|
 |
|
 |
 |
|
Parting out Ultra SKS Come and get it Wedge Lovers
started by HighSierra
|
|
|
|
November 10th 2005 at 9:15 PM
|
|
| |
HighSierra
Average Member
|
957 Posts 
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
I've got two 35 tooth bottom gears, and a 22 tooth top gear (all 13 wide, all off the 96 Ultra)
The only thing I've sold out of the front suspension are the shocks and springs...I've got everything else, and nothing is bent.
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
November 22nd 2005 at 10:24 PM
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
To add to the sold list:
I No longer have the top gears out of the chain case (still have two 35tooth 13 wide bottom gears)
The windshield bag and the bar ends have also sold.
Stilll got lot's of stuff Including:
Fuel gauge/cap, Trailing arms, Spindles, Steering and Radius rods, Chain case, coolant and oil tanks, seat/gas tank (no cover), Coolers, Hoses, Carbs (vm 38's), cables, brake calliper, rotor, and Master cylinder, Handle bars with geated grips, throtle block, coils, fuel pump, wire harness, Secondary clutch....and that's about all I can think of, but by all means PM if you need anything for your Ultra or Wedge chassis!!!!
|
|
|
|
|
|
November 25th 2005 at 4:22 PM
|
|
| |
skidoojunkie
Junior Member
|
124 Posts 
Group: Members
Member Since: March 21st 2005
Location: whitmore lake, michigan, USA
|
|
|
|
| |
i need tie rods both and also heix with spring, please et me kno what you got and how much.
|
|
|
|
|
|
November 25th 2005 at 4:30 PM
|
|
| |
skidoojunkie
Junior Member
|
124 Posts
Group: Members
Member Since: March 21st 2005
Location: whitmore lake, michigan, USA
|
|
|
|
| |
|
|
|
|
|
|
November 26th 2005 at 10:47 AM
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
PM'd ya about that stuff!
|
|
|
|
|
|
November 27th 2005 at 11:49 AM
|
|
| |
Garceau
Advanced Member
|
1044 Posts 
Group: Members
Member Since: October 23rd 2005
Location: Mauston, WI
|
|
|
|
| |
Hood.... dont know the ability to ship though. Looking for a clean not cracked wedge hood for my XLT
|
|
|
|
|
|
November 28th 2005 at 10:47 PM
|
|
| |
spanky1
Junior Member
|
133 Posts
Group: Members
Member Since: April 4th 2005
Location: Drayton Valley, Alberta, Canada
|
|
|
|
| |
If you can tell me if the trailing arms will fit a '92 Indy 500 I'll take them. Possibly the nose cone too. How does the shipping and payment work?
That's your mom's sled right? You're just riding that one till yours is fixed.
|
|
|
|
|
|
December 8th 2005 at 7:40 PM
[ Modified December 8th 2005 at 7:42 PM
]
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
I tend to think that the trailing arms won't fit that indy 500..... One way to see for certain is to go to one of the microfiche parts websites and cross referance the part number with the sled mine came off (96 Ultra sks) and yours.....
Being you're in Canada, shipping on trailing arms might be a killer.... As far as customs, I have no problem making it som you don't have to pay much (if any ) import taxes (a slight exageration/under-estimate on the parts value when filling out the customs form)
PM me if they'll wotk and you're interested.
STILL GOT PARTS FOR THOSE IN NEED !!!
Ohh yeah, and the hood has allready been sold, sorry
|
|
|
|
|
|
December 13th 2005 at 11:34 AM
|
|
| |
|
Stoned_Cat
New Member
|
64 Posts 
Group: Members
Member Since: October 19th 2005
Location: Warren, MI, USA
Current Sled: 99 700 XC SP
2008-2009 Miles: 700
|
|
|
|
| |
Do you still have the carbs???
"There's no such thing as a soul. It's just something they made up to scare kids, like the bogeyman or Michael Jackson."
|
|
|
|
|
|
December 14th 2005 at 8:22 PM
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
I do...PM me if interested
|
|
|
|
|
|
December 16th 2005 at 5:58 PM
|
|
| |
p8ntballer006
Starting Member
|
1 Posts
Group: Members
Member Since: December 16th 2005
Location: chesterfield, michigan, USA
|
|
|
|
| |
|
|
|
|
|
|
December 18th 2005 at 11:58 AM
|
|
| |
|
muskyman35
Yamaha Vmax 4
|
75 Posts
Group: Members
Member Since: December 18th 2005
Location: St.Cloud, Minnesota, USA
Current Sled: 94&96 VMAX 4
2008-2009 Miles: 1850
|
|
|
|
| |
Was wondering if you still have the trailing arms looking for a right hand trailing arm for 96 500 if so how much and shipping also.
|
|
|
|
|
|
January 10th 2006 at 12:08 AM
|
|
| |
CrazyMountainGuy
Junior Member
|
295 Posts
Group: Members
Member Since: November 12th 2005
Location: Michigan, USA
|
|
|
|
| |
Do you still have the silencer (can)?
DO NOT BUY ANYTHING FROM CHAPMANS SPORTS CENTER IN MICHIGAN!!
OR WORK THERE!! WORST POLARIS DEALER YET!
IM SURE YOU DONT WANT ANY HACKS WORKING ON YOUR STUFF DO YA??
|
|
|
|
|
|
January 20th 2006 at 7:36 PM
|
|
| |
Raptor
New Member
|
80 Posts
Group: Members
Member Since: January 2nd 2006
Location: Lakeville, MN, USA
|
|
|
|
| |
Do you still have the seat? Do you know if it will fit a 94 indy sport????
|
|
|
|
|
|
January 24th 2006 at 2:30 PM
|
|
| |
680Triple
Starting Member
|
11 Posts
Group: Members
Member Since: January 24th 2006
Location: AK, USA
|
|
|
|
| |
Is that clutch stock? how much for the clutch, trailing arms and tie rods?
|
|
|
|
|
|
February 6th 2006 at 6:46 PM
[ Modified February 6th 2006 at 6:48 PM
]
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
Allright Wedge Lovers.... Here is all that I have left off my 96 Ultra:
-Tunnel/Bulkhead/bellypan (gotta pick that one up, so if you don't live near California, forget it)
-Coils/fuel pump/rack
-coolant hoses
-Heat exchangers
-Airbox
-seat/tank combo (the cover is shot, So if you buy this it's because your fuel tank leaks)
-Secondary Clutch
-Chain Case (also have a 35 tooth bottom gear, 20 tooth top gear, and the chain)
-Clutch weights (Two sets...10M and 10 AL)
-Primary Clutch springs (a gold one, a light blue one, and a dark blue one)
-Oil and Coolant tanks with caps
-Wire Harness with voltage regulator
-Stock Polaris Pistons out of a 680 (in great condition, just need rings)
-Mikuni VM 38 Carbs (all three with the throtle and choke cables)
-complete brake setup (Master cylinder, water cooled calliper, and brake rotor)
-Stock handle bars with mounting block, Hand-warmers, hi-beam switch, & kill switch/throtle setup
-Powder Pro Saddle mounts for Polaris sleds
That's about all that's left!!!
PM me if interested!!
|
|
|
|
|
|
March 14th 2006 at 3:05 PM
|
|
| |
680Triple
Starting Member
|
11 Posts
Group: Members
Member Since: January 24th 2006
Location: AK, USA
|
|
|
|
| |
Do you have the crank? i need a crank or im done riding this year
|
|
|
|
|
|
November 25th 2006 at 8:26 PM
[ Modified November 25th 2006 at 8:28 PM
]
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
Bringing back an old Post.. I Still have some things left, and all the pictures are allready here...Some things Include:
-Chain Case (both case, cover, gasket, and tensioner) and I think the bearings are still in there (best to get new seals at the minimum)
-Chain (lots of life left in this chain (13w)
-Mounting rack for coils and Fuel pump (with Coils and fuel pump both of which worked fine the last time the sled ran)
-Carbs (VM 38's) all three with both choke and throtle cables
-Wire harness with voltage regulator (no bad issues)
-Coolant and oil bottles (not sure if I have the cap for the coolant bottle)
-Secondary clutch (comes with stock helix and I think I have another along with some springs (decent condition)
-Primary clutches (some possible issues email for details if interested)
-Trailing arms and spindles
-Tunnel and Belly Pan (comes with title, great condition, local pickup only unless you're really desperate and want to pay shipping)
-Coolers (both running board and tunnel availible, and I think I have all the hoses...may go with tunnel or sepperate, whichever comes first)
email me (best) at noneill42@hotmail.com or PM me if interested in anything... I can take some pictures and help ya out if need be. Generaly speaking, Things that have nuts and bolts associated with them, will come with those nuts and bolts.
As far as prices, make me a a reasonable offer and I'll take it. i can send stuff UPS or USPS, and can take payment via Pay Pal or you can send a money order.
Everything is off a 96 Polaris Ultra SKS
|
|
|
|
|
|
November 26th 2006 at 4:34 PM
|
|
| |
|
Clouse2411
Advanced Member
Clouse2411 has the drop and rolled templates on. Should have the track, rear skid and motor in tommarow (: Winter is comming.
Updated Thursday at 9:57 PM
|
1338 Posts
Group: Members
Member Since: July 18th 2006
Location: Tiffin, OH, USA
Current Sled: 93 Polaris XLT 650 RMK
|
|
|
|
| |
do u still hv the guages?
1997 Ford F-350 XLT
Reg Cab, Long Bed, 7.3L Powerstroke, 2.2k resistor, 3in Downpipe, 5in Single Stack, 2 12in Subs, 1000 Watt Sony Amp, Sony Head Unit,And Custom Air Intake
1993 Polaris XLT 650 RMK
Indy 650 Motor, PSI Modblaster Pipes, Clutched And Geared, Kimpex Plastic Ski's, Polished Tunnel and Bumpers, Black-out Headlight Cover, Gravity-Worx Racing Throttle Cable, Low Black Windshield, Gen II Jackshaft And Chaincase, ODI 8in Grips, RSI handlebar hooks, 136x1.25 Polaris Take-off, Homemade Tunnel Extension, Edge Rear Skid, Nosecone Mounted Fog Lights, Sno-Stuff Light Weight Hood, 4 Display Digatron, Billet Throttle Block, Chrome PowerMadd Handguards, Light-Weight Brake Rotor, Black PowderCoated Skid and Heads, Custom Console, Skidplate, And Bumper, Cometic Gasket Kit, WMS Support Block, Edge Flap, Edge Coolant Bottle, SLP High-Flow Airbox, Moved Running Board Coolers, Carbon Fiber Wrap, Chrome Trim, TracksUSA Rail Extensions, Xtra 10 Shocks, Shorty Seat, Edge Tank, Chromoly Trailing Arms And Radius Rods, Tison Dropped And Rolled Chaincase, And Rear Skid Moved Back 2.5in.
To Come:
Pro-X Brake
XC Spindles
Straight Bars
6061 Auminum Radius Rods
6.25-8in Rox Adjustable Riser
|
|
|
|
|
|
November 27th 2006 at 5:50 PM
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
sorry but the gauges have been sold.
A couple other things i didn't mention that I still do have are:
Everything for the brakes (rotor, water cooled calliper, and master cylinder/handle)
-Matched set of stock pistons in good condition (have the rings but you probably want new)
-Exhasut manifod
I want to get rid of this stuff, and don't care to get rich!!!
|
|
|
|
|
|
November 28th 2006 at 6:13 AM
|
|
| |
nextel9
Starting Member
|
25 Posts
Group: Members
Member Since: October 21st 2006
Location: Muskegon, Mi, USA
|
|
|
|
| |
How much for seat shipped to 49441?
|
|
|
|
|
|
November 28th 2006 at 6:46 PM
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
|
|
|
|
|
|
November 30th 2006 at 6:59 PM
|
|
| |
|
|
Clouse2411
Advanced Member
Clouse2411 has the drop and rolled templates on. Should have the track, rear skid and motor in tommarow (: Winter is comming.
Updated Thursday at 9:57 PM
|
1338 Posts
Group: Members
Member Since: July 18th 2006
Location: Tiffin, OH, USA
Current Sled: 93 Polaris XLT 650 RMK
|
|
|
|
| |
do u still have the main cooler that is in front of the track?
1997 Ford F-350 XLT
Reg Cab, Long Bed, 7.3L Powerstroke, 2.2k resistor, 3in Downpipe, 5in Single Stack, 2 12in Subs, 1000 Watt Sony Amp, Sony Head Unit,And Custom Air Intake
1993 Polaris XLT 650 RMK
Indy 650 Motor, PSI Modblaster Pipes, Clutched And Geared, Kimpex Plastic Ski's, Polished Tunnel and Bumpers, Black-out Headlight Cover, Gravity-Worx Racing Throttle Cable, Low Black Windshield, Gen II Jackshaft And Chaincase, ODI 8in Grips, RSI handlebar hooks, 136x1.25 Polaris Take-off, Homemade Tunnel Extension, Edge Rear Skid, Nosecone Mounted Fog Lights, Sno-Stuff Light Weight Hood, 4 Display Digatron, Billet Throttle Block, Chrome PowerMadd Handguards, Light-Weight Brake Rotor, Black PowderCoated Skid and Heads, Custom Console, Skidplate, And Bumper, Cometic Gasket Kit, WMS Support Block, Edge Flap, Edge Coolant Bottle, SLP High-Flow Airbox, Moved Running Board Coolers, Carbon Fiber Wrap, Chrome Trim, TracksUSA Rail Extensions, Xtra 10 Shocks, Shorty Seat, Edge Tank, Chromoly Trailing Arms And Radius Rods, Tison Dropped And Rolled Chaincase, And Rear Skid Moved Back 2.5in.
To Come:
Pro-X Brake
XC Spindles
Straight Bars
6061 Auminum Radius Rods
6.25-8in Rox Adjustable Riser
|
|
|
|
|
|
December 1st 2006 at 4:24 PM
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
Clouse, The 96 Ultra SKS only had the 2 runing board coolers, and 2 rear coolers.. They didn't have a cooler up where the track turns around the drivers (or in otherwords,no cooler on the bulkhead)
|
|
|
|
|
|
December 4th 2006 at 6:47 PM
|
|
| |
HighSierra
Average Member
|
957 Posts
Group: Members
Member Since: January 20th 2003
Location: USA
|
|
|
|
| |
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
|
 |
|
