Edge skid problems started by sled_porn_666
	October 26th 2007 at 12:36 PM  [ Modified October 26th 2007 at 1:37 PM by arcticcatmatt ] Post #1
	sled_porn_666 Starting Member 40 Posts Group: Members Member Since: January 7th 2007 Location: Dauphin, Maniotba, Canada
	hey i put a 136 slp kit on my edge skid and now I'm have some transferring problems... i when my sled is sitting on level ground only the last 2ft of the track is touching the ground ... so i was wondering if i have to relocate my skid ... if so does anyone know where to drill the holes to do that .... if not then just tell me what i have to adjust in the skid .. thanks Moved here because this is where you ask for help on your suspension. I also changed your topic title. The more descriptive you are the better. Welcome to the forum. ACM Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	October 27th 2007 at 3:23 PM Post #2
	SKE if you can't stand the heat, become a cop 167 Posts Group: Members Member Since: January 28th 2007 Location: Petoskey, mi, USA Current Sled: 98 xc with 800ves 2008-2009 Miles: 50
	if you can post a pic of it. i put a tracksusa 136 kit on my edge susp thats in a 98 xc and had no problems Rating: 0 Quick Edit Full Edit

	October 27th 2007 at 3:28 PM Post #3
	Darkstar The Modificator Moderator 3675 Posts Group: Moderators Member Since: October 19th 2001 Location: Mound, MN, USA
	You should not need to relocate your skid. Couple of questions. Did you do anything else to the skid while you were extending it? (Take it apart, etc....) Did you mount the rear of the skid in the bottom or top holes? " If an experiment works, something has gone wrong." Sled Showcase: http://www.snowmobilefanatics.net/Darkstar Rating: 0 Quick Edit Full Edit

	October 29th 2007 at 10:17 AM Post #4
	sled_porn_666 Starting Member 40 Posts Group: Members Member Since: January 7th 2007 Location: Dauphin, Maniotba, Canada
	no i never took the skid apart then i put the 136 just bold on the extenions and put it back in ... the rear is bolted on the bottem hole ... its been like that since i bought the sled ... the top hole isn't even drilled out ... but i did notice that my limiting straps are like guitar string tight the front shock was backed all the was down ... Rating: 0 Quick Edit Full Edit

	October 29th 2007 at 11:45 AM Post #5
	xltmoded X 2 tha L 2 tha T! 1044 Posts Group: Members Member Since: September 26th 2007 Location: Right behind you, Ontario, Canada
	hmm i would drop the front down there should be a pilot hole that you can drill out right under neath the front hole. If you want to play with the big dogs quit pissin like a puppy!!!! Rating: 0 Quick Edit Full Edit

	October 29th 2007 at 12:45 PM Post #6
	sled_porn_666 Starting Member 40 Posts Group: Members Member Since: January 7th 2007 Location: Dauphin, Maniotba, Canada
	the front is already set to the bottem hole its was there from factory .. i have the edge x Rating: 0 Quick Edit Full Edit

	October 30th 2007 at 9:20 PM Post #7
	Ultra680 Senior Member 2235 Posts Group: Members Member Since: June 5th 2004 Location: Anywhere, Everywhere, USA Current Sled: 2000 XCR 800 2008-2009 Miles: 1300
	Need pic's Rating: 0 Quick Edit Full Edit