helemt visors - looking for a helmet visor started by mxz440kid
	October 27th 2009 at 4:29 PM Post #1
	mxz440kid Junior Member 124 Posts Group: Members Member Since: November 22nd 2008 Location: Canada Current Sled: 1999 mxz 600h.o. 2008-2009 Miles: 2350
	hey guys, i was at the toronto snowmobile show a few weeks back, and i remember seeing there freestylers helmet visor, it looked pretty cool. if anyone else knows what im talking about and knows where i can find one. that would be sweet! this is not it, its just a picture of what the visor sort of looks like hahaha sorry for all this, i dont have any other ways to decribe it the 6" billet risers look sweet, can sounds sick :D ready for winterrrr Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	October 27th 2009 at 4:33 PM Post #2
	nhrider Junior Member nhrider Looking at an 06 Fusion 600 on Sunday morning! Updated Thursday at 7:57 PM 116 Posts Group: Members Member Since: August 22nd 2009 Location: Salem, New Hampshire, USA
	Does the helmet and visor look like a flat brimmed hat? If so, then I know what your talking about. Current Toys: 1998 Polaris Ultra 680 - 2 inch bar riser, Powermadd handguards 1989 Polaris Classic 500 - Comet Clutch 1989 Polaris Indy 500 - Parting Out 2008 Honda 50 - Pro Taper bars Past Toys: 2003 Polaris Edge xc 340 - Cobra Windsheild 1998 Yamaha srx 700 triple - sold 1996 Yamaha V-Max - smashed, fixed, blew up, junked Rating: 0 Quick Edit Full Edit

	October 27th 2009 at 4:54 PM  [ Modified October 27th 2009 at 5:13 PM ] Post #3
	Quinlan Department of Corrections Quinlan is a little disappointed that he received HMK Highmark 4 boots instead of the Highmark Pros as he had anticipated... Updated Yesterday at 6:19 PM 9720 Posts Group: Moderators Member Since: December 8th 2003 Location: Fargo, ND, USA Current Sled: 06 SP 440/700, 98 ZR 600 2008-2009 Miles: 365
	I'm guessing you saw a ProModel helmet...they were designed in part by Jimmy Blaze. I think they look like ass...kind of brings a new meaning to the term "asshat" IMO... http://promodelhelmets.com/products.cfm?...s&subcat=1 2006 Arctic Cat SnoPro 440/700 EFI 1998 Arctic Cat ZR 600 EFI Custom 1996 Ski-Doo FormulaIII 600 A mountain lion roaming the prairie found a bull, killed it and ate the entire bull. With a heavy belly, unable to walk, the lion laid in the tall grass moaning and roaring. Soon a hunter, attracted by the roaring, shot and killed the lion. Moral: When you're full of bull, keep your mouth shut! Rating: 0 Quick Edit Full Edit

	October 27th 2009 at 5:11 PM Post #4
	KingPrat Destroyer of Trailers KingPrat just got back from New Hampshire. Plans for trips made!!! Updated Thursday at 5:38 PM 1032 Posts Group: Members Member Since: September 13th 2008 Location: Saugerties, NY Current Sled: 2000 Polaris XC 700 SP 2008-2009 Miles: 200
	^^^ Those are quite 2000 XCSP 700: Edge rear suspension, 1.25 Ripsaw, 144 Accord Racing Warthog ZXP studs, Sportech Decals, Stripped Tunnel, 3" Riser, Gutted Airbox, Boyesen Rave Valves Rating: +1 Quick Edit Full Edit

	October 27th 2009 at 5:16 PM Post #5
	sledcrusher Junior Member 379 Posts Group: Members Member Since: August 10th 2009 Location: Maine, USA Current Sled: 2003 Rev 600 2008-2009 Miles: 1400
	I agree with Quinlan. Jimmy Blaze designed those helmets, and also owns the company that makes them, and they look horrid, but, jimmy was smart when he made them, because people did buy them. To each their own. Proud Supporter of Snowmobilers.com Rating: 0 Quick Edit Full Edit

	October 27th 2009 at 5:24 PM  [ Modified October 27th 2009 at 5:26 PM ] Post #6
	mxz440kid Junior Member 124 Posts Group: Members Member Since: November 22nd 2008 Location: Canada Current Sled: 1999 mxz 600h.o. 2008-2009 Miles: 2350
	those are them, but the ones they had were a smaller peak. those visors do look a little weird, but they are smaller and level with the ground, instead of up in the air. it looks alot batter. thanks for all the responses the 6" billet risers look sweet, can sounds sick :D ready for winterrrr Rating: 0 Quick Edit Full Edit

	October 27th 2009 at 6:56 PM  [ Modified October 27th 2009 at 6:57 PM ] Post #7
	2L8ULuz Junior Member 234 Posts Group: Members Member Since: June 21st 2005 Location: Chicago, IL, USA Current Sled: 07 600cfi / 95 xlt
	Save your money. I had one. The helmet was cracked and they still painted over it. They wetsanded dirt spots, but didn't buff all of them out. Had rubbing compound packed into the trim around the eyes. I called mountain machines who ships them out for pro model. I was like WTF, I told them I'm sending it back for a refund. There was no snell stickers or tags. I ask them about it, and they told me the stickers were not made. I'm guessing, because they aren't snell helmets. While I got a second helmet a few days later, Which I would of sent that one back too. The second one had very bad runs in the clear, all over the helmet. No pride in their product. No customer service from pro model. Mountain Machines shouldn't have to do his dirty work. I had to pay for two helmets to get shipped back, and never even got a full refund back. The POS didn't even refund me back the full amount for the helmet. This took over a few months, to get the money I did. Then jimmy emails me saying I'm not getting a full refund, until I send him pics of me. I emailed him back a handfull of times asking what pics have to do with it. He finaly got back to me months later, saying he wanted the pics to put on his site, B.S. He had the F'in nerve to tell me I should buy another helmet from him, because they are cheaper. I told him sure, knock the money you owe me off. He still wont return my emails after I said that. Rating: 0 Quick Edit Full Edit