|
New Bar Riser's on the market
started by XCR600-RACER
|
|
|
|
January 18th 2007 at 9:49 PM
|
|
| |
XCR600-RACER
New Member
|
69 Posts 
Group: Members
Member Since: September 4th 2005
Location: Buffalo, MN, USA
|
|
|
|
| |
Check out these new bar riser's. Throne Industries makes these in 6061 T6 polished or brushed aluminum. sizes 3,4,5,6,7 and 8 inch. Tell me what you think.
Thanks for your comments
 New Bar Risers  New bar riser
|
|
 |
|
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
|
January 19th 2007 at 7:42 AM
|
|
| |
|
Timber500
Plays in snow
|
661 Posts 
Group: Members
Member Since: February 3rd 2006
Location: Ronald, WA, USA
|
|
|
|
| |
Looks like the Fly risers, also looks like the ones that someone on Snowest makes also. Can't find anything on Throne industries. Where did you see them? Who sells them???
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."
99 RMK 700 new for 07: New crank with SLP bearing upgrade, SLP porting, Swain-tech coated OEM pistons, SLP head, SLP single VF3 reeds SLP air box mod, power packs clutched, streched to 151"
02 Summit Highmark 800X
89 Jag 440 AFS
I need snow!!!!!
|
|
|
|
|
|
|
January 19th 2007 at 8:14 AM
|
|
| |
|
Sledheadx69
Junior Member
|
443 Posts 
Group: Members
Member Since: May 23rd 2006
Location: New York, USA
|
|
|
|
| |
Just my .02, but i dont think they look like they would be to reliable... maybe im looking at the picture wrong but wouldnt you think that some type of cross brace should be built in to the riser like powermadds bar rise?
|
|
|
|
|
|
|
January 19th 2007 at 1:02 PM
[ Modified January 19th 2007 at 1:04 PM
]
|
|
| |
XCR600-RACER
New Member
|
69 Posts
Group: Members
Member Since: September 4th 2005
Location: Buffalo, MN, USA
|
|
|
|
| |
Quote Originally posted by Timber500
Looks like the Fly risers, also looks like the ones that someone on Snowest makes also. Can't find anything on Throne industries. Where did you see them? Who sells them???
These don't even come close to looking like fly's or snow west stuff better looking and to answer the question of strength I had a powermad block and pivot, These are lighter and as strong or stronger. Throne is some what of a new company making articulit and pivot block riser's, bars, break handles and front suspension rods and trailing arms.
Thanks for you comments
|
|
|
|
|
|
|
January 19th 2007 at 2:02 PM
|
|
| |
|
xcr440
wood butcher
xcr440 was laid off for the winter...woohoo, time to hit the woods and harvest some venison.
Updated Tuesday at 8:12 AM
|
9841 Posts 
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
Miles Last Season: 864
Miles This Season: 1600
|
|
|
|
| |
Looks nice and clean but I'll keep my isovibe.
Triples are like fat chicks, When you ride one your friends make fun of ya, but they give you a hell of a ride like its thier last.
2003 Pro x 700
1997 xcr440
1998 Indy 500
1987 Indy sport
|
|
|
|
|
|
|
January 19th 2007 at 3:38 PM
|
|
| |
|
|
Timber500
Plays in snow
|
661 Posts
Group: Members
Member Since: February 3rd 2006
Location: Ronald, WA, USA
|
|
|
|
| |
I think they look very simmilar to the ones on Snowest:
Little different shape, but simmilar.
Fly's are a bit different, but same principal:
They do look good though. How much are they running, and where do you get them?
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."
99 RMK 700 new for 07: New crank with SLP bearing upgrade, SLP porting, Swain-tech coated OEM pistons, SLP head, SLP single VF3 reeds SLP air box mod, power packs clutched, streched to 151"
02 Summit Highmark 800X
89 Jag 440 AFS
I need snow!!!!!
|
|
|
|
|
|
|
January 20th 2007 at 3:32 PM
[ Modified January 20th 2007 at 3:40 PM
]
|
|
| |
XCR600-RACER
New Member
|
69 Posts
Group: Members
Member Since: September 4th 2005
Location: Buffalo, MN, USA
|
|
|
|
| |
The company is located in buffalo, MN. My 8in ones were $80.00 for polished aluminum $75.00 for brushed. They are setting up a web site soon to look at the products they make. If anyone is interested in more info let me know.
P.S I removed my powermadd pivot riser and put them on my sled last night I will be selling my powermadd one for sure.
Thanks.
 New risers installed
|
|
|
|
|
|
|
January 20th 2007 at 4:28 PM
|