 |
Home Forum The Performance Tuning Shop
|
94 ARCTIC CAT PUMA 340 F/C, Runs But Won't Move
- my 94 puma 34o f/c starts, and revs, but doesn't move
started by yamahaguy77
|
|
|
|
May 4th 2008 at 4:06 PM
|
|
| |
|
yamahaguy77
DREAM EATER, SNOW RAPER
|
161 Posts 
Group: Members
Member Since: December 23rd 2006
Location: Newmarket, Ontario, Canada
Current Sled: 2003 Polaris Pro XR 800
Miles Last Season: 1400
Miles This Season: 1000
|
|
|
|
| |
alright, i've fixed my sleds before but on all that i've owned this has never happined.
i have a 1994 Arctic Cat Puma 340 F/c, and i was rideing the piss outta her and i pulled back into my cottage driveway and she just stopped moving, the motor was still running and i could rev it, but... no go,
i've given it some thought, and i've come up with two possible explanations.
1) clutch is not engaging, snapped / unsprung spring ???
2)Seized Bearings in the rod going from the clutch to the brake, that turns the track ???
i'm pretty positive that it's number two, because i put a jack under the ass end, and tried to urn the clutch attached to the rod, and she didn't budge, and i checked, the track was not touching the ground.
Also, the mikuni carb is super tempermental,, pisses me off so much.
Also, i had to buy my neighbour Mr. Berry, a new lock for his gate, because i came flying down the road to get to my cottage, and went to pull the brakes, and i had the lever to the bars and nothing happined.
there is resistance in the brake line, but theres no bite in the pad, or the rotor, need to know where to find replacement of both pad and rotor.
and if it's not too much trouble, my speedometer doesn't work, any ideas on how to fix this..
thanks for you thoughts, answers, input, and help.
Chris
159" track with Mountain Machines extensions
8" billet wheels
tunnel from Vertical Edge chassis with fuel rack
left hand throttle
1/8 inch tapered bars
four inch riser
Ceramic coated SLP Pipe and Silencer
SLP cold air intake with Flow-Rites and Air Horn
V-Force 3 Reeds
Team Roller Secondary clutch.
I ride polaris Because your mom broke down!!!
|
|
 |
|
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
|
May 4th 2008 at 5:25 PM
|
|
| |
|
kylepotaoes
KylePotatoes
|
57 Posts 
Group: Members
Member Since: January 20th 2008
Location: Little Britain, Ontario, Canada
Current Sled: 1984 Yamaha Phazer
|
|
|
|
| |
What kinda condition is the belt in?
If you never crash, your don't go fast enough.
Current Sleds:
1980 Yamaha Enticer 340 (Dosen't run, yet but it will soon)
1981 Yamaha Enticer 250
1984 Yamaha Phazer
1988 Yamaha Bravo
|
|
|
|
|
|
|
May 4th 2008 at 5:48 PM
[ Modified May 4th 2008 at 5:49 PM
]
|
|
| |
|
|
yamahaguy77
DREAM EATER, SNOW RAPER
|
161 Posts
Group: Members
Member Since: December 23rd 2006
Location: Newmarket, Ontario, Canada
Current Sled: 2003 Polaris Pro XR 800
Miles Last Season: 1400
Miles This Season: 1000
|
|
|
|
| |
belts pretty good, i got a divot in the left side wall of the belt from puttin the flipper to the bars from trying to get 'er to move,
picking up a new belt soon
159" track with Mountain Machines extensions
8" billet wheels
tunnel from Vertical Edge chassis with fuel rack
left hand throttle
1/8 inch tapered bars
four inch riser
Ceramic coated SLP Pipe and Silencer
SLP cold air intake with Flow-Rites and Air Horn
V-Force 3 Reeds
Team Roller Secondary clutch.
I ride polaris Because your mom broke down!!!
|
|
|
|
|
|
|
May 4th 2008 at 9:15 PM
[ Modified May 4th 2008 at 9:16 PM
]
|
|
| |
|
Metallica19991
ZRT God
|
547 Posts 
Group: Members
Member Since: December 13th 2007
Location: Not Gonna Tell U, NH, USA
Current Sled: 1995 ZRT 800
Miles Last Season: 0
Miles This Season: 437
|
|
|
|
| |
Yup its ur bearings... My bearings went at the same time my spedometer did.. Go figure... replace the driveshaft and jackshaft bearings! there should be 4. there about $30 each (well thats what i got them for) Its not that hard.. I can walk you through putting the driveshaft and the chaincase side jackshaft bearings... But i dunno how to put the clutch side jackshaft bearing in.
You need to replace the little pin(s) to get your speedometer working... The pins are in each end where the speedometer cable connect to just pull them out.. one or both could be broken
"Scars heal, glory fades
And all we're left with are the memories made
Pain hurts, but only for a minute
Your life is short so go on and live it
'Cause the chicks dig it. "
Chris Cagle
|
|
|
|
|
|
|
May 4th 2008 at 10:18 PM
|
|
| |
|
polaris91
Got snow?
polaris91 got the track.
Updated Wednesday at 2:40 PM
|
2147 Posts 
Group: Members
Member Since: March 9th 2006
Location: bridgeport, new york, USA
Current Sled: 1991 indymod/2005 xcsp600
Miles Last Season: 1,985
Miles This Season: no snowyet
|
|
|
|
| |
yep its the same reason your speedo isnt working you need new driveshaft bearings
1991 indy trail mod bored.20over, ported and polished, cluched and geared, chaincase/brakes/jackshaft from 93 xlt, headlight cover, teather, some custom painting, black skid plate, blue running board trim, fox shocks, blue/gray powermadd handguards, 2 in powermadd riser, fly bars/barpad,blue leds(underglow),1 in lug track, teather mount from a 96xcr440,blue guage bulbs, blue c&as, xtra 10 rear, and shorty seat and edge tank.
2005 xcsp 600, chrome windy, stripped decals, 3.5 inch rox riser, powermadd handguards, c&a ultra 3 skis,1.25 camoplast preditor
|
|
|
|
|
|
|
May 5th 2008 at 5:00 PM
|
|
| |
|
|
yamahaguy77
DREAM EATER, SNOW RAPER
|
161 Posts
Group: Members
Member Since: December 23rd 2006
Location: Newmarket, Ontario, Canada
Current Sled: 2003 Polaris Pro XR 800
Miles Last Season: 1400
Miles This Season: 1000
|
|
|
|
| |
where can i get the bearings ?
159" track with Mountain Machines extensions
8" billet wheels
tunnel from Vertical Edge chassis with fuel rack
left hand throttle
1/8 inch tapered bars
four inch riser
Ceramic coated SLP Pipe and Silencer
SLP cold air intake with Flow-Rites and Air Horn
V-Force 3 Reeds
Team Roller Secondary clutch.
I ride polaris Because your mom broke down!!!
|
|
|
|
|
|
|
May 6th 2008 at 3:09 PM
|
|
| |
|
|
Metallica19991
ZRT God
|
547 Posts
Group: Members
Member Since: December 13th 2007
Location: Not Gonna Tell U, NH, USA
Current Sled: 1995 ZRT 800
Miles Last Season: 0
Miles This Season: 437
|
|
|
|
| |
I got mine from my dealer.. you could either ebay it or get yours from your dealer.
"Scars heal, glory fades
And all we're left with are the memories made
Pain hurts, but only for a minute
Your life is short so go on and live it
'Cause the chicks dig it. "
Chris Cagle
|
|
|
|
|
|
|
May 6th 2008 at 5:45 PM
|
|
| |
| |