'03 RMK Engine Aplications started by ProjectRMK
	March 3rd 2004 at 4:14 PM Post #1
	ProjectRMK ...now rides a M1000 523 Posts Group: Members Member Since: March 3rd 2004 Location: Boise, ID, USA
	Hey everyone, new guy here. Hopefully I can tap into some of the expertise here. I hav a '03 Polaris RMK that was stolen and stripped that I'm wanting to put back together. I have some questions about what engine I can put back in it. It had a Liberty VES 600 in it, but I'd like to put a 700 or 800 in it now. Will an older, say '99 or so,non-ves twin bolt in where the Liberty was? What is the difference between the Liberty engines and the Pre-Liberty engines? Thanks, Chris Boise, Idaho USA Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	March 4th 2004 at 9:48 AM Post #2
	childsplay Junior Member 141 Posts Group: Members Member Since: September 16th 2003 Location: North Ogden, Ut, USA
	anything will work with modifications done rite I have switch almost all of my tripples to 700 and 800 twins and they are 95' to 96' sleds with 99' to 2003' motors in them so anything is possible wiht the rite know how Rating: 0 Quick Edit Full Edit

	March 4th 2004 at 10:39 AM  [ Modified March 4th 2004 at 10:41 AM ] Post #3
	RMK-KING The Fabricator Moderator 9123 Posts Group: Moderators Member Since: October 3rd 2002 Location: Center and Roseglen, ND, USA Current Sled: 09 RMK 700 & 06 IQr 600 2008-2009 Miles: 550
	The non VES have a little less power then the non VES, big blocks use a little more gas to so iv heard.. Current Line Up -09 RMK Assault -06 IQ R 600HO -01 ProX 600 -95 XCR 600 Days get shorter,snow gets deeper,life gets better. Rating: 0 Quick Edit Full Edit

	March 4th 2004 at 12:26 PM Post #4
	ProjectRMK ...now rides a M1000 523 Posts Group: Members Member Since: March 3rd 2004 Location: Boise, ID, USA
	Your confusing me a bit. The VES has a bit more power than the non-VES, right. I think you just have a typo in the first sentence. Will a '99 Twin bolt to the same mounts as a Liberty VES? Boise, Idaho USA Rating: 0 Quick Edit Full Edit

	March 5th 2004 at 2:52 AM Post #5
	childsplay Junior Member 141 Posts Group: Members Member Since: September 16th 2003 Location: North Ogden, Ut, USA
	dont know measure it. but if it dont just fab up some new mounts and stick her in there Rating: 0 Quick Edit Full Edit

	March 5th 2004 at 11:28 PM Post #6
	erick Alternate Realities erick pretty much excited that it's Friday, though there are no plans for the weekend yet! Updated Yesterday at 11:45 AM 11495 Posts Group: Administrators Member Since: April 10th 2001 Location: Strathcona, MN, USA Current Sled: IQr 800 & RMK 800 2008-2009 Miles: 800
	If you get the correct engine mounts for the new engine it should be a bolt in engine. Make sure the mounts are for the 03 big block and they should work. You will also need the right airbox pipe silencer throttle cable cdi and the mounting for them. It's not always as easey as it first seems. Breaking free from the thoughts in my mind Rating: 0 Quick Edit Full Edit