Carb settings for SPX started by 97SPX680
	February 23rd 2007 at 9:54 AM Post #1
	97SPX680 Junior Member 171 Posts Group: Members Member Since: November 10th 2006 Location: Siren, WI, USA
	I was wondering if anyone could tell me the proper carb set-up for my SPX. I would like to know all the stock settings fo I can compare what mine is calibrated at vs where it should be. I think it is pretty rich at idle and part throttle and perhaps a little lean at WOT. Lots of sleds..... Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	February 23rd 2007 at 10:02 AM Post #2
	polaris1 Junior Member 175 Posts Group: Members Member Since: January 4th 2005 Location: Shell Lake, WI, USA
	Main Jets 380's across the board Pilot jets #50's Here is where I foud it.. http://www.bristowsinc.com/fiche_section...detail.asp Rating: 0 Quick Edit Full Edit

	February 23rd 2007 at 10:06 AM  [ Modified February 23rd 2007 at 10:19 AM ] Post #3
	97SPX680 Junior Member 171 Posts Group: Members Member Since: November 10th 2006 Location: Siren, WI, USA
	It has 340's and Either 50's or 55's in it. Do you know what the needle setting is supposed to be? Lots of sleds..... Rating: 0 Quick Edit Full Edit

	February 23rd 2007 at 10:19 AM  [ Modified February 23rd 2007 at 10:25 AM ] Post #4
	polaris1 Junior Member 175 Posts Group: Members Member Since: January 4th 2005 Location: Shell Lake, WI, USA
	I would think it would be the Center Position. But cant say for sure Poo's come real rich out of the box. But 340's seems real lean. Rating: 0 Quick Edit Full Edit

	February 23rd 2007 at 6:08 PM Post #5
	Ultra680 Senior Member 2235 Posts Group: Members Member Since: June 5th 2004 Location: Anywhere, Everywhere, USA Current Sled: 2000 XCR 800 2008-2009 Miles: 1300
	Look here. http://parts.polarisind.com/Browse/Browse.asp Rating: 0 Quick Edit Full Edit