|
 |
|
 |
 |
Home Forum The Performance Tuning Shop Clutching
|
I can't get this clutch bolt out
started by arcticcatmatt
|
|
|
|
January 26th 2008 at 2:27 PM
|
|
| |
|
arcticcatmatt
Spleen Splitter
arcticcatmatt needs to get out of work.
Updated Yesterday at 1:15 PM
|
12125 Posts 
Group: Moderators
Member Since: November 25th 2001
Location: Berkshire, NY, USA
Current Sled: 96/97 ZRT 600
Miles Last Season: 100
Miles This Season: 462
|
|
|
|
| |
What the heck am I doing wrong? I turn turn turn and it will not come out. I can tighten it, but I cannot remove it. Even if I yank out on it.
97 ZRT 600 motor
|
|
 |
|
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
|
January 26th 2008 at 6:57 PM
|
|
| |
|
|
| |
boy, I wonder if they had a sleeve on them like polaris and the sleeve is froze? no becaue why can you turn the bolt then?
what if you took your cover bolts off? and let the spring of the cover push against it while you turn?
or maybe that will give you something to pry on. if the cover even holds against the bolt?
is that clutch still on a motor?
nothing goes like 3 holes!!
Aaen Performance!!!!
High performance engineering
millennium technologies
brtech hoods
price performance
Got Speed Racing
320-629-4889
|
|
|
|
|
|
|
January 26th 2008 at 9:46 PM
|
|
| |
|
thewayout440
The Fat Kid
|
2796 Posts 
Group: Members
Member Since: June 3rd 2006
Location: chittenango, ny, USA
Current Sled: 2003 prox 600
Miles Last Season: 1000ish
Miles This Season: 1250 ish
|
|
|
|
| |
do you have an impact gun?...
TEAM 50 CAL.
"use what you can, make what you can't"
2 and 4 suck... 3 is the majic number.... ;)(still applies even tho i now own a twin)
2003 prox 600
rumble pack can, vforce 3 reeds, powermadd hand guards, low black windshield, 1.25 kimpex x-force, 96 woodys studs w/ double backers and tall nuts, black c&a adx's, shorty, race snowflap, 6in riser w/ protaper sno-x bars, wps mountain bar and alluminum throttle block, long grips, black xxx mod rods hood
(plenty more to come)
1995 xcr 600 triple ( SOLD )
fox shox, xtra 10 rear, tether, shorty seat, edge tank, custom paint, dg can, low black windshield, 1 in track, pod filters, xeon bulb, custom bars set up, black headlight cover, sno-stuff skis
|
|
|
|
|
|
|
January 26th 2008 at 10:03 PM
|
|
| |
|
|
arcticcatmatt
Spleen Splitter
arcticcatmatt needs to get out of work.
Updated Yesterday at 1:15 PM
|
12125 Posts
Group: Moderators
Member Since: November 25th 2001
Location: Berkshire, NY, USA
Current Sled: 96/97 ZRT 600
Miles Last Season: 100
Miles This Season: 462
|
|
|
|
| |
Madcow- its a junk 97 zrt motor I have I am parting out.
Thewayout440 - Yes I do, but doesn't matter, its just spinning.
The guys on arcticchat are giving advice, I will post up what happens tommorrow.
|
|
|
|
|
|
|
January 27th 2008 at 3:07 AM
|
|
| |
|
wiguy05
Ultra Less Freak :(
wiguy05 is loving the his new 1.6" track!
Updated Friday at 8:59 PM
|
1235 Posts 
Group: Members
Member Since: November 30th 2005
Location: WI, USA
Current Sled: '06 Fusion 600HO
Miles Last Season: 300
Miles This Season: 200
|
|
|
|
| |
Same thing happened on my brothers 99ZR. I took a needle-nose vice grips and locked it on the head VERY tight! Slowly twist and pull out at the same time. Keep trying, it took me a few attempts but I got it out!
Jared
*2006 Fusion 600HO. BMP Pipe Mod, SLP Air Horn, SLP Flo-Rites.
*1986 Polaris Indy 400. Fresh Rebuilt engine. [Parting Out!]
*1989 Polaris Indy 650.[Parting Out!]
*1999 Artic Cat ZR700, Clutched, twin piped, 136x1.5 Ripsaw w/ TracksUSA's [For Sale!]
College: UW-Platteville
|
|
|
|
|
|
|
January 27th 2008 at 3:22 PM
|
|
| |
|
|
arcticcatmatt
Spleen Splitter
arcticcatmatt needs to get out of work.
Updated Yesterday at 1:15 PM
|
12125 Posts
Group: Moderators
Member Since: November 25th 2001
Location: Berkshire, NY, USA
Current Sled: 96/97 ZRT 600
Miles Last Season: 100
Miles This Season: 462
|
|
|
|
| |
Got it. Needle nose vice grips did the trick, just grabed and yanked. Got the clutch off too.. time to sell that now.
Thanks :)
|
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
Current members reading this topic are:
|
 |
|
