stock pipe differece - is this going to effect my power? started by crdude
	October 27th 2009 at 6:11 PM Post #1
	crdude Local 495 willow billyS 1415 Posts Group: Members Member Since: December 23rd 2005 Location: Big Lake AK, USA
	My sled has a 98 engine in it, the stock 98 pipe/can set wouldnt work in my 2000 chassi. I had a 2000 800 pipe/can sitting in my parts so I used it... will this effect how my sled runs? 00 xc/rmk... the new frankinsled. 98 xc 700 79' camaro Z28 77' silverado. old trucks are pimp! Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	October 28th 2009 at 4:27 AM Post #2
	Ugly_old_Poo_kid techno-bumpkin 1087 Posts Group: Members Member Since: March 18th 2007 Location: Walworth, NY, USA Current Sled: 05 Edge & Frankenstorm II 2008-2009 Miles: 165
	If the 98 motor is an 800, probably not.. 95 - Storm 800 - Modded - AKA: FrankenStorm - Totalled near 100mph at Tug Hill! 96 - XLT/SP with Storm 800 trip/trip and now EFI - FrankenStorm II lives... 95 - RXL -- Sale Pending -- 05 - Edge 800 long track - Stayin' stock for now.. --------------------------------------------- It made me more compassionate, more empathetic, more nurturing... I FEEL LIKE I'M TRAPPED IN MY OWN WORST NIGHTMARE!!! Rating: -1 Quick Edit Full Edit

	October 28th 2009 at 9:41 AM Post #3
	ACEXLT THREE FOR ALL 5668 Posts Group: Members Member Since: September 17th 2002 Location: Greenfield, WI, USA Current Sled: '01 XCR 800 2008-2009 Miles: 1326
	Polaris didn't make a twin 800 in '98. '01 XCR 800 '00 Indy Triumph TRIPLES RULE!! TWINS HAVE NO BALLS!! Rating: +1 Quick Edit Full Edit

	October 30th 2009 at 3:56 AM Post #4
	crdude Local 495 willow billyS 1415 Posts Group: Members Member Since: December 23rd 2005 Location: Big Lake AK, USA
	yup my engine is a 700. Which would be why Im asking. 00 xc/rmk... the new frankinsled. 98 xc 700 79' camaro Z28 77' silverado. old trucks are pimp! Rating: +1 Quick Edit Full Edit

	October 30th 2009 at 4:19 AM Post #5
	shady800x Junior Member shady800x -20 degree weather...land is getting ready for snow! Updated Yesterday at 7:08 AM 197 Posts Group: Members Member Since: August 25th 2005 Location: Kipnuk, alaska, USA Current Sled: '03 Edge-X 800 2008-2009 Miles: not sure
	check the part number, see if it's the same from the manuals. i think it might work. there was some models have the same part number, stock that is for 7s and 8s i believe. 2003 Edge-X 800 Vforce 3 reeds, Powermadd Boost bottle, updated c.d.i. slp powder pro's, 1.25 predator track, fox racing clicker rear, rydefx center and skis, 1 in handle bar riser, specialty x can. 11.5 in cobra yellow tint windshield, and a sportech yellow tint lightshield. Rating: 0 Quick Edit Full Edit

	October 30th 2009 at 4:25 AM Post #6
	crdude Local 495 willow billyS 1415 Posts Group: Members Member Since: December 23rd 2005 Location: Big Lake AK, USA
	good thinking, the 00 700 engine was almost the same as the 98. So if the 00 700 and 800 use the same pipe it should work fine on my 98.. Ill have to look up numbers another day when Im not on dial up. 00 xc/rmk... the new frankinsled. 98 xc 700 79' camaro Z28 77' silverado. old trucks are pimp! Rating: 0 Quick Edit Full Edit

	October 30th 2009 at 11:22 AM  [ Modified October 30th 2009 at 11:23 AM ] Post #7
	Polaris_Parts_MN Junior Member 200 Posts Group: Members Member Since: October 8th 2008 Location: NW minneapolis suburbs, Minnesota, USA Current Sled: 1999 XC 500 2008-2009 Miles: 450
	you sure the 800 pipe is from a 2000? the only 800 twin polaris made in '00 was the 800 rmk. anyways, the 2000 800 pipe is only used on 2000-2001 800 RMKs. the pipe for a 700 is only interchangeable between 600 and 700 non-VES motors (2000 and 2001 in the gen2 chassis). cant tell ya if a 2000 700 pipe is the same as a 1998 700 pipe (wedge body) because they are different chassis's and the pipes are shaped differently, therefore have different part numbers. 1999 Polaris XC 500 -holeshot skid plate -fox reservoir front track shock -fox front shocks -xenon low-beam bulb (very helpful at night) Just add gas and snow! Rating: 0 Quick Edit Full Edit

	October 30th 2009 at 10:28 PM  [ Modified October 30th 2009 at 10:31 PM ] Post #8
	crdude Local 495 willow billyS 1415 Posts Group: Members Member Since: December 23rd 2005 Location: Big Lake AK, USA
	I know the 00 700 pipe is different then the 98 because they used a compleatly different setup. 98-99 6/700's used the same setup as each other, in 00' they went to a suit case can that exited the tub in a different place as was much quiter then the 98/99's, if I remember right the 00 pipe had a longer neck to them.. id have to pull my 98 pipe and compair to be sure. And Im sure its a 800 pipe because it has 00 800 rmk writen on it. I guess I will try it out and see if it runs normal or not. 00 xc/rmk... the new frankinsled. 98 xc 700 79' camaro Z28 77' silverado. old trucks are pimp! Rating: 0 Quick Edit Full Edit

	October 31st 2009 at 6:56 AM Post #9
	dodger WEDGE RIDER 1399 Posts Group: Members Member Since: October 24th 2003 Location: Central, Michigan, USA
	you will be o.k. I've never had a ten But I've had 5 two's GARAGE FULL OF WEDGIES 1998 XC 700 1998 XC 600 1998 XCF 440 1997 SKS 700 2003 Pro X oops thats an "edgie" 1976 tx 340 1972 colt 340 1974 John Deere 400 Rating: 0 Quick Edit Full Edit