Polaris Ultra...Final Part out!! - I gotta get this stuff out of my Garage,....Bargin Prices! started by HighSierra
	September 29th 2007 at 1:20 PM Post #1
	HighSierra Average Member 957 Posts Group: Members Member Since: January 20th 2003 Location: USA
	I'm sick of looking at the parts that I didn't get rid of yet that came off a 96 Ultra that I parted out a couple of years ago...>So just tto give them some use, I'm sure there are a few of you out there rolling the old Wedge Chassis still, and could use parts for CHEAP!! Here's what I remember that I have: Carbs: VM38's in good condition with the cables Chaincase: with some gears and a chain Coils: All worked fine when the engine last ran Heat exchangers Clutches: Primary and secondary Trailing Arms: both right and left exhaust manifold Tunnel with belly pan and bulkhead: Local pickup only there Coolant hoses Coolant and oil tanks As for prices.... make a reasonable offer, and plan on paying the shipping. That's about all I can remember...Everything is in great shape, if it was bent or broken I would have just tossed it, so no junk parts here. Best way to get a hold of me is thru email, as I'm not really on these forums too often anymore (but I post here as I know there are probably more old school polaris folks here than anywhere else!) Feel free to email me if you need something random and I'll see if I still have it.. noneill42@hotmail.com Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	September 30th 2007 at 8:52 PM Post #2
	Clouse2411 Advanced Member Clouse2411 has the drop and rolled templates on. Should have the track, rear skid and motor in tommarow (: Winter is comming. Updated Thursday at 9:57 PM 1338 Posts Group: Members Member Since: July 18th 2006 Location: Tiffin, OH, USA Current Sled: 93 Polaris XLT 650 RMK
	How much for the rear cooler? I need the hoses too. 1997 Ford F-350 XLT Reg Cab, Long Bed, 7.3L Powerstroke, 2.2k resistor, 3in Downpipe, 5in Single Stack, 2 12in Subs, 1000 Watt Sony Amp, Sony Head Unit,And Custom Air Intake 1993 Polaris XLT 650 RMK Indy 650 Motor, PSI Modblaster Pipes, Clutched And Geared, Kimpex Plastic Ski's, Polished Tunnel and Bumpers, Black-out Headlight Cover, Gravity-Worx Racing Throttle Cable, Low Black Windshield, Gen II Jackshaft And Chaincase, ODI 8in Grips, RSI handlebar hooks, 136x1.25 Polaris Take-off, Homemade Tunnel Extension, Edge Rear Skid, Nosecone Mounted Fog Lights, Sno-Stuff Light Weight Hood, 4 Display Digatron, Billet Throttle Block, Chrome PowerMadd Handguards, Light-Weight Brake Rotor, Black PowderCoated Skid and Heads, Custom Console, Skidplate, And Bumper, Cometic Gasket Kit, WMS Support Block, Edge Flap, Edge Coolant Bottle, SLP High-Flow Airbox, Moved Running Board Coolers, Carbon Fiber Wrap, Chrome Trim, TracksUSA Rail Extensions, Xtra 10 Shocks, Shorty Seat, Edge Tank, Chromoly Trailing Arms And Radius Rods, Tison Dropped And Rolled Chaincase, And Rear Skid Moved Back 2.5in. To Come: Pro-X Brake XC Spindles Straight Bars 6061 Auminum Radius Rods 6.25-8in Rox Adjustable Riser Rating: 0 Quick Edit Full Edit

	October 13th 2007 at 1:42 PM Post #3
	HighSierra Average Member 957 Posts Group: Members Member Since: January 20th 2003 Location: USA
	Somebody must still have an Ultra that they love and need spare for it!! Still have all that stuff mentioned above! Rating: 0 Quick Edit Full Edit

	October 15th 2007 at 7:34 PM Post #4
	HighSierra Average Member 957 Posts Group: Members Member Since: January 20th 2003 Location: USA
	ttt Rating: 0 Quick Edit Full Edit