|
need some info on srv 540
- just traded and recieved 2 srv 540s
started by wantinsno
|
|
|
|
February 8th 2012 at 10:04 PM
|
|
| |
wantinsno
Starting Member
|
8 Posts
Group: Members
Member Since: February 8th 2012
|
|
|
|
| |
I have 2 srv 540s. I'm not sure the year ones running one for parts. I have an updated powdercoated susp for the rear and a new set of original skis and carbides that need to be swapped over but only seem to be missing a windshield. However the motor runs has a bog then takes off like a rocket ship. Now it will not start seems to fire once and in 2 pulls its flooded. Could this be just a carb cleaning that needs to be done?
|
|
 |
|
|
|
February 9th 2012 at 9:18 PM
|
|
| |
wantinsno
Starting Member
|
8 Posts
Group: Members
Member Since: February 8th 2012
|
|
|
|
| |
Also it looks like the carb tors has been bypassed already
|
|
|
|
|
|
February 15th 2012 at 10:39 PM
[ Modified February 15th 2012 at 10:40 PM
]
|
|
| |
|
decimator24
Starting Member
|
27 Posts
Group: Members
Member Since: December 28th 2011
Location: Bergland, Michigan, USA
Current Sled: 1987 yamaha phazer
|
|
|
|
| |
Quote originally posted by wantinsno I have 2 srv 540s. I'm not sure the year ones running one for parts. I have an updated powdercoated susp for the rear and a new set of original skis and carbides that need to be swapped over but only seem to be missing a windshield. However the motor runs has a bog then takes off like a rocket ship. Now it will not start seems to fire once and in 2 pulls its flooded. Could this be just a carb cleaning that needs to be done? Thats what I would start with a good carb cleaning
|
|
|
|
|
|
February 17th 2012 at 9:32 PM
|
|
| |
wantinsno
Starting Member
|
8 Posts
Group: Members
Member Since: February 8th 2012
|
|
|
|
| |
Thanks I cleaned it and bingo. Sled now starts on the first pull everytime cold or warm! I was wondering my oil light comes on when the brakes are applied and neither gauge works. I know that could be frozen cables and I know to check the jackshaft bearing. Another ? I have is the susp washers between the tunnel and susp. I removed one susp had 2 dished washers on the front and that's all I have for it. I would like to try using flat washers but I'm sure it will be a pain fighting the susp in and a washer at the last minute. Unable to get from yamaha dealer nor can I find any place with something similar. Any ideas would be very appreciated.
|
|
|
|
|
|
February 17th 2012 at 11:13 PM
|
|
| |
|
TRICKPaint
"fear is never boring"
|
4650 Posts 
Group: Members
Member Since: May 25th 2006
Location: Mount Vernon, OH, USA
Current Sled: '05 Renegade 600 HO-SDI
2010-2011 Miles: @440 miles
|
|
|
|
| |
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
