440 problem - dang 440 right started by 440raceman
	June 24th 2009 at 3:55 PM Post #1
	440raceman xcsp 33 Posts Group: Members Member Since: June 24th 2009 Current Sled: 2000 polaris 440 xcsp 2008-2009 Miles: 850 miles
	I went up to my 440 and it pulled harder than usual and would not start and dont know what to do now and how to get it started Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	June 24th 2009 at 9:48 PM Post #2
	CRASHSKIDOO Starting Member 27 Posts Group: Members Member Since: April 28th 2009 Location: SouthWindsor, CT, USA Current Sled: 2004 MXZX 600 2008-2009 Miles: 350
	Quote originally posted by 440raceman I went up to my 440 and it pulled harder than usual and would not start and dont know what to do now and how to get it started The first thing you want to do is pull the plugs and put a few squirts of a light oil in each cylinder and pull it over. If this makes the pulling easier then replace the plugs and try starting it. if this does not make the pulling easier you may have to pull the heads to see what is going on in the cylinders. I should have asked first is this fan cooled or liquid cooled, and how long has it been sitting. Hope this helps Rating: 0 Quick Edit Full Edit

	July 11th 2009 at 1:13 AM Post #3
	mabeldk4 Starting Member 12 Posts Group: Members Member Since: July 11th 2009 Current Sled: 1991 polaris 500 classic 2008-2009 Miles: 500
	check the compression in the cylinders too Rating: 0 Quick Edit Full Edit