1 Pages
1
 
Water temp gauge ZRT 101 started by R6erbuyafool
March 15th 2007 at 8:28 PM  [ Modified February 11th 2008 at 9:09 PM by arcticcatmatt ]
 
R6erbuyafool
Junior Member
Send this user an email message Send this user a private message View this users gallery View this users blog
180 Posts
Group: Members
Member Since: February 6th 2007
Location: Hamilton, Michigan, USA
 
 
Ok here are the pics on the mod 1st get appropriate hole saw size drill in "dash" where desired(keep in mind the length of the wire)

This is the dash view after hole drilled and gauge installed


This is the rear view


Here is where you get power for your backlight, pull him out


These are the wires you tap into to get your backlight


Here is where i ran the temp wire, going over the exhaust is fine because the actual wire is in the coil wire thus protecting from heat.



Then after you have drained you coolant you take out the adapter that was in here


and put this one in


Then just put the old wire somewhere, i put mine attached to the new one



1996 Arttic cat ZRT 600
V force reeds
Comet clutch
Othwise stock stock stock

Always looking for riding buddies in Michigan
These are some homemade videos of me on the Sled, check 'em out:




Rating:
0
 
 
 
Site Supporter
Group: Site Supporters
 
 
 
March 15th 2007 at 8:57 PM
 
arcticcatmatt
Spleen Splitter
arcticcatmatt leaving after work for 3 days of shotgun season back home!
Updated Friday at 12:16 PM
Send this user an email message Send this user a private message View this users gallery View this users blog
14007 Posts
Group: Moderators
Member Since: November 25th 2001
Location: Berkshire, NY, USA
Current Sled: 96/97 ZRT 600
2008-2009 Miles: 450
 
 
NICE! Thanks for making this a how to when I suggested it man.

Now.. I am wondering. You unplugged the sensor for your idiot light. So now you have no idiot light?

oh.. and you should add add "101" to your topic title.. then it should get sticky'd.




Rating:
0
 
March 15th 2007 at 11:00 PM
 
R6erbuyafool
Junior Member
Send this user an email message Send this user a private message View this users gallery View this users blog
180 Posts
Group: Members
Member Since: February 6th 2007
Location: Hamilton, Michigan, USA
 
 
Yeah but now your no dummy so just watch your temp right around 130 is running temp im told



1996 Arttic cat ZRT 600
V force reeds
Comet clutch
Othwise stock stock stock

Always looking for riding buddies in Michigan
These are some homemade videos of me on the Sled, check 'em out:




Rating:
0
 
March 16th 2007 at 8:35 AM
 
arcticcatmatt
Spleen Splitter
arcticcatmatt leaving after work for 3 days of shotgun season back home!
Updated Friday at 12:16 PM
Send this user an email message Send this user a private message View this users gallery View this users blog
14007 Posts
Group: Moderators
Member Since: November 25th 2001
Location: Berkshire, NY, USA
Current Sled: 96/97 ZRT 600
2008-2009 Miles: 450
 
 
^ I am going to wire it up so the dummy light still works. Something tells me that me bombing around I am not going to be watching that gauge. So, if a light lights up, I notice that.

Summer projects rule




Rating:
0
 
March 16th 2007 at 10:00 PM
 
R6erbuyafool
Junior Member
Send this user an email message Send this user a private message View this users gallery View this users blog
180 Posts
Group: Members
Member Since: February 6th 2007
Location: Hamilton, Michigan, USA
 
 
well i have heard that guys using the T adapter wich is what i imagine you will use have not had very much luck



1996 Arttic cat ZRT 600
V force reeds
Comet clutch
Othwise stock stock stock

Always looking for riding buddies in Michigan
These are some homemade videos of me on the Sled, check 'em out:




Rating:
0
 
1 Pages
1
1 user(s) are reading this topic (0 Members and 1 Guests)





© 2001-2009 Snowmobile Fanatics. All rights reserved.
  Ads By Outsidehub | Hosted By Wiktel | Donate | Advertise Execution in 0 seconds using 20 queries

Loading...