Pro-X 600 Triple at Snowmobile Fanatics

HomeForumPolaris

1 Pages

Pro-X 600 Triple - possible summer project started by Viper17

April 9th 2008 at 11:37 AM

Post #1

Viper17
Average Member

552 Posts

Group: Members
Member Since: February 1st 2007
Location: Three Lakes, Wisconsin, USA
Current Sled: 03 SXViper, 03 440 Pro-X

I was pondering summer projects and I was thinking it would be cool to put my xlt engine in a Pro-X 440 chassis. I know it can be done because I saw that 800 triple on here awhile ago. The only problem is finding a chassis. I was thinking about getting a 440 fan and routing the cooling stuff because those chassis seem to be going cheaper. I know it would be more work but I have all summer. Would it be difficult to mount the engine in there?

2003 SXViper
-2 inch track
-Tag bars
-Gravity Worx Cables
-custom Painted Hood
-Upgraded Motor Mounts

2003 440 Pro-X
-Studded
-Walker Evans Clickers

Rating:

Quick Edit
Edit Topic

Site Supporter

Group: Site Supporters

April 9th 2008 at 12:29 PM

Post #2

madcow
Senior Member

5762 Posts

Group: Members
Member Since: March 3rd 2002
Location: Pine City, Mn, USA

a 99 440 edge xcr would be the best one to do it to. you can buy the complete sled for 1500-1800 bucks. sell the engine and stuff for a couple hundred.
the rear skid is a lot different then the trail edge sleds,
any edge body up to 02 is very easy. 03 04 prox took a little more work because of the shape of the bulk head and steering post.

nothing goes like 3 holes!!
Aaen Performance!!!!
High performance engineering
millennium technologies
brtech hoods
price performance

Got Speed Racing
320-629-4889

Rating:

Quick Edit
Full Edit

April 9th 2008 at 12:45 PM

Post #3

Viper17
Average Member

552 Posts

Group: Members
Member Since: February 1st 2007
Location: Three Lakes, Wisconsin, USA
Current Sled: 03 SXViper, 03 440 Pro-X

I was thinking a 01-02 Pro-X

2003 SXViper
-2 inch track
-Tag bars
-Gravity Worx Cables
-custom Painted Hood
-Upgraded Motor Mounts

2003 440 Pro-X
-Studded
-Walker Evans Clickers

Rating:

Quick Edit
Full Edit

April 9th 2008 at 5:28 PM [ Modified April 9th 2008 at 5:29 PM ]

Post #4

madcow
Senior Member

5762 Posts

Group: Members
Member Since: March 3rd 2002
Location: Pine City, Mn, USA

they still might be better than a newer one, because there steering is closer to an early edge design more than a late model prox. there is a little bulk head trimming for the recoil?

you might be able to use the twin motor straps and just make new holes?
if you went with the stock single exhaust it would be a peice of cake. if you went with triple pipes you will have to make them fit.

nothing goes like 3 holes!!
Aaen Performance!!!!
High performance engineering
millennium technologies
brtech hoods
price performance

Got Speed Racing
320-629-4889

Rating:

Quick Edit
Full Edit

April 9th 2008 at 6:44 PM

Post #5

Viper17
Average Member

552 Posts