torq specs - 95 indy 500 liquid cooled rebuild started by polarisman86
	November 4th 2009 at 11:42 AM Post #1
	polarisman86 Starting Member 5 Posts Group: Members Member Since: October 25th 2009
	K i just bought new crank bearings for my sled got them installed now i have to put it all back together but i have no torq specs at all so im turning to the sled gods to help me out thanks Tom.. Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	November 4th 2009 at 4:28 PM Post #2
	EarnhardtNorth Junior Member 167 Posts Group: Members Member Since: June 13th 2007 Location: Ontario, Canada Current Sled: 1995 STORM 2008-2009 Miles: at a time
	head: 8mm 17-18 ftlbs, 10mm 24-26 ftlbs, base 24-28 ftlbs, crankcase 6mm 108 inlbs, 8mm 17-18 ftlbs, 10mm 23-25 ftlbs, fly wheel 60-65 ftlbs, engine mount strap bolts (7/16-14) 44-48 ftlbs Rating: 0 Quick Edit Full Edit

	November 4th 2009 at 4:52 PM Post #3
	EarnhardtNorth Junior Member 167 Posts Group: Members Member Since: June 13th 2007 Location: Ontario, Canada Current Sled: 1995 STORM 2008-2009 Miles: at a time
	Here's a better list: Head: (8mm) 17-18 ftlbs, (10mm) 24-26 ftlbs, Cylinder Base 24-28 ftlbs, Crankcase (6mm) 108 inlbs, (8mm) 17-18 ftlbs, (10mm) 23-25 ftlbs, Flywheel 60-65 ftlbs, Engine Mount to Engine (7/16-14) 44-48 ftlbs Engine Mount to Chassis (7/16) 45-50 ftlbs Exhaust Manifold Nut (5/16) 13-15 ftlbs Primary Clutch: Cover Bolts 90 inlbs Spider Jam Nut 235 ftlbs Spider 200 ftlbs Wight Pin (10-24) 30 inlbs Clutch Retaining Bolt (7/16) 45-50 ftlbs (14mm) 50ftlbs Driven Clutch retaining Bolt 15-17 ftlbs All specs taken from ’96-’98 Polaris Service Manual Rating: 0 Quick Edit Full Edit