Stihl 24" bar and 2 chains started by xcr440
	October 21st 2009 at 5:51 PM Post #1
	xcr440 Sundowners Trail Coordinator xcr440 has to go through the snowmobile trailer....sleds will be north next weekend. Updated Thursday at 1:45 PM 12570 Posts Group: Members Member Since: February 1st 2003 Location: St.Germain/Edgerton, Wisconsin, USA Current Sled: 03prox700/97xcr440 2008-2009 Miles: 610
	This bar has 90% of it's paint on it. It has seen very little use. it comes with 2 chains. The cutters are over 5/16" and under 3/8" long. So there is alot of use left in the chains. 1 is a chisel the other is a safety. $100 shipped. a good beer drinker isnt a picky beer drinker Loggers.... Working their ass off so you can wipe yours! "Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks. 2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains 1997 xcr440 my clutch kit, 380 mains,T-flow Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	October 21st 2009 at 6:43 PM Post #2
	Mad-Boondocker Only way to take on FEAR is to take it head on 751 Posts Group: Members Member Since: February 19th 2009 Location: East Otto, NY, USA Current Sled: 98 Polaris Indy 500 Mod 2008-2009 Miles: 185
	stihl is awesome I own 2 of them best saw I have ever bought I have no use for the bar I just bought a 3ft bar for my 044 and it is a little to big for my 250 The dealer said I could go to 20 inches It has an 18 on it 1998 Polaris Indy 500 chassis with 98 Xc 600 motor SLP ceramic coated pipe with SLP can V-force reeds 4 inch pivot riser Gutted Air Box EPI clutch kit soon to be installed Maybe some pro tapers 1998 XC 700 water-cross sled SLP twin pipes Some light weight parts Water-cross mods include taking the parts u do not need This includes removing the seat replacing gas tank and IFS bars. Rating: 0 Quick Edit Full Edit

	October 21st 2009 at 6:49 PM Post #3
	Charger400tx Starting Member 4 Posts Group: Members Member Since: October 20th 2009
	what size are the drive teeth? Rating: 0 Quick Edit Full Edit

	October 21st 2009 at 6:56 PM  [ Modified October 21st 2009 at 6:59 PM ] Post #4
	xcr440 Sundowners Trail Coordinator xcr440 has to go through the snowmobile trailer....sleds will be north next weekend. Updated Thursday at 1:45 PM 12570 Posts Group: Members Member Since: February 1st 2003 Location: St.Germain/Edgerton, Wisconsin, USA Current Sled: 03prox700/97xcr440 2008-2009 Miles: 610
	Quote originally posted by Charger400tx what size are the drive teeth? 3/8" Quote originally posted by Mad-Boondocker stihl is awesome I own 2 of them best saw I have ever bought I have no use for the bar I just bought a 3ft bar for my 044 and it is a little to big for my 250 The dealer said I could go to 20 inches It has an 18 on it I run a 32" and a 20" on my 044. I use a 18" on my 038 pro. So I really have no need for this 24" I used to have a 031 and I ran a 24" on that but when I was cutting oak it took alot to cut. So I sold it and got a used 044. I should have waited for a 046. But I got a good deal and the 44 is a wonderful saw. a good beer drinker isnt a picky beer drinker Loggers.... Working their ass off so you can wipe yours! "Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks. 2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains 1997 xcr440 my clutch kit, 380 mains,T-flow Rating: 0 Quick Edit Full Edit