your gonna have to deal with the gap or make something yourself. (Click on it so you can see)  Nice pic of 2002 edge. At least you gap isn't this big.
What's your problem? RUFWM?
|
|
|
|
|
|
March 6th 2009 at 10:25 PM
|
|
| |
flandersander
Starting Member
|
13 Posts
Group: Members
Member Since: March 2nd 2009
|
|
|
|
| |
Ok, thanks. So there is no product out there that goes on there?
|
|
|
|
|
|
March 6th 2009 at 10:32 PM
|
|
| |
|
|
gordonchaine
Lost never to be found.
|
1803 Posts
Group: Members
Member Since: December 5th 2008
Location: Wilmington, Vermont, USA
Current Sled: 2007 polaris edge xc
2008-2009 Miles: 1200
|
|
|
|
| |
Not that I've seen.
What's your problem? RUFWM?
|
|
|
|
|
|
March 6th 2009 at 11:08 PM
|
|
| |
|
motodeficient
Waiting for more snow
|
1358 Posts
Group: Members
Member Since: July 21st 2007
Location: MAINE
Current Sled: 04 XC 660 SP
2008-2009 Miles: 800
|
|
|
|
| |
you can get some round accordian like tubing at the hardware store.
|
|
|
|
|
|
March 7th 2009 at 10:21 AM
|
|
| |
flandersander
Starting Member
|
13 Posts
Group: Members
Member Since: March 2nd 2009
|
|
|
|
| |
|
|
|
|
|
|
March 8th 2009 at 11:40 PM
|
|
| |
|
TrailRebel
Polaris Crash Test Dummy
|
125 Posts 
Group: Members
Member Since: December 21st 2006
Location: Germantown/Tripoli, Wisconsin, USA
Current Sled: 03 Cross Country Special
2008-2009 Miles: 850
|
|
|
|
| |
Might be a little more work than you're looking for, but it's worth showing...
It's just a RSI pad with the emblems removed and the old polaris bar cover emblem inserted...
I like to ride. Even if you have a Doo/Yami/Cat/Poo, so be it. I bought my snowmobile to have fun, not to tell everyone mine is better than yours. My preference...POLARIS, BABY!
Willow Region Sportsmans Club- www.willowregionsportsmansclub.com/
|
|
|
|
|
|
March 8th 2009 at 11:51 PM
|
|
| |
|
thewayout440
777
thewayout440 mmmmpow.
Updated Last Monday at 7:17 AM
|
3162 Posts 
Group: Members
Member Since: June 3rd 2006
Location: chittenango, ny, USA
Current Sled: 2005 iq r 440
2008-2009 Miles: 1250 ish
|
|
|
|
| |
TEAM 50 CAL.
2005 iqr 440 stock:(
prox 440 chassis water xer in the making 600 big block motor other odds and ends
2003 prox 600 ( SOLD )
rumble pack can, vforce 3 reeds, powermadd hand guards, low black windshield, 1.25 kimpex x-force, 96 woodys studs w/ double backers and tall nuts, black c&a adx's, shorty, race snowflap, 6in riser w/ protaper sno-x bars, wps mountain bar and alluminum throttle block, long grips, black xxx mod rods hood
(plenty more to come)
1995 xcr 600 triple ( SOLD )
fox shox, xtra 10 rear, tether, shorty seat, edge tank, custom paint, dg can, low black windshield, 1 in track, pod filters, xeon bulb, custom bars set up, black headlight cover, sno-stuff skis
The c&a's are like running power steering, you don't need to put any effort for it to turn.
-xcr440
|
|
|
|
|
|
March 9th 2009 at 11:32 AM
|
|
| |
Sesko
Starting Member
|
45 Posts
Group: Members
Member Since: January 18th 2007
Location: White Lake, ON, Canada
Current Sled: 95 XCR 600
|
|
|
|
| |
Go to your local junk-yard and buy the rubber shifter boot off an old honda civic or somethin. My brother did it with his EDGE 800. Just rivet the bottom to your cowling and ur good to go.
|
|
|
|
|
|
March 9th 2009 at 5:35 PM
[ Modified March 9th 2009 at 5:37 PM
]
|
|
| |
|
Dekk85
Advanced Member
|
1245 Posts
Group: Members
Member Since: February 28th 2008
Location: Hawarden, Iowa, USA
Current Sled: 2003 Polaris RMK 600
|
|
|
|
| |
Mine doesn't fit well either but I'm fine with it. I'm fine with mine. The edges do have a cone type thing comming off of the shroud which is not on the Gen II. (as you can see in the background)
 Purple Power
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
|
 |
|
