Been working on my edge - Here is what i have done so far pretty close to done started by Pharotek
	August 27th 2009 at 5:43 AM  [ Modified August 27th 2009 at 5:50 AM ] Post #1
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	I started last month to work on my edge. I wanted a 136" track and then that lead to other things here is what I did. These are of my sled before the work. Add SLP tunnel and rail extension kit. Painted the exhaust pipe's then fixed leaky top end gaskets and cleaned the VES. Exhaust just set in place after being painted Put on the tunnel extension kit. Then replace some bad idler wheel's and got the idea to re-paint/paint the whole skid. I replaced all the red idler wheels with yellow ones and painted the rails Red and re-painted the swing arms Yellow. I still have to get 3 more idler wheels and the shock you see missing is getting serviced. I am waiting on more funds to get a Camoplast Carve 1" track. Then plan to put 162 studs in with red backers. Also the chain case cover is going to be painted red soon as i can get the time to do it. more things to do. Engine has Boysen reeds, SLP air-box/boost bottle, primary clutch was worked before i bought the sled no idea of what it has in it. plan to go from a 39 tooth bottom sprocket to a 37 or 36 tooth. I also am getting powermadd pivoting 2" or 4"risers, their yellow hand guards, red chrome cobra windshield, and plan to add 2"-3" of foam to raise the seat height. When I get the track and every thing back in place I will post the completed Photo's. Would love your guys though/idea's 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	August 27th 2009 at 11:27 AM Post #2
	Mad-Boondocker Only way to take on FEAR is to take it head on 751 Posts Group: Members Member Since: February 19th 2009 Location: East Otto, NY, USA Current Sled: 98 Polaris Indy 500 Mod 2008-2009 Miles: 185
	Pretty good so far Take some pics with the extension on 1998 Polaris Indy 500 chassis with 98 Xc 600 motor SLP ceramic coated pipe with SLP can V-force reeds 4 inch pivot riser Gutted Air Box EPI clutch kit soon to be installed Maybe some pro tapers 1998 XC 700 water-cross sled SLP twin pipes Some light weight parts Water-cross mods include taking the parts u do not need This includes removing the seat replacing gas tank and IFS bars. Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 2:12 PM Post #3
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	Quote originally posted by Mad-Boondocker Pretty good so far Take some pics with the extension on The rail extensions? They are on their the black bars in the last 3 pics. 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 2:20 PM Post #4
	Mad-Boondocker Only way to take on FEAR is to take it head on 751 Posts Group: Members Member Since: February 19th 2009 Location: East Otto, NY, USA Current Sled: 98 Polaris Indy 500 Mod 2008-2009 Miles: 185
	I'm sorry I meant Do have any pics with a new track LOL 1998 Polaris Indy 500 chassis with 98 Xc 600 motor SLP ceramic coated pipe with SLP can V-force reeds 4 inch pivot riser Gutted Air Box EPI clutch kit soon to be installed Maybe some pro tapers 1998 XC 700 water-cross sled SLP twin pipes Some light weight parts Water-cross mods include taking the parts u do not need This includes removing the seat replacing gas tank and IFS bars. Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 2:25 PM Post #5
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	Quote originally posted by Mad-Boondocker I'm sorry I meant Do have any pics with a new track LOL Hehe na i still have to order it. Gatta wait a bit to get the cash for it. I was ganna get it last week but i bought that 98 Indy 500 I couldn't pass up on. 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 3:07 PM Post #6
	Mad-Boondocker Only way to take on FEAR is to take it head on 751 Posts Group: Members Member Since: February 19th 2009 Location: East Otto, NY, USA Current Sled: 98 Polaris Indy 500 Mod 2008-2009 Miles: 185
	Good job buying that 500 1998 Polaris Indy 500 chassis with 98 Xc 600 motor SLP ceramic coated pipe with SLP can V-force reeds 4 inch pivot riser Gutted Air Box EPI clutch kit soon to be installed Maybe some pro tapers 1998 XC 700 water-cross sled SLP twin pipes Some light weight parts Water-cross mods include taking the parts u do not need This includes removing the seat replacing gas tank and IFS bars. Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 3:10 PM Post #7
	nhrider Junior Member nhrider Looking at an 06 Fusion 600 on Sunday morning! Updated Thursday at 7:57 PM 116 Posts Group: Members Member Since: August 22nd 2009 Location: Salem, New Hampshire, USA
	thats a good looking edge Current Toys: 1998 Polaris Ultra 680 - 2 inch bar riser, Powermadd handguards 1989 Polaris Classic 500 - Comet Clutch 1989 Polaris Indy 500 - Parting Out 2008 Honda 50 - Pro Taper bars Past Toys: 2003 Polaris Edge xc 340 - Cobra Windsheild 1998 Yamaha srx 700 triple - sold 1996 Yamaha V-Max - smashed, fixed, blew up, junked Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 3:37 PM Post #8
	DarkStar31 New Member 97 Posts Group: Members Member Since: February 2nd 2004 Location: Fontana, wi, USA
	looks awesome!!! Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 4:12 PM  [ Modified August 27th 2009 at 4:14 PM ] Post #9
	Rock raise a little hell 1195 Posts Group: Members Member Since: June 14th 2006 Location: St.Paul Park, MN, USA Current Sled: 2005 700xcsp 2008-2009 Miles: 571
	No offense intended....should of gone with track USA ext.kit. and if your going to long track it I would go min. of 1.25 X 136....just my .02! Just out of curiousity, did you paint or powder coat the rails? Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 4:20 PM Post #10
	teamarctic14 i have a go sled not a show sled 312 Posts Group: Members Member Since: February 10th 2009 Location: north lawrence, ny, USA Current Sled: 2000 zrt 600 2008-2009 Miles: 389
	its gunna look good man Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 5:35 PM Post #11
	tdgbigfoot Certified sledaholic 1277 Posts Group: Members Member Since: September 12th 2008 Location: Albany, Vermont, USA Current Sled: 99 SKS 700, 96 Mach Z 780 2008-2009 Miles: 500
	Loving it! 2000 Indy Trail Touring 550, 1999 Indy SKS 700, 1996 Mach Z 780, 1994 Wildcat 700, 1991 Formula Plus, 1990 Safari LX, 1989 Indy 400, 1988 Tundra Skandic, 1987 Citation, 1986 Indy Trail 488, 198? Bravo 1969 Corvette 350 2000 Cheroekee - 4 1/2" lift, & other goodies Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 5:53 PM  [ Modified August 27th 2009 at 6:00 PM ] Post #12
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	Quote originally posted by Rock No offense intended....should of gone with track USA ext.kit. and if your going to long track it I would go min. of 1.25 X 136....just my .02! Just out of curiousity, did you paint or powder coat the rails? I did look at tracks usa and didn't like the rails that came with it. I planned on getting a 1" and studding it so i don't plann on getting a 1.25 track. but i'm pretty sure i can put a 1.25 in their still. No powder coat, I had to go the cheap way and roughed the rails up then Primer/Painted with a gloss enamel paint. Should hold up so far it has. I did scratch at it a bit to see how it will stick since aluminum is hard to paint and seems to stay on their. will see though when I have ice chunks and other stuff bouncing all over in it this winter. 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 6:34 PM Post #13
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	I looked into Tracks usa a little more and i see that with their the HI-fax goes all the way to the back which i beat is good. I guess if i end up not liking the current ones i can change it later on. I do see their point on the track not haveing support near the rear but i'll see how this one works out frist. Thanks for a very good point on the 2 different style extensions. 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 10:40 PM Post #14
	TRICKPaint Paint that's good for your cranium 2511 Posts Group: Members Member Since: May 25th 2006 Location: Mount Vernon, OH, USA Current Sled: '05 Renegade 600 HO-SDI
	Lookin' good! Did you have the skid powder coated? Rating: 0 Quick Edit Full Edit

	August 27th 2009 at 11:17 PM Post #15
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	Quote originally posted by TRICKPaint Lookin' good! Did you have the skid powder coated? as stated above: "No powder coat, I had to go the cheap way and roughed the rails up then Primer/Painted with a gloss enamel paint. Should hold up so far it has. I did scratch at it a bit to see how it will stick since aluminum is hard to paint and seems to stay on their. will see though when I have ice chunks and other stuff bouncing all over in it this winter." 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Full Edit

	September 28th 2009 at 1:20 AM Post #16
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	Got a few more parts in for the sled. Powermadd Pivoting Riser with 4.5" riser block Polaris Red low cut windsheild. Hand Gaurds are on their way aswell. can anyone from their experiance tell me of a good bar pad to cover up the wires and stuff. I tried to original cover and it looks gay... Any ideas would help 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Full Edit

	September 28th 2009 at 5:15 AM Post #17
	tazzracing1 Junior Member 124 Posts Group: Members Member Since: September 14th 2009 Current Sled: 1998 ZR600 EFI
	Looks great and alot of work. How about the interior paint for the cover. Rating: 0 Quick Edit Full Edit

	September 28th 2009 at 10:34 AM Post #18
	scott240 Junior Member 155 Posts Group: Members Member Since: January 16th 2009 Location: Ontario, Canada Current Sled: 1998 Arctic Cat zr600 EFI 2008-2009 Miles: 200
	Looks great, nice work! I bet you are just dying to try it out now [1998 Arctic Cat zr600] * Powermadd riser * 96 Woodies * Sno-stuff Can * Ripsaw * Fox clicker shocks * Modified Cobra windscreen * Fishbone tunnel supports [2003 Polaris Pro-X 440] * V-Force 3 reeds * Studded * Walker-Evans all around Rating: 0 Quick Edit Full Edit

	September 28th 2009 at 11:03 AM Post #19
	xcr440 Sundowners Trail Coordinator xcr440 icefish's because having feeling in your fingertips is overrated. Updated Over an hour ago 12582 Posts Group: Members Member Since: February 1st 2003 Location: St.Germain/Edgerton, Wisconsin, USA Current Sled: 03prox700/97xcr440 2008-2009 Miles: 610
	Quote originally posted by Pharotek Got a few more parts in for the sled. Powermadd Pivoting Riser with 4.5" riser block Polaris Red low cut windsheild. Hand Gaurds are on their way aswell. can anyone from their experiance tell me of a good bar pad to cover up the wires and stuff. I tried to original cover and it looks gay... Any ideas would help one off a pro x should work?? a good beer drinker isnt a picky beer drinker Loggers.... Working their ass off so you can wipe yours! "Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks. 2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains 1997 xcr440 my clutch kit, 380 mains,T-flow Rating: 0 Quick Edit Full Edit

	September 28th 2009 at 2:01 PM  [ Modified September 28th 2009 at 2:02 PM ] Post #20
	polaris91 117 racing polaris91 ugh. Updated Tuesday at 8:30 PM 3647 Posts Group: Members Member Since: March 9th 2006 Location: bridgeport, new york, USA Current Sled: 1991 indymod/2005 xcsp600 2008-2009 Miles: 2900 2009-2010 Miles: grass!?
	you could go with something like an rsi or fly pad then get some wire loom and zipties depending on how spread apart your controlls are you can push the plugs so theyre under the barpad like mine 1990 indy trail bored.20over, ported and polished, cluched and geared, chaincase/brakes/jackshaft from 93 xlt, headlight cover, teather, some custom painting, black skid plate, blue running board trim, fox shocks, blue/gray powermadd handguards, 2 in powermadd riser, fly bars/barpad,blue leds(underglow),1 in lug track, teather mount from a 96xcr440,blue guage bulbs, blue c&as, xtra 10 rear, and edge seat and tank. 2005 xcsp 600,chrome windy,stripped decals,3.5 inch rox riser,white powermadd handguards,white c&a ultra 3 skis 6in shapers,camoplast cobra,slp can,fly bars/barpad,xeon headlight bulbs,rsi barhooks,odi grips,light blue clutch spring,slp vents,black headlight cover,billet wheels,rydefx clicker, Rating: 0 Quick Edit Full Edit

	September 28th 2009 at 3:35 PM Post #21
	Pharotek Junior Member Pharotek is getting tired of his green lawn! Let it snow already! Updated Tuesday at 10:29 PM 213 Posts Group: Members Member Since: July 6th 2009 Location: corning, new york, USA Current Sled: 01 600 xcsp edgex 2008-2009 Miles: 447
	Quote originally posted by polaris91 you could go with something like an rsi or fly pad then get some wire loom and zipties depending on how spread apart your controlls are you can push the plugs so theyre under the barpad like mine hey thanks for the pic i like the Fly pad i will order that tonight cheers! 98 Indy 500-Wife's 01 XCsp 600 edgex-current 96 formula lll 600-sold after droping a cylinder for the second time 95 Indy 440 50yrs anniversary-sold(miss this sled) 74 Polaris Electra 340-sold 69 Massey Ferguson Ski Whiz 440-sold(got for bday when i was 14) Rating: 0 Quick Edit Full Edit

	September 28th 2009 at 7:44 PM Post #22
	PrtclMn001 Doin' the things a particle can... 272 Posts Group: Members Member Since: January 6th 2009 Location: Oneida, NY Current Sled: '09 Arctic Cat T500
	looks good! Rating: 0 Quick Edit Full Edit

	October 3rd 2009 at 10:00 PM Post #23
	Craig_Polaris Junior Member 147 Posts Group: Members Member Since: November 11th 2008 Location: Derry, New Hampshire, USA Current Sled: 2002 Edge X 800
	looking good. let us know when you ride it for a while how the paint holds up on the rails 2002 Edge x 800; Recently swallowed a valve so, New wiseco pistons, rings, pins, circlips, renikisil cylinders, and updated lower end bearings. - Slp single Pipe and Can - Vforce3 Reeds - Slp air horn and gutted box - 140/310 Slp primary spring Rating: 0 Quick Edit Full Edit

	October 5th 2009 at 5:05 AM  [ Modified October 5th 2009 at 5:06 AM ] Post #24
	spurlingp Starting Member 2 Posts Group: Members Member Since: January 27th 2008
	looks good, what a differance the longer track is going to make. Rating: 0 Quick Edit Full Edit

	October 5th 2009 at 6:06 AM Post #25
	motodeficient Waiting for more snow 1358 Posts Group: Members Member Since: July 21st 2007 Location: MAINE Current Sled: 04 XC 660 SP 2008-2009 Miles: 800
	Nice jobs, that is sick. Makes me want to extend my edge Rating: 0 Quick Edit Full Edit