Got to drain the antifrezzee - what a dumb move started by muskovin30@yahoo.com
	October 18th 2009 at 6:48 PM Post #1
	muskovin30@yahoo.com Junior Member 146 Posts Group: Members Member Since: February 1st 2009 Location: fruitport, mi Current Sled: polaris indy storm
	Ok i have to drain the anit frezze cause i didnt mix it 50/50 before i put it in. So whats the best way to do this? Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	October 18th 2009 at 6:51 PM Post #2
	xc_rider08 99 xc 600 141" 67 Posts Group: Members Member Since: August 12th 2009 Location: Mandan, ND Current Sled: 99 XC 600 with mods 2008-2009 Miles: 1300+
	Quote originally posted by muskovin30@yahoo.com Ok i have to drain the anit frezze cause i didnt mix it 50/50 before i put it in. So whats the best way to do this? pull one of the hoses coming off the bottom of the tank. drain into a bucket. the lift the rear end of the sled off the groun to get all the antifreeze from the back to drain out... unsure how to do the motor the correct way just make sure when u fill it back up that u dont get any air bubbles and u bleed the lines so u dont over heat and burn your sled up Rating: 0 Quick Edit Full Edit

	October 18th 2009 at 7:54 PM Post #3
	dtmmil Senior Member 3182 Posts Group: Members Member Since: January 27th 2007 Location: Hawley, MN, USA Current Sled: 99 xc700
	Whatever you do, don't drill a hole in one of the hoses, it works, but the hose is expensive to replace! haha Clutched Jetted, boyesen reed petals, boost bottle, 98xc carbs slides, 1371 needles, gutted air box Homeade 7 1/2" riser Homeade suspension drop brackets shortened and blackened windshield powermadd handguards 144 conversion, tracks usa extensions, custom tunnel extension and rear bumper, IQ flap, 1.25" track Rating: 0 Quick Edit Full Edit

	October 19th 2009 at 8:56 PM Post #4
	muskovin30@yahoo.com Junior Member 146 Posts Group: Members Member Since: February 1st 2009 Location: fruitport, mi Current Sled: polaris indy storm
	anyone else? Rating: 0 Quick Edit Full Edit

	October 19th 2009 at 9:12 PM Post #5
	Zippi Average Member 537 Posts Group: Members Member Since: November 7th 2005 Location: Groton, NY, USA 2008-2009 Miles: 1300
	pull the hose and drain it all out, or buy a pump and suck it out...how else can you do it?? take the cap off and flip the sled upside down and let it run all over the floor!!! Snowcheck: 2010 Polaris Rush 2009 Ski-Doo 600 ETEC www.hygearsuspension.com Rating: 0 Quick Edit Full Edit

	October 19th 2009 at 9:27 PM Post #6
	snowdriven Do a wheelie 685 Posts Group: Members Member Since: April 13th 2008 Location: Southern G. Bay, Canada Current Sled: 1999 MXZ 600 2008-2009 Miles: 2000
	The same way you did it before? Rating: 0 Quick Edit Full Edit

	October 19th 2009 at 9:32 PM Post #7
	ACG Sell-Out - Moderator 9086 Posts Group: Moderators Member Since: October 29th 2001 Location: Bountiful, UT, USA Current Sled: 2009 Dragon 800 2008-2009 Miles: 1500
	Quote originally posted by snowdriven The same way you did it before? That's what I thought..... Rating: 0 Quick Edit Full Edit

	October 19th 2009 at 10:37 PM Post #8
	The_Mad_Warrior Gate Attendant The_Mad_Warrior is a laid off bum. Updated Wednesday at 9:59 PM 1466 Posts Group: Members Member Since: February 2nd 2006 Location: Madawaska, Ontario, Canada Current Sled: 1997 MXZ 670
	Quote originally posted by ACG Quote originally posted by snowdriven The same way you did it before? That's what I thought..... Thats actually the first thing that popped into my head too? If you cant fix it with duct tape, tylnol, or band aids your screwed. Rating: 0 Quick Edit Full Edit

	October 21st 2009 at 6:44 PM Post #9
	muskovin30@yahoo.com Junior Member 146 Posts Group: Members Member Since: February 1st 2009 Location: fruitport, mi Current Sled: polaris indy storm
	well i neaver ment to drain it. It all just came out when i rebuilt the thing Quote originally posted by The_Mad_Warrior Quote originally posted by ACG Quote originally posted by snowdriven The same way you did it before? That's what I thought..... Thats actually the first thing that popped into my head too? Rating: 0 Quick Edit Full Edit