1980 Enticer 250 Carburetor - Carb rebuild kit started by EightyEnticer250
	October 6th 2009 at 9:58 AM Post #1
	EightyEnticer250 Starting Member 3 Posts Group: Members Member Since: October 6th 2009
	I am having troubles with my Yamaha Enticer 250 snowmobile. It runs, but the idle on the carb is rather high and I can not seem to adjust it lower. I assume there is an idler screw? It did not have this "high idle" last year and the idle screw was not touched, so I am not sure what is causing the higher idle. Thought about cleaning and rebuilding the carb. Anyone know where I could purchase a carb rebuild kit? Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	October 6th 2009 at 10:25 AM Post #2
	3ft Average Member 642 Posts Group: Members Member Since: October 7th 2004 Location: Eagan, MN, USA
	should be easy to find on the web...stay away from the dealer. I am guessing the choke is sticking, or you could have a lean condition due to a dirty pilot jet. I would say a good cleaning will take of these issues. I would grab a float bowl gasket and needle & seat.... Pin it till you see god, and back off just a hair!! Rating: 0 Quick Edit Full Edit

	October 25th 2009 at 2:23 PM Post #3
	EightyEnticer250 Starting Member 3 Posts Group: Members Member Since: October 6th 2009
	I need the following part for the carb: See the link. I lost it when I was cleaning the carb. http://www.babbittsonline.com/pages/part...amaha.aspx enter url and then chose yamaha, snowmobile, 1980, ET250D then chose Carb ET250C, then the schematic will come up showing the parts by number. It's part #34 on the list at url above. Anyone know where I could get a replacement? Kevin Rating: 0 Quick Edit Full Edit

	October 25th 2009 at 10:51 PM Post #4
	stormrider62033 wally 4729 Posts Group: Members Member Since: December 25th 2004 Location: Gillespie, IL, USA Current Sled: 99xcr 800 2008-2009 Miles: 500
	good luck there alot of parts you can no longer get from yamaha mid Il alway's waiting for snow,moving north(way north)2001 thundercat 99xcr 800 97SPX ULTRA 96 zrt 600&800,92 doo plusX 92 v max 4 750 Rating: 0 Quick Edit Full Edit

	October 26th 2009 at 7:33 AM Post #5
	EightyEnticer250 Starting Member 3 Posts Group: Members Member Since: October 6th 2009
	Good news....I found it while cleaning under the engine. Got it all put back together and she runs great. Rating: 0 Quick Edit Full Edit