|
 |
|
 |
 |
|
Premix when pump is not working
- Does it hurt to premix since pump is not working
started by dremmick
|
|
|
|
October 29th 2009 at 8:14 PM
|
|
| |
dremmick
Starting Member
|
7 Posts
Group: Members
Member Since: December 6th 2006
Location: Grand Forks, North Dakota, USA
|
|
|
|
| |
My 1999 mxz 600 oil pump went out a few years ago. I then rebuilt top end, and starting premixing 50:1. I still have the pump and everthing intact. Im just wondering if there is a line the goes to the crank bearings? I just want to make sure if I can continue running it like this.
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
October 29th 2009 at 8:15 PM
|
|
| |
|
Jeremy78
Starting Member
|
17 Posts
Group: Members
Member Since: October 28th 2009
Location: Gresham, Wisconsin, USA
Current Sled: 2000 Arctic Cat zr 600
2008-2009 Miles: 2,000
|
|
|
|
| |
|
|
|
|
|
|
October 29th 2009 at 9:45 PM
|
|
| |
|
dragon600mod
New Member
|
52 Posts 
Group: Members
Member Since: September 27th 2009
Location: waterloo, wi
|
|
|
|
| |
my buddy took his oil pump off years ago and runs premix, he just blocked off the oil pump hole with a plate
2006 fusion dragon
slp pipe
slp air box
v force three reeds
heavy hitter clutch kit
woodys gold digger studs
egt gauges
3 inch powermadd riser
sportech pad
|
|
|
|
|
|
October 29th 2009 at 10:11 PM
|
|
| |
|
440_jag
450 horse ditch bannger
|
1488 Posts 
Group: Members
Member Since: July 30th 2007
Location: Galesville, wisconsin, USA
Current Sled: 2002 zr 500 cce
2008-2009 Miles: 500
|
|
|
|
| |
Oh yeah you should be good to go. They actually make kits to block off the oil injection. All that oil goes right into the cylinders anyway
2002 Zr 500 CCE
D&D pipe ported polished y 6 inch riser Acerbis Handguards Chrome winshield Pro-glider Rack Rsi pad Ripped graphics Fox snow pro shocks clickers
|
|
|
|
|
|
October 30th 2009 at 1:19 PM
|
|
| |
dremmick
Starting Member
|
7 Posts
Group: Members
Member Since: December 6th 2006
Location: Grand Forks, North Dakota, USA
|
|
|
|
| |
do you know who makes the block of kits? also what ratio should i mix it?
|
|
|
|
|
|
October 30th 2009 at 4:01 PM
|
|
| |
|
Polaristhewayout
Rider of sleds
|
1008 Posts
Group: Members
Member Since: November 25th 2008
Location: Webster, South Dakota
Current Sled: 02 pro-x 440, Indy 500
2008-2009 Miles: 100
|
|
|
|
| |
My sled asks for 32:1 when running race fuel. Last year I just bought it so I ran 32:1 with pump gas. You should be fine with a little less oil than that.
|
|
|
|
|
|
October 30th 2009 at 4:10 PM
|
|
| |
|
Dumz1
Junior Member
|
197 Posts 
Group: Members
Member Since: January 21st 2009
Location: Holmen, Wi
Current Sled: 1997 XC 600
2008-2009 Miles: 850 +/-
|
|
|
|
| |
When in question run a little extra oil. I'd rather change a few plugs then a piston and bearings
1997 XC 600
2004 Sportsman 500HO
Parting out 1993 XLT and 1997 XCR 600
|
|
|
|
|
|
October 30th 2009 at 4:52 PM
|
|
| |
dremmick
Starting Member
|
7 Posts
Group: Members
Member Since: December 6th 2006
Location: Grand Forks, North Dakota, USA
|
|
|
|
| |
I think I will run 40:1 then
|
|
|
|
|
|
October 30th 2009 at 10:35 PM
|
|
| |
|
|
Polaristhewayout
Rider of sleds
|
1008 Posts
Group: Members
Member Since: November 25th 2008
Location: Webster, South Dakota
Current Sled: 02 pro-x 440, Indy 500
2008-2009 Miles: 100
|
|
|
|
| |
Quote originally posted by dremmick
I think I will run 40:1 then
Thats what I was going to say but didn't want to be responsible if I was wrong and your sled blew up.
|
|
|
|
|
|
November 1st 2009 at 6:33 PM
|
|
| |
|
barney
Junior Member
|
205 Posts
Group: Members
Member Since: November 23rd 2008
Current Sled: 2004 Arctic Cat F7
2008-2009 Miles: 2153
|
|
|
|
| |
32:1 or 40:1. 50:1 is to little oil imo.
|
|
|
|
|
|
November 1st 2009 at 8:09 PM
|
|
| |
dremmick
Starting Member
|
7 Posts
Group: Members
Member Since: December 6th 2006
Location: Grand Forks, North Dakota, USA
|
|
|
|
| |
|
|
|
|
|
|
November 1st 2009 at 8:25 PM
|
|
| |
|
|
dragon600mod
New Member
|
52 Posts
Group: Members
Member Since: September 27th 2009
Location: waterloo, wi
|
|
|
|
| |
for the block off kit, all you have to do is get a piece of sheet metal and cover the opening, drill some holes the same what your oil pump uses and put a little gasket sealer between the two surfaces
2006 fusion dragon
slp pipe
slp air box
v force three reeds
heavy hitter clutch kit
woodys gold digger studs
egt gauges
3 inch powermadd riser
sportech pad
|
|
|
|
|
|
November 2nd 2009 at 12:05 PM
[ Modified November 2nd 2009 at 12:23 PM
]
|
|
| |
|
MN_iq_600
drift bustin' ditch banger
|
151 Posts
Group: Members
Member Since: August 20th 2007
Location: McIntosh, minnesota, USA
Current Sled: 06 iqr 600
2008-2009 Miles: 100
|
|
|
|
| |
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
|
 |
|
