Edge handwarmers started by TrailRebel
	October 23rd 2008 at 10:34 AM Post #1
	TrailRebel Polaris Crash Test Dummy 125 Posts Group: Members Member Since: December 21st 2006 Location: Germantown/Tripoli, Wisconsin, USA Current Sled: 03 Cross Country Special 2008-2009 Miles: 850
	My 2003 XC SP, I'm looking to put a different set of bars on it...1 1/8" aluminum. As far as handwarmers go, is it true the RSI's will work on all three settings(Low/Medium/High)? I'd like for them to work just as good if not better than OEM. Any input is well appreciated. I like to ride. Even if you have a Doo/Yami/Cat/Poo, so be it. I bought my snowmobile to have fun, not to tell everyone mine is better than yours. My preference...POLARIS, BABY! Willow Region Sportsmans Club-www.willowregionsportsmansclub.com/ Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	October 23rd 2008 at 12:04 PM Post #2
	motodeficient Waiting for more snow 1358 Posts Group: Members Member Since: July 21st 2007 Location: MAINE Current Sled: 04 XC 660 SP 2008-2009 Miles: 800
	Yeah I have also heard the RSI will work with the polaris setup. I will find out when mine arrive! Rating: 0 Quick Edit Full Edit

	October 23rd 2008 at 3:08 PM Post #3
	polaris91 117 racing polaris91 ugh. Updated Tuesday at 8:30 PM 3647 Posts Group: Members Member Since: March 9th 2006 Location: bridgeport, new york, USA Current Sled: 1991 indymod/2005 xcsp600 2008-2009 Miles: 2900 2009-2010 Miles: grass!?
	just so you know if your carefull and peel them off slowley you can reuse the stock warmers you can use grip glue to glue them back on and wrap some tape around them and let them sit overnight in a warm dry area 1990 indy trail bored.20over, ported and polished, cluched and geared, chaincase/brakes/jackshaft from 93 xlt, headlight cover, teather, some custom painting, black skid plate, blue running board trim, fox shocks, blue/gray powermadd handguards, 2 in powermadd riser, fly bars/barpad,blue leds(underglow),1 in lug track, teather mount from a 96xcr440,blue guage bulbs, blue c&as, xtra 10 rear, and edge seat and tank. 2005 xcsp 600,chrome windy,stripped decals,3.5 inch rox riser,white powermadd handguards,white c&a ultra 3 skis 6in shapers,camoplast cobra,slp can,fly bars/barpad,xeon headlight bulbs,rsi barhooks,odi grips,light blue clutch spring,slp vents,black headlight cover,billet wheels,rydefx clicker, Rating: 0 Quick Edit Full Edit

	October 23rd 2008 at 4:24 PM Post #4
	01ves800 Junior Member 288 Posts Group: Members Member Since: October 23rd 2007 Location: Erie, pa, USA Current Sled: 01 xcsp800 ves 2008-2009 Miles: 78
	I am in the same perdiciment you are. I bought new straight bars for my 01 edge and tore both grips. I could have probably been carefuler and got it off but out of 3 sets of bars with 2 heaters each we got 2 good heaters. I just ordered stock heaters for 35 a piece. That is such a hose job its not even funny. Were can you get rsi heaters? And what type of plug do they use or do you use your stock plug? all the ones i have found only give you high and low so i bit the bullet and bought the poo ones. Rating: 0 Quick Edit Full Edit

	October 23rd 2008 at 4:27 PM Post #5
	motodeficient Waiting for more snow 1358 Posts Group: Members Member Since: July 21st 2007 Location: MAINE Current Sled: 04 XC 660 SP 2008-2009 Miles: 800
	http://www.rsiracing.com/product_info.ph...cts_id=207 Rating: 0 Quick Edit Full Edit

	October 25th 2008 at 2:45 PM Post #6
	motodeficient Waiting for more snow 1358 Posts Group: Members Member Since: July 21st 2007 Location: MAINE Current Sled: 04 XC 660 SP 2008-2009 Miles: 800
	Does anyone know which wire is which for installing the RSI warmers on an 04 polaris. The RSI directions say the white wire is hi, blue is low, and red is ground/common. The polaris handwarmers had a blue, a blue/red, and a brown wire. So which wire goes where? Rating: 0 Quick Edit Full Edit