98 powder efi - powder special started by 46m8080
	March 6th 2009 at 8:47 PM Post #1
	46m8080 Starting Member 40 Posts Group: Members Member Since: March 6th 2009
	im having a problem with my 98 600 special when you start it up it runs great but if you let it sit for a few min and give it gas it pops out the muffler and injectors but it dont do it all the time you can get it to go away by giving it gas by just barley touching it any body with some ideas would be appreciated thanks. Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	March 7th 2009 at 4:38 PM Post #2
	WIzr600 New Member 58 Posts Group: Members Member Since: November 28th 2008 Location: Marshall, Wisconsin, USA Current Sled: 1999 ZR 600 efi 2008-2009 Miles: None
	It pops out of the injectors? Does it bog down or quit when it does this? If you wanna make an omelet, you gotta break some eggs. Rating: 0 Quick Edit Full Edit

	March 7th 2009 at 7:45 PM Post #3
	46m8080 Starting Member 40 Posts Group: Members Member Since: March 6th 2009
	Quote originally posted by WIzr600 It pops out of the injectors? Does it bog down or quit when it does this? yes it does any ideas you have to play with the throttle and somtimes it goes away but most of the time it boggs down pops and dies if i can get it out in the open and get it going before it starts to do this it goes good it ran fine when rode in morning went back out little later was running fine went threw liitle water and stop to talk to budie it poped and i shut it of its been messed up since. Rating: 0 Quick Edit Full Edit

	March 8th 2009 at 1:58 PM Post #4
	WIzr600 New Member 58 Posts Group: Members Member Since: November 28th 2008 Location: Marshall, Wisconsin, USA Current Sled: 1999 ZR 600 efi 2008-2009 Miles: None
	Have you checked the coil or even the plug boots. On mine, the mag side plug wire bent (the little metal part on the inside) and it does kind of the same thing. Mine pops and bogs down until you let off or feather it back to normal, and then its good for a little bit. Maybe even check your connections between the magnito and the comp. If you wanna make an omelet, you gotta break some eggs. Rating: 0 Quick Edit Full Edit

	March 8th 2009 at 10:33 PM Post #5
	46m8080 Starting Member 40 Posts Group: Members Member Since: March 6th 2009
	Quote originally posted by WIzr600 Have you checked the coil or even the plug boots. On mine, the mag side plug wire bent (the little metal part on the inside) and it does kind of the same thing. Mine pops and bogs down until you let off or feather it back to normal, and then its good for a little bit. Maybe even check your connections between the magnito and the comp. r u talking about the wires coming from the stator area and thanks for the help Rating: 0 Quick Edit Full Edit

	March 9th 2009 at 2:33 PM Post #6
	WIzr600 New Member 58 Posts Group: Members Member Since: November 28th 2008 Location: Marshall, Wisconsin, USA Current Sled: 1999 ZR 600 efi 2008-2009 Miles: None
	Quote originally posted by 46m8080 Quote originally posted by WIzr600 Have you checked the coil or even the plug boots. On mine, the mag side plug wire bent (the little metal part on the inside) and it does kind of the same thing. Mine pops and bogs down until you let off or feather it back to normal, and then its good for a little bit. Maybe even check your connections between the magnito and the comp. r u talking about the wires coming from the stator area and thanks for the help yea, i have seen lots of problems due to a few loose connections or bare wires grounding out hope you figure it out If you wanna make an omelet, you gotta break some eggs. Rating: 0 Quick Edit Full Edit

	March 10th 2009 at 7:57 PM Post #7
	WIzr600 New Member 58 Posts Group: Members Member Since: November 28th 2008 Location: Marshall, Wisconsin, USA Current Sled: 1999 ZR 600 efi 2008-2009 Miles: None
	any luck? If you wanna make an omelet, you gotta break some eggs. Rating: 0 Quick Edit Full Edit

	March 10th 2009 at 9:46 PM Post #8
	46m8080 Starting Member 40 Posts Group: Members Member Since: March 6th 2009
	i changed the caps and plugs its as good as new thanks. Rating: 0 Quick Edit Full Edit