will a primary clutch from a 1999 700 XC fit on my 2001 XC 700 SP? started by duiker700
	April 15th 2008 at 2:02 PM Post #1
	duiker700 New Member 73 Posts Group: Members Member Since: December 10th 2006 Location: Deep River, Ontario, Canada
	I'm wondering if a primary clutch from a 1999 700 XC fit on my 2001 XC 700 SP. I need to know fast cuz the auction on ebay ends in 20 hours. Thanks a lot Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	April 15th 2008 at 6:06 PM Post #2
	driftpounder Canadian Psycho driftpounder can already hear the BBBBRRRRRAAAAAPPPPP! of the MBRP. Updated Monday at 3:23 PM 1500 Posts Group: Members Member Since: April 26th 2006 Location: Porcupine Plain/Saskatoon, Saskatchewan, Canada Current Sled: 2006 Compfusion 2008-2009 Miles: 502
	Yes it will fit, a P85 has been the same since the early '90's not on the exact year but it will fit. '06 Fusion 700 0 miles just bought it High Flow SLP Air Box Hot Air Elimination Kit MBRP 136/15/1.5 Ripsaw tracks usa kit Rating: 0 Quick Edit Full Edit

	April 15th 2008 at 6:16 PM Post #3
	thewayout440 777 thewayout440 mmmmpow. Updated Last Monday at 7:17 AM 3162 Posts Group: Members Member Since: June 3rd 2006 Location: chittenango, ny, USA Current Sled: 2005 iq r 440 2008-2009 Miles: 1250 ish
	^x2 TEAM 50 CAL. 2005 iqr 440 stock:( prox 440 chassis water xer in the making 600 big block motor other odds and ends 2003 prox 600 ( SOLD ) rumble pack can, vforce 3 reeds, powermadd hand guards, low black windshield, 1.25 kimpex x-force, 96 woodys studs w/ double backers and tall nuts, black c&a adx's, shorty, race snowflap, 6in riser w/ protaper sno-x bars, wps mountain bar and alluminum throttle block, long grips, black xxx mod rods hood (plenty more to come) 1995 xcr 600 triple ( SOLD ) fox shox, xtra 10 rear, tether, shorty seat, edge tank, custom paint, dg can, low black windshield, 1 in track, pod filters, xeon bulb, custom bars set up, black headlight cover, sno-stuff skis The c&a's are like running power steering, you don't need to put any effort for it to turn. -xcr440 Rating: 0 Quick Edit Full Edit

	April 16th 2008 at 8:21 AM Post #4
	dodger WEDGE RIDER 1397 Posts Group: Members Member Since: October 24th 2003 Location: Central, Michigan, USA
	wrong,,,,Domestic engine clutches and Fuji clutches will not interchange....Thus different pullers. The answer to the initial question is yes but they have mislead you somewhat. I've never had a ten But I've had 5 two's GARAGE FULL OF WEDGIES 1998 XC 700 1998 XC 600 1998 XCF 440 1997 SKS 700 2003 Pro X oops thats an "edgie" 1976 tx 340 1972 colt 340 1974 John Deere 400 Rating: 0 Quick Edit Full Edit

	April 16th 2008 at 11:15 AM Post #5
	polaris91 117 racing polaris91 ugh. Updated Tuesday at 8:30 PM 3646 Posts Group: Members Member Since: March 9th 2006 Location: bridgeport, new york, USA Current Sled: 1991 indymod/2005 xcsp600 2008-2009 Miles: 2900 2009-2010 Miles: grass!?
	yes but as said. but there is a difference between the fugi and liberty motor clutches the taper on the crank is different on the fugis but this is from a liberty and yours is a liberty so it will fit. 1990 indy trail bored.20over, ported and polished, cluched and geared, chaincase/brakes/jackshaft from 93 xlt, headlight cover, teather, some custom painting, black skid plate, blue running board trim, fox shocks, blue/gray powermadd handguards, 2 in powermadd riser, fly bars/barpad,blue leds(underglow),1 in lug track, teather mount from a 96xcr440,blue guage bulbs, blue c&as, xtra 10 rear, and edge seat and tank. 2005 xcsp 600,chrome windy,stripped decals,3.5 inch rox riser,white powermadd handguards,white c&a ultra 3 skis 6in shapers,camoplast cobra,slp can,fly bars/barpad,xeon headlight bulbs,rsi barhooks,odi grips,light blue clutch spring,slp vents,black headlight cover,billet wheels,rydefx clicker, Rating: 0 Quick Edit Full Edit

	April 16th 2008 at 2:59 PM Post #6
	98700xc I Can Smell It Now!!!! 680 Posts Group: Members Member Since: January 7th 2005 Location: Roseville, Mi, USA
	And it will have to have the 2000 and up bolt also as the 98 and 99's have a different bolt, in 2000 they changed the bold thus needing the correct puller also when you need to take it off for service or cleaning. http://www.snowmobilefanatics.com/galler...splay.aspx www.snowmobilefanatics.net/98700xc Rating: 0 Quick Edit Full Edit

	April 21st 2008 at 11:32 PM Post #7
	likinit2 Junior Member 151 Posts Group: Members Member Since: April 18th 2004 Location: Scotts, MI, USA
	Quote originally posted by duiker700 I'm wondering if a primary clutch from a 1999 700 XC fit on my 2001 XC 700 SP. I need to know fast cuz the auction on ebay ends in 20 hours. Thanks a lot It will not work because the 2001 engine has a larger bolt securing the clutch that WILL NOT fit through the center of the 97-99 big block clutches. You could put the newer clutch on an older engine though, all the tapers are the same. Rating: 0 Quick Edit Full Edit

	April 26th 2008 at 7:07 AM Post #8
	polaris1man Average Member 738 Posts Group: Members Member Since: December 22nd 2007 Location: Nashwauk, Minnesota, USA Current Sled: Polaris SKS700 2008-2009 Miles: not many
	Original OEm clutch for a '99 XC 700 is 2201887, which is super seeded by 1321928 now. You will need the clutch bolt 7517501 Three-1999 Polaris SKS700's 2000 Polaris SKS700 2000 Polaris Ranger 6x6 2007 Polaris Sportsman 800 EFI X2 2000 Yamaha YZ 250 1996 Yamaha WR250 Rating: 0 Quick Edit Full Edit