|
 |
|
 |
 |
|
WTB
- Throttle and/or Brake extension for polaris edge
started by Craig_Polaris
|
|
|
|
September 24th 2009 at 9:26 PM
|
|
| |
|
Craig_Polaris
Junior Member
|
147 Posts 
Group: Members
Member Since: November 11th 2008
Location: Derry, New Hampshire, USA
Current Sled: 2002 Edge X 800
|
|
|
|
| |
anyone got anything?
2002 Edge x 800; Recently swallowed a valve so, New wiseco pistons, rings, pins, circlips, renikisil cylinders, and updated lower end bearings.
- Slp single Pipe and Can
- Vforce3 Reeds
- Slp air horn and gutted box
- 140/310 Slp primary spring
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
September 24th 2009 at 9:53 PM
|
|
| |
bach104
Starting Member
|
9 Posts
Group: Members
Member Since: September 20th 2009
Location: illinois, Zimbabwe
Current Sled: 2001 xc sp 700
|
|
|
|
| |
how long are you looking for?
|
|
|
|
|
|
September 24th 2009 at 11:15 PM
|
|
| |
|
dtmmil
Senior Member
|
3180 Posts 
Group: Members
Member Since: January 27th 2007
Location: Hawley, MN, USA
Current Sled: 99 xc700
|
|
|
|
| |
I may have a powermadd extension for the throttle, but it works for up to 10" of rise. And can you reroute your brake line for more length, not sure if you can on the edge or not.
Clutched
Jetted, boyesen reed petals, boost bottle, 98xc carbs slides, 1371 needles, gutted air box
Homeade 7 1/2" riser
Homeade suspension drop brackets
shortened and blackened windshield
powermadd handguards
144 conversion, tracks usa extensions, custom tunnel extension and rear bumper, IQ flap, 1.25" track
|
|
|
|
|
|
September 25th 2009 at 7:25 AM
|
|
| |
|
|
Craig_Polaris
Junior Member
|
147 Posts
Group: Members
Member Since: November 11th 2008
Location: Derry, New Hampshire, USA
Current Sled: 2002 Edge X 800
|
|
|
|
| |
The brake line is gonna have to be like another 6-10 inches longer, and i really cant on the edg because of the way it is
2002 Edge x 800; Recently swallowed a valve so, New wiseco pistons, rings, pins, circlips, renikisil cylinders, and updated lower end bearings.
- Slp single Pipe and Can
- Vforce3 Reeds
- Slp air horn and gutted box
- 140/310 Slp primary spring
|
|
|
|
|
|
September 25th 2009 at 7:36 AM
|
|
| |
|
|
dtmmil
Senior Member
|
3180 Posts
Group: Members
Member Since: January 27th 2007
Location: Hawley, MN, USA
Current Sled: 99 xc700
|
|
|
|
| |
How is it, is it mostly hard line? I don't know. On my genII chassis its mostly rubber so I rerouted and have plenty of room for 10". But I remember that the edge was different. You could check with Student Driver here, I don't believe his shop is open any longer, unfortunately, but he could probably tell you what you would need, very good guy to talk with, extremely helpful and knowledgeable.
Clutched
Jetted, boyesen reed petals, boost bottle, 98xc carbs slides, 1371 needles, gutted air box
Homeade 7 1/2" riser
Homeade suspension drop brackets
shortened and blackened windshield
powermadd handguards
144 conversion, tracks usa extensions, custom tunnel extension and rear bumper, IQ flap, 1.25" track
|
|
|
|
|
|
September 25th 2009 at 7:44 AM
|
|
| |
|
|
Craig_Polaris
Junior Member
|
147 Posts
Group: Members
Member Since: November 11th 2008
Location: Derry, New Hampshire, USA
Current Sled: 2002 Edge X 800
|
|
|
|
| |
right now about a 8 inch hardline on the caliper then sofline the rest of the way up but it was behind the oil but i pulled it out and got like another inch
2002 Edge x 800; Recently swallowed a valve so, New wiseco pistons, rings, pins, circlips, renikisil cylinders, and updated lower end bearings.
- Slp single Pipe and Can
- Vforce3 Reeds
- Slp air horn and gutted box
- 140/310 Slp primary spring
|
|
|
|
|
|
September 25th 2009 at 7:54 AM
|
|
| |
|
|
dtmmil
Senior Member
|
3180 Posts
Group: Members
Member Since: January 27th 2007
Location: Hawley, MN, USA
Current Sled: 99 xc700
|
|
|
|
| |
Can you maybe make the hard line longer, that stuff is cheap?
Clutched
Jetted, boyesen reed petals, boost bottle, 98xc carbs slides, 1371 needles, gutted air box
Homeade 7 1/2" riser
Homeade suspension drop brackets
shortened and blackened windshield
powermadd handguards
144 conversion, tracks usa extensions, custom tunnel extension and rear bumper, IQ flap, 1.25" track
|
|
|
|
|
|
September 25th 2009 at 8:30 AM
|
|
| |
|
|
Craig_Polaris
Junior Member
|
147 Posts
Group: Members
Member Since: November 11th 2008
Location: Derry, New Hampshire, USA
Current Sled: 2002 Edge X 800
|
|
|
|
| |
thats what i was thinking, i know autozone sells a 8" hard line for like2 bucks with both connectors on it so i figured i would just run the hardline up to as far as possibe to the bars
2002 Edge x 800; Recently swallowed a valve so, New wiseco pistons, rings, pins, circlips, renikisil cylinders, and updated lower end bearings.
- Slp single Pipe and Can
- Vforce3 Reeds
- Slp air horn and gutted box
- 140/310 Slp primary spring
|
|
|
|
|
|
October 12th 2009 at 9:51 PM
|
|
| |
prox14127
Starting Member
|
16 Posts
Group: Members
Member Since: January 12th 2009
Location: Buffalo, New York
2008-2009 Miles: 1400
|
|
|
|
| |
i have a complete setup from a pro x, braided lines, both brake and throttle as well as a 4.5 inch riser, only selling packaged together.
|
|
|
|
|
|
October 12th 2009 at 10:04 PM
|
|
| |
|
|
| |
I still have some new Gravity Worx extended cables left for the Edge.
Retail was $64.99 plus S&H, so I'm letting them go for $40 including S&H.
Let me know
|
|
|
|
|
|
October 15th 2009 at 10:57 AM
[ Modified October 15th 2009 at 10:58 AM
]
|
|
| |
|
rsiracing.com
SF Supporter
|
106 Posts
Group: Site Supporters
Member Since: August 30th 2006
Location: BOISE, IDAHO, USA
|
|
|
|
| |
We have both in stock and now have braided throttle cables. Type this code ad445d into the coupons box for a 10% discount for being a SF Member.
"THE BEST HANDLEBARS ON THE SNOW"
"PROFESSIONAL SNOWMOBILE EQUIPMENT"
WWW.RSIRACING.COM
952-225-0452
|
|
|
|
|
1 user(s) are reading this topic (0 Members and
1 Guests)
|
 |
|
