|
 |
|
 |
 |
Home Forum General
|
rebuilding a motor for a friend
- 95 xcr
started by polaris91
|
|
|
|
March 31st 2008 at 8:57 PM
[ Modified March 31st 2008 at 9:02 PM
]
|
|
| |
|
polaris91
Got snow?
polaris91 really needs it to snow.
Updated Wednesday at 4:44 PM
|
2473 Posts 
Group: Members
Member Since: March 9th 2006
Location: bridgeport, new york, USA
Current Sled: 1991 indymod/2005 xcsp600
Miles Last Season: 1,985
Miles This Season: no snowyet
|
|
|
|
| |
well me and my dad are gonna be workin on a motor for a friend and i was bored so i decided to start a thread about the build. it has a bad clutch side piston and head so he started the disassembly started pulled the waterjacket and heads no problem but when taking the cylender nuts off two wouldent come off so they had to be cut so those two studs now need to be replaced after that the cylenders came right off we think they well be fine with a hone job the piston is another story its junk theres a big peice missing from the skirt we diddent originaly plan on taring down the bottom end if we diddent have to but after that we deffenetly are going to trying to figure out where the chunk went there was deffenatly some above the piston causing the head to be messed up so is the top of the piston so heres some pics for now i will add more as we go
1991 indy trail mod bored.20over, ported and polished, cluched and geared, chaincase/brakes/jackshaft from 93 xlt, headlight cover, teather, some custom painting, black skid plate, blue running board trim, fox shocks, blue/gray powermadd handguards, 2 in powermadd riser, fly bars/barpad,blue leds(underglow),1 in lug track, teather mount from a 96xcr440,blue guage bulbs, blue c&as, xtra 10 rear, and shorty seat and edge tank.
2005 xcsp 600, chrome windy, stripped decals, 3.5 inch rox riser, powermadd handguards, c&a ultra 3 skis,1.25 camoplast preditor slp can fly bars/barpad xeon headlight bulbs and rsi barhooks
|
|
 |
|
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
|
March 31st 2008 at 9:21 PM
|
|
| |
|
OldCatRider
Advanced Member
|
1635 Posts 
Group: Members
Member Since: August 27th 2006
Location: Groton, NY, USA
|
|
|
|
| |
You might have gotten lucky and it all went out the exhaust.
Just to be sure, use an air hose and blow out the base.
'93 wildcat 700efi w/Comet Pro-4 clutch
'80 pantera 500 FC w/ Comet 108
'90 Wildcat, project in progress
Senior Deacon, Dryden Lodge #472 F.&A.M.
Trail Boss: Dryden to Groton area
www.dcdrifters.net
If I get to doing any better I am going to have to hire someone to help me celebrate.
Harry, I'm, packing your lunch.........
|
|
|
|
|
|
|
March 31st 2008 at 9:28 PM
|
|
| |
|
|
polaris91
Got snow?
polaris91 really needs it to snow.
Updated Wednesday at 4:44 PM
|
2473 Posts
Group: Members
Member Since: March 9th 2006
Location: bridgeport, new york, USA
Current Sled: 1991 indymod/2005 xcsp600
Miles Last Season: 1,985
Miles This Season: no snowyet
|
|
|
|
| |
yea were just gonna take it all apart anyways just to make sure
1991 indy trail mod bored.20over, ported and polished, cluched and geared, chaincase/brakes/jackshaft from 93 xlt, headlight cover, teather, some custom painting, black skid plate, blue running board trim, fox shocks, blue/gray powermadd handguards, 2 in powermadd riser, fly bars/barpad,blue leds(underglow),1 in lug track, teather mount from a 96xcr440,blue guage bulbs, blue c&as, xtra 10 rear, and shorty seat and edge tank.
2005 xcsp 600, chrome windy, stripped decals, 3.5 inch rox riser, powermadd handguards, c&a ultra 3 skis,1.25 camoplast preditor slp can fly bars/barpad xeon headlight bulbs and rsi barhooks
|
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
Current members reading this topic are:
|
 |
|
