1991 phazer need help - trying to replace track on my phazer started by tschernecker
	September 6th 2009 at 12:02 PM Post #1
	tschernecker Starting Member 2 Posts Group: Members Member Since: September 6th 2009
	I have a 1991 phazer great machine just need a new track. i have removed everything but main cross shaft in front for track. i removedthe bolt and sprocket on the right side and the speedo cable on the left, but cant slide the shaft in either direction am I missing something. Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	September 6th 2009 at 12:12 PM Post #2
	SRXSRULE Junior Member 472 Posts Group: Members Member Since: May 15th 2006 Location: Stouffville, Ontario, Canada Current Sled: 2003 SXViper 700 2008-2009 Miles: 2000
	You have to remove the chaincase I believe to get the shaft out. Someone can correct me if I'm wrong because its been a while since I've done a track in a phazer. Rating: 0 Quick Edit Full Edit

	September 7th 2009 at 11:34 AM Post #3
	tschernecker Starting Member 2 Posts Group: Members Member Since: September 6th 2009
	Quote originally posted by SRXSRULE You have to remove the chaincase I believe to get the shaft out. Someone can correct me if I'm wrong because its been a while since I've done a track in a phazer. thanks for the help Rating: 0 Quick Edit Full Edit

	September 19th 2009 at 11:24 PM Post #4
	PZ1 Junior Member 347 Posts Group: Members Member Since: March 5th 2005 Location: WIS
	You do not have to remove the chaincase. The track needs to be moved away from the sprockets to allow the shaft to move sideways. Rating: 0 Quick Edit Full Edit

	September 20th 2009 at 8:21 PM Post #5
	Cooked New Member 53 Posts Group: Members Member Since: September 21st 2008 Location: Brodhead, WI, USA Current Sled: 86 Phazer 2008-2009 Miles: 1500
	The bearing on the speedo side might be frozen to the shaft Rating: 0 Quick Edit Full Edit

	September 21st 2009 at 7:27 AM Post #6
	snowdad4 New Member 70 Posts Group: Members Member Since: October 12th 2004 Location: wa, USA
	are there any collars with set screws on the driveshaft? also, look at the drivers themselves. some earlier yamahas had set screws on the drivers. Rating: 0 Quick Edit Full Edit