z440 to 570 - will jugs and pistons from a 570f/c bolt to a 440f/c case? started by idoxlr8faster
	November 4th 2009 at 8:23 PM Post #1
	idoxlr8faster Starting Member 9 Posts Group: Members Member Since: November 1st 2009
	i have an 01 z440, lookingh to get a little more power. will jugs and pistons from the 570f/c motor bolt to the 440 block? if so are the crank rods different, and will the bolt in the case as well? or can i just run the bigger jugs/pistons for a displacement somewhere in between. is any of this doable or should i find a complete 570 motor? thanks! Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	November 4th 2009 at 8:46 PM  [ Modified November 4th 2009 at 8:46 PM ] Post #2
	Quinlan Department of Corrections Quinlan is a little disappointed that he received HMK Highmark 4 boots instead of the Highmark Pros as he had anticipated... Updated Friday at 6:19 PM 9723 Posts Group: Moderators Member Since: December 8th 2003 Location: Fargo, ND, USA Current Sled: 06 SP 440/700, 98 ZR 600 2008-2009 Miles: 365
	Please do not double post. You already started one topic which has had activity, so that one will remain open; this one will be locked. See original post here: http://www.snowmobilefanatics.com/forum/...splay.aspx 2006 Arctic Cat SnoPro 440/700 EFI 1998 Arctic Cat ZR 600 EFI Custom 1996 Ski-Doo FormulaIII 600 A mountain lion roaming the prairie found a bull, killed it and ate the entire bull. With a heavy belly, unable to walk, the lion laid in the tall grass moaning and roaring. Soon a hunter, attracted by the roaring, shot and killed the lion. Moral: When you're full of bull, keep your mouth shut! Rating: 0 Quick Edit Full Edit