Home

 

Forum

 

Polaris

	INDY 650 seat ? started by scott6824
	January 23rd 2007 at 10:30 PM Post #1
	scott6824 Starting Member 41 Posts Group: Members Member Since: February 14th 2006 Location: jefferson, wi, USA
	Im trying to take off the seat on my 1990 Indy 650.. there are 2 bolts in the tunnel that I think are holding it on.. is that right?.. anyways the bolts are rusty.. I turn and turn and they are not coming out... the sides off the seat near the bottom need to be re-attached.. the stapes are pulled out .. I can see under there and looks like a piece of wood is all rotten.. would a polaris dealer have a new piece of wood for me or do I just go to a lumber yard and cut a new one.. looked like some padding too look kinda shakey.. would I just pry up with a big screw driver to get the seat off with the bolts just turning .. thanks scott Rating: 0 Quick Edit Edit Topic
	Site Supporter Group: Site Supporters
	January 23rd 2007 at 11:14 PM Post #2
	butcher_boy Numbnuts 1532 Posts Group: Members Member Since: October 3rd 2005 Location: Hugo, Mn, USA
	On my '90 indy 500 there are 2 carriage bolts that stick up into the trunk close to the taillight housing. I easily snapped those 1/4" bolts right off. After that, the seat slid back and off it was. I imagine the 650 seat is the same. "when you go out to kick ass....kick ass."-Dale Earnhardt sr. Rating: 0 Quick Edit Full Edit
	January 23rd 2007 at 11:32 PM Post #3
	Triple650Indy Newest Carb Tinkerer 5399 Posts Group: Members Member Since: March 18th 2005 Location: Appleton, WI, USA
	Yes, Identical. I would just cut a new piece of wood and dry out your foam and see if it's worth saving. I did this on my seat. Have a peak. RXL Seat Cause I don't give a rats about who took second or 12th for that matter your just the next loser in a long line of many losers. Rating: 0 Quick Edit Full Edit