|
 |
|
 |
 |
Home Forum Polaris
|
89 indy 500
- cleaned the carbs and now idles wicked high
started by Raptor700rBronson
|
|
|
|
May 15th 2008 at 5:34 PM
|
|
| |
|
Raptor700rBronson
CountryBoy
Raptor700rBronson has to read 2 chapters in the outsiders:(.
Updated Yesterday at 6:15 PM
|
614 Posts 
Group: Members
Member Since: February 28th 2008
Location: Ohio, New York
Current Sled: 1989 polaris 500
|
|
|
|
| |
i took the left carb off, cleaned it and put it back on( had a little trouble with the cable and clip thing) and now it will start and idle but when you hit the throttle a little it idles so high that it starts to move
|
|
 |
|
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
|
May 15th 2008 at 5:50 PM
[ Modified May 15th 2008 at 5:51 PM
]
|
|
| |
|
polaris91
Got snow?
polaris91 is awaiting his new billet wheels.
Updated Sunday at 4:05 PM
|
2816 Posts 
Group: Members
Member Since: March 9th 2006
Location: bridgeport, new york, USA
Current Sled: 1991 indymod/2005 xcsp600
Miles Last Season: 1,985
Miles This Season: no snowyet
|
|
|
|
| |
take the slides back out and make sure they are in correctly and that they are on the right side
1991 indy trail mod bored.20over, ported and polished, cluched and geared, chaincase/brakes/jackshaft from 93 xlt, headlight cover, teather, some custom painting, black skid plate, blue running board trim, fox shocks, blue/gray powermadd handguards, 2 in powermadd riser, fly bars/barpad,blue leds(underglow),1 in lug track, teather mount from a 96xcr440,blue guage bulbs, blue c&as, xtra 10 rear, and edge seat and tank.
2005 xcsp 600, chrome windy, stripped decals, 3.5 inch rox riser, powermadd handguards, c&a ultra 3 skis,1.25 camoplast preditor slp can fly bars/barpad xeon headlight bulbs and rsi barhooks shorty seat odi grips slp can brown clutch spring
|
|
|
|
|
|
|
May 15th 2008 at 7:20 PM
|
|
| |
|
|
Raptor700rBronson
CountryBoy
Raptor700rBronson has to read 2 chapters in the outsiders:(.
Updated Yesterday at 6:15 PM
|
614 Posts
Group: Members
Member Since: February 28th 2008
Location: Ohio, New York
Current Sled: 1989 polaris 500
|
|
|
|
| |
i probably sound like a retard but are the slides the thing that goes on top of the end of the throttle cable so it stays inplace?
|
|
|
|
|
|
|
May 15th 2008 at 7:33 PM
|
|
| |
|
thewayout440
The Fat Kid
|
2800 Posts
Group: Members
Member Since: June 3rd 2006
Location: chittenango, ny, USA
Current Sled: 2003 prox 600
Miles Last Season: 1000ish
Miles This Season: 1250 ish
|
|
|
|
| |
at the ends or each throttle cable are the slides... they unscrew... and expose a spring, needle, and a cylintrical slide.. those are the slides
TEAM 50 CAL.
"use what you can, make what you can't"
2 and 4 suck... 3 is the majic number.... ;)(still applies even tho i now own a twin)
2003 prox 600
rumble pack can, vforce 3 reeds, powermadd hand guards, low black windshield, 1.25 kimpex x-force, 96 woodys studs w/ double backers and tall nuts, black c&a adx's, shorty, race snowflap, 6in riser w/ protaper sno-x bars, wps mountain bar and alluminum throttle block, long grips, black xxx mod rods hood
(plenty more to come)
1995 xcr 600 triple ( SOLD )
fox shox, xtra 10 rear, tether, shorty seat, edge tank, custom paint, dg can, low black windshield, 1 in track, pod filters, xeon bulb, custom bars set up, black headlight cover, sno-stuff skis
|
|
|
|
|
|
|
May 15th 2008 at 8:07 PM
|
|
| |
|
|
Raptor700rBronson
CountryBoy
Raptor700rBronson has to read 2 chapters in the outsiders:(.
Updated Yesterday at 6:15 PM
| | | | |