|
firing issues on 2008 iq600rr
- is that any certain places where wirings tend to break and cause firing problems
started by lundrigan
|
|
|
|
February 8th 2012 at 3:00 PM
|
|
| |
lundrigan
Starting Member
|
7 Posts
Group: Members
Member Since: January 9th 2012
|
|
|
|
| |
is there any certain places that i could check for a broken wire that would cause my sled to fire off and on, like under the seat or gas tank or something?
|
|
 |
|
|
|
February 8th 2012 at 3:15 PM
|
|
| |
lundrigan
Starting Member
|
7 Posts
Group: Members
Member Since: January 9th 2012
|
|
|
|
| |
or can a voltage regulator cause firing probs, she started for a min then as soon as i touch the throttle she sputter and cut off, looses fire then and wont start for another while, sometimes she gives kick back all the pull cord, im after trying cdis, new stator, coils, and all switches and throttle sensor and still the same
|
|
|
|
|
|
February 9th 2012 at 7:11 AM
[ Modified February 9th 2012 at 7:15 AM
]
|
|
| |
Dman
Average Member
|
948 Posts 
Group: Members
Member Since: February 13th 2004
Location: Shell Lake, WI
Current Sled: 98 XC600, 01 800LE
|
|
|
|
| |
Throttle safety switch located on the throttle block checked?
|
|
|
|
|
|
February 9th 2012 at 8:47 AM
|
|
| |
|
|
| |
don't see a throttle safety switch on the parts breakdown for the rr...I know there is none on the r. I would inspect every wire connection for seating and corrosion. Sounds like it is something in the kill system...Does your tether work? Is there a handlebar kill system at all?
I've never had a ten But I've had 5 two's
GARAGE FULL OF POO
2003 Pro X oops thats an "edgie"
2008 IQR factory racer #44
2005 IQR
2001 Edge X
1998 xc 700
1976 tx 340
1972 colt 340
1974 John Deere 400
1974 John Deere JDX Special
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
