|
 |
|
 |
 |
|
New track for the pro x
started by xcr440
|
|
|
|
June 8th 2009 at 10:03 AM
|
|
| |
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts 
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
I am lookiing for a new track for the pro x. Before anyone starts with the bs about studs and track failure. The rubber is cracked on the out side edge, right around the kevlar belting reinforcement that the track is molded around. Which the studs arn't even near to.
I want to stick with a 1" track as it will work with my nearly new 1.17" studs.
I don't like the finger tracks like a ripsaw/hacksaw. Brother had one and it/they are very noisy, makes you think something is going to fall off. Anyone know of a good track??
Know of any place that has oem take off's?
I like the 1" that is on there.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
June 8th 2009 at 12:17 PM
|
|
| |
|
cameron22
Starting Member
|
45 Posts
Group: Members
Member Since: April 6th 2009
Location: Illinois
Current Sled: 1998 zr 600
2008-2009 Miles: 250
|
|
|
|
| |
i dont really know any place with oem discounts but i like the camoplast tracks
|
|
|
|
|
|
June 8th 2009 at 12:35 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
I like camoplast oem tracks. Not a fan of finger tracks.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
June 8th 2009 at 3:39 PM
|
|
| |
|
Mad-Boondocker
Only way to take on FEAR is to take it head on
|
751 Posts 
Group: Members
Member Since: February 19th 2009
Location: East Otto, NY, USA
Current Sled: 98 Polaris Indy 500 Mod
2008-2009 Miles: 185
|
|
|
|
| |
Personally I prefer The camoplast snocross Track but here is a track that does not appear to be a finger track here's a link http://www.camoplast.com/tracks/tracks/carve.html
1998 Polaris Indy 500 chassis with 98 Xc 600 motor
SLP ceramic coated pipe with SLP can
V-force reeds
4 inch pivot riser
Gutted Air Box
EPI clutch kit soon to be installed
Maybe some pro tapers
1998 XC 700 water-cross sled
SLP twin pipes
Some light weight parts
Water-cross mods include taking the parts u do not need
This includes removing the seat replacing gas tank and IFS bars.
|
|
|
|
|
|
June 8th 2009 at 4:24 PM
|
|
| |
|
wilb
Advanced Member
wilb Rush is in.
Updated Last Monday at 5:45 PM
|
1509 Posts 
Group: Members
Member Since: January 24th 2005
Location: Cuba City, WI, USA
Current Sled: 2010 Rush
2008-2009 Miles: 2016
|
|
|
|
| |
http://www.kenssports.com/eshopitems_cat...n.more.htm i have had camoplast cobra tracks on the last couple sleds and loved them. I never have ran studs as i dont like them. But if your dead set on studs you have the right idea with going with a 1 inch track. Anything taller and they seem to bend/break.
2010 Rush Snowchecked
09 600 Dragon Sp traded on rush
07 600 IQ LX Sold for dragon
|
|
|
|
|
|
June 8th 2009 at 6:50 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
The carve looks like it would defiantly work. 
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
July 26th 2009 at 8:16 AM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
Thinking I might try haydays for a 1" oem and a speed track for the 440.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
July 26th 2009 at 10:42 AM
|
|
| |
|
Empire087
Dude wheres the snow?
|
236 Posts 
Group: Members
Member Since: July 19th 2009
Location: Sault Ste Marie, Michigan
Current Sled: 2002 ZL 500
2008-2009 Miles: 475
|
|
|
|
| |
I have the stock cat cone track on my sled, I believe it's a camoplast oem track.
02 ZL 500(apv)
91 jag afs 440
"if it snowed in the summer, I'd ride!"
|
|
|
|
|
|
July 26th 2009 at 11:21 AM
|
|
| |
|
YamahaRider34
Let snowmobiling begin!!!
|
203 Posts
Group: Members
Member Since: July 24th 2009
Location: Wisconsin, USA
Current Sled: 87 Yamaha Enticer 340
2008-2009 Miles: 570
|
|
|
|
| |
Finger tracks would probably wear down faster than a camoplast track.
|
|
|
|
|
|
July 26th 2009 at 11:48 AM
|
|
| |
|
prank
Junior Member
|
261 Posts
Group: Members
Member Since: April 29th 2006
Location: clarissa, minnesota, USA
Current Sled: 2002 440 pro-x
2008-2009 Miles: 600
|
|
|
|
| |
Quote originally posted by xcr440
The carve looks like it would defiantly work.
The stock one i got on my is polaris but has the same pattern/however you want to say it but seems like the lugs would tear/bend easy but then again its a polaris track not camoplast. definitely good pattern though
|
|
|
|
|
|
July 27th 2009 at 8:35 PM
|
|
| |
|
myvertxcape
Bring It, Don't Sing It!
myvertxcape flu sucks azz.
Updated Thursday at 8:00 PM
|
2640 Posts
Group: Members
Member Since: July 10th 2005
Location: Kotlik, AK, USA
Current Sled: '07/8 600RMK 144's
2008-2009 Miles: 6200
|
|
|
|
| |
1" Hacksaw or buy a take off at your dealer is your best bet.
'08 600RMK 144" 6565 miles
SLP single pipe/can, intake kit, footwell vents, Clutching
my own shockwell intake vent, VMI rack, backrest
'07 600RMK 144" 2725 miles
SLP can, VMI rack! Footwell vents
RAW chassis tunnel bag for sale, fits RMK's and Switchbacks. $80 new, $60 shipped within US(looks like new) http://www.snowmobilefanatics.com/forum/...splay.aspx
|
|
|
|
|
|
July 27th 2009 at 9:13 PM
|
|
| |
|
triple650
Advanced Member
|
1068 Posts
Group: Members
Member Since: February 10th 2008
Location: Ramore, Ontario, Canada
Current Sled: 05 fusion 900
2008-2009 Miles: 1630
|
|
|
|
| |
Quote originally posted by YamahaRider34
Finger tracks would probably wear down faster than a camoplast track.
and you know this by experience?
|
|
|
|
|
|
August 22nd 2009 at 9:14 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
Looking at the carve right now, place has them for $350 every 3rd and $390 fully clipped. Just waiting on a price with shipping.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
August 23rd 2009 at 5:58 PM
|
|
| |
|
Xx08BRAAAPPP22xX
Loving the pro-x!!!
Xx08BRAAAPPP22xX nights are getting nice and cold but now it's got to stay like that through out the whole day on into December!
Updated Tuesday at 4:59 PM
|
6669 Posts
Group: Members
Member Since: January 20th 2005
Location: Taberg, New York, USA
Current Sled: 04 Pro-X 600
2008-2009 Miles: 1,960
|
|
|
|
| |
I've rode a sled with a 1 inch Camoplast Hacksaw and it seemed to hook up any where's I took the sled.
Polaris Pro-X=Sledgehammer, and every bit as tough as one!
NATIONAL WEATHER SERVICE...Getting it wrong since 1870
"There might be a foot of ice but there is 400ft of water, let me take my helmet off so I can swim." -ACM
|
|
|
|
|
|
August 23rd 2009 at 7:59 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
I don't like the finger type tracks, they don't hold up on the icy hardpack trails I ride on but thanks for your input.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
August 23rd 2009 at 8:26 PM
|
|
| |
|
|
Xx08BRAAAPPP22xX
Loving the pro-x!!!
Xx08BRAAAPPP22xX nights are getting nice and cold but now it's got to stay like that through out the whole day on into December!
Updated Tuesday at 4:59 PM
|
6669 Posts
Group: Members
Member Since: January 20th 2005
Location: Taberg, New York, USA
Current Sled: 04 Pro-X 600
2008-2009 Miles: 1,960
|
|
|
|
| |
Take a look at a durasport I think they are called. Camoplast makes them I rode another buddy's sled with that track and it seemed to work just fine. I think its in between a 1" and 1 1/4" lug.
Polaris Pro-X=Sledgehammer, and every bit as tough as one!
NATIONAL WEATHER SERVICE...Getting it wrong since 1870
"There might be a foot of ice but there is 400ft of water, let me take my helmet off so I can swim." -ACM
|
|
|
|
|
|
August 23rd 2009 at 8:36 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
I got a few feelers(price) out on a carve, I guess it is a predator with a different name. Made for loose chewed up trail. Which is pretty much what I run on.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
August 23rd 2009 at 9:33 PM
|
|
| |
|
SSnthe10s
Head Horse Power junky
|
1544 Posts
Group: Members
Member Since: November 26th 2005
Location: Dexter, MI, USA
Current Sled: 03' Pro X 700
2008-2009 Miles: 900
|
|
|
|
| |
I want a new track for my sled too. I also cant decide what i want....
-Mike
SOLD-95' RXL Fly bar, 4" pivot riser. Edge track with 144 stainless studs. Triple UNI filters. Rejetted, Clutched. She goes good for an ol' 650.
03' Pro X 700 144 megabites,Clutched,powermadd hand gaurds
|
|
|
|
|
|
August 30th 2009 at 3:12 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
I am going to get a carve(predator) from cbperformanceparts he is the cheapest I can find. He is lower than my cost at partsunlimited.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
August 30th 2009 at 6:28 PM
|
|
| |
|
powdermadd440
guzzlin' gas and haulin ass
powdermadd440 wonders how long it will be before snowmobiles need to be inspected in Maine.
Updated Tuesday at 6:33 PM
|
2695 Posts
Group: Members
Member Since: October 15th 2005
Location: Fairfield, ME, USA
Current Sled: 2001 edge x 600
2008-2009 Miles: 779
|
|
|
|
| |
Quote originally posted by xcr440
I am going to get a carve(predator) from cbperformanceparts he is the cheapest I can find. He is lower than my cost at partsunlimited.
I will be picking up a 1.25" carve from him too, unless I get a good deal on the 1 3/8" track on ebay.
2001 edge x 600, Vforce 3 reeds, SLP boost bottle, SLP can, yellow primary spring, 4" RSI risers, RSI backcountry bars, RSI gel wraps, Acerbis hand guards, yellow skidplate, Simmons skis, 1 3/8" camoplast track, RSI ice scratchers
|
|
|
|
|
|
August 30th 2009 at 6:39 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
sounds good. I didn't notice much difference between my 1" polaris and a 1.25" ripsaw on my brothers 01' 600x. The ripsaw seemed to lay over on the hard stuff.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
August 30th 2009 at 6:41 PM
|
|
| |
|
|
Mad-Boondocker
Only way to take on FEAR is to take it head on
|
751 Posts
Group: Members
Member Since: February 19th 2009
Location: East Otto, NY, USA
Current Sled: 98 Polaris Indy 500 Mod
2008-2009 Miles: 185
|
|
|
|
| |
Quote originally posted by SSnthe10s
I want a new track for my sled too. I also cant decide what i want....
Do u like powder or trails If u are like me and spend 78% off trail I would look into a 1.5 intense camoplast track if you spend most of your time on trail and like to go off trail every now and then go with a 1.25 camoplat ripsaw or a 1.25 camoplast cobra.
1998 Polaris Indy 500 chassis with 98 Xc 600 motor
SLP ceramic coated pipe with SLP can
V-force reeds
4 inch pivot riser
Gutted Air Box
EPI clutch kit soon to be installed
Maybe some pro tapers
1998 XC 700 water-cross sled
SLP twin pipes
Some light weight parts
Water-cross mods include taking the parts u do not need
This includes removing the seat replacing gas tank and IFS bars.
|
|
|
|
|
|
August 30th 2009 at 7:12 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
Anything over 1" will make my 1.18" studs worthless which are pretty much mandatory on the icey tight trails in northern wi.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
September 8th 2009 at 9:36 AM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Yesterday at 10:49 PM
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
well I went with a 1" carve(predator) from Cbperformance. Great price and fast shipping.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
|
 |
|
