|
 |
|
 |
 |
|
recoil problems!
- please help!!!
started by formula700
|
|
|
|
November 16th 2008 at 1:22 PM
|
|
| |
|
formula700
HORSEPOWER: If it doesn't scare you, you don't have enough!!!
formula700 starting to get the hang of the new call of duty, anyone else play?
Updated Monday at 8:08 PM
|
232 Posts 
Group: Members
Member Since: September 24th 2008
Location: sudbury, ontario, Canada
Current Sled: 1999 formula 3 700
2008-2009 Miles: None
|
|
|
|
| |
i went to pull my sled over and, nothin i pull and it doesent catch anything,, i took it off seems fine, put it on with 2 bolts, checked if it grabed, and it did, so i put the rest of the bolts in , went to pull it over nothing,, im puzzeld,, does it need to be lubed? any ideas? thanks
formula700
1999 formula 3 700:
mbrp can
epi clutch kit
tinted tail light
custom headlight
de badged
slydog ski's
member of the mbrp4life a.k.a sledcrusher fan club!
03 suzuki ltz 400, mostley stock
1998 dodge dakota club cab
full sterio
tinted
3.9 swap to 5.9
air freshioner
black fuzzy dice
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
November 16th 2008 at 3:54 PM
[ Modified November 16th 2008 at 3:56 PM
]
|
|
| |
|
Offshore24
Dismember
|
4604 Posts 
Group: Moderators
Member Since: November 30th 2002
Location: NOYDB, Confusion, Azerbaijan
Current Sled: 05' Gade
2008-2009 Miles: 2999
|
|
|
|
| |
If it's engaging only part of the time, you may be right. Take it apart and lube it. Don't use axle grease. You need the white grease doo sells. It's pretty steep, like $19 a tube. But it's important to use a suitable grease. Maybe there's some other grease that's a good substitute, but I'm not aware of it. You can get a parts diag off a doo dealer website to see what to lube. When you take it apart you should replace the star washer that holds the thing together on the center post. You cut the old one off with clippers and push the new one on. You don't want to marr the center post or the whole thing could come apart and farkle the magneto when the parts rattle around behind the flywheel.
2005 Ski-Doo MXZ Renegade 600 SDI
Save your breath, you'll need it to blow up your date.
|
|
|
|
|
|
November 16th 2008 at 8:03 PM
|
|
| |
|
|
formula700
HORSEPOWER: If it doesn't scare you, you don't have enough!!!
formula700 starting to get the hang of the new call of duty, anyone else play?
Updated Monday at 8:08 PM
|
232 Posts
Group: Members
Member Since: September 24th 2008
Location: sudbury, ontario, Canada
Current Sled: 1999 formula 3 700
2008-2009 Miles: None
|
|
|
|
| |
i cleaned and luved it verry good and still the same thing! grab anything .. anyone??
1999 formula 3 700:
mbrp can
epi clutch kit
tinted tail light
custom headlight
de badged
slydog ski's
member of the mbrp4life a.k.a sledcrusher fan club!
03 suzuki ltz 400, mostley stock
1998 dodge dakota club cab
full sterio
tinted
3.9 swap to 5.9
air freshioner
black fuzzy dice
|
|
|
|
|
|
November 17th 2008 at 5:37 PM
[ Modified November 17th 2008 at 5:37 PM
]
|
|
| |
|
|
Offshore24
Dismember
|
4604 Posts
Group: Moderators
Member Since: November 30th 2002
Location: NOYDB, Confusion, Azerbaijan
Current Sled: 05' Gade
2008-2009 Miles: 2999
|
|
|
|
| |
Did you put it back together correctly? I only say that because when I put mine back together it didn't work properly then I found out the red piece that throws out to the side and catches , can be installed two ways, and one way is wrong. I can't really describe it.
If you look really carefully at this picture, there are two notches in the red piece to the upper left and bottom. Those guide the green piece's peg to force the whole thing to shift out.
In this pic you can see one of those notches in the red piece on the left side. You have to make sure the green pice is oriented so it sits between the red pegs where the distance between the red pegs is the shortest. Otherwise the green pice won't shift the thing out to catch the flywheel pulley.
Of course this assumes yours is the same as mine. Mine is from an '05 600 sdi.
Hope this helps.
2005 Ski-Doo MXZ Renegade 600 SDI
Save your breath, you'll need it to blow up your date.
|
|
|
|
|
|
November 17th 2008 at 5:52 PM
[ Modified November 17th 2008 at 5:54 PM
]
|
|
| |
|
|
formula700
HORSEPOWER: If it doesn't scare you, you don't have enough!!!
formula700 starting to get the hang of the new call of duty, anyone else play?
Updated Monday at 8:08 PM
|
232 Posts
Group: Members
Member Since: September 24th 2008
Location: sudbury, ontario, Canada
Current Sled: 1999 formula 3 700
2008-2009 Miles: None
|
|
|
|
| |
thanks for the help!, i have it catching naw, but it doesent catch till like 2 feet frome the sled, normal? i dont remember how it was before, so i tried tieing the handle closer felt like it was grabing closer cause the handle wwas closer, pulled it over a few times, and its back to almost 2 feet frome the sled.. it might end up staying the way it is
lol
im gonna go and take it of again and take a few pic's to show you
1999 formula 3 700:
mbrp can
epi clutch kit
tinted tail light
custom headlight
de badged
slydog ski's
member of the mbrp4life a.k.a sledcrusher fan club!
03 suzuki ltz 400, mostley stock
1998 dodge dakota club cab
full sterio
tinted
3.9 swap to 5.9
air freshioner
black fuzzy dice
|
|
|
|
|
|
November 17th 2008 at 6:10 PM
[ Modified November 17th 2008 at 6:11 PM
]
|
|
| |
|
|
formula700
HORSEPOWER: If it doesn't scare you, you don't have enough!!!
formula700 starting to get the hang of the new call of duty, anyone else play?
Updated Monday at 8:08 PM
|
232 Posts
Group: Members
Member Since: September 24th 2008
Location: sudbury, ontario, Canada
Current Sled: 1999 formula 3 700
2008-2009 Miles: None
|
|
|
|
| |
sry for the crapy quality, its off my didgital camera
1999 formula 3 700:
mbrp can
epi clutch kit
tinted tail light
custom headlight
de badged
slydog ski's
member of the mbrp4life a.k.a sledcrusher fan club!
03 suzuki ltz 400, mostley stock
1998 dodge dakota club cab
full sterio
tinted
3.9 swap to 5.9
air freshioner
black fuzzy dice
|
|
|
|
|
|
November 17th 2008 at 6:21 PM
|
|
| |
|
|
Offshore24
Dismember
|
4604 Posts
Group: Moderators
Member Since: November 30th 2002
Location: NOYDB, Confusion, Azerbaijan
Current Sled: 05' Gade
2008-2009 Miles: 2999
|
|
|
|
| |
I can't see if there are two pegs on the red part. it appears that the part isn't shifting out early enough. Are there 2 pegs on the red aprt and is the center grey (white) part peg between the two red pegs?
2005 Ski-Doo MXZ Renegade 600 SDI
Save your breath, you'll need it to blow up your date.
|
|
|
|
|
|
November 17th 2008 at 8:13 PM
|
|
| |
|
|
formula700
HORSEPOWER: If it doesn't scare you, you don't have enough!!!
formula700 starting to get the hang of the new call of duty, anyone else play?
Updated Monday at 8:08 PM
|
232 Posts
Group: Members
Member Since: September 24th 2008
Location: sudbury, ontario, Canada
Current Sled: 1999 formula 3 700
2008-2009 Miles: None
|
|
|
|
| |
on the red part, there is only 1 peg for the center whit part to catch it has to go all the way arround befor it grabs
1999 formula 3 700:
mbrp can
epi clutch kit
tinted tail light
custom headlight
de badged
slydog ski's
member of the mbrp4life a.k.a sledcrusher fan club!
03 suzuki ltz 400, mostley stock
1998 dodge dakota club cab
full sterio
tinted
3.9 swap to 5.9
air freshioner
black fuzzy dice
|
|
|
|
|
|
November 18th 2008 at 5:28 PM
|
|
| |
|
|
Offshore24
Dismember
|
4604 Posts
Group: Moderators
Member Since: November 30th 2002
Location: NOYDB, Confusion, Azerbaijan
Current Sled: 05' Gade
2008-2009 Miles: 2999
|
|
|
|
| |
maybe the other peg, if there was one, broke off? I don't have any more suggestions. Good luck.
2005 Ski-Doo MXZ Renegade 600 SDI
Save your breath, you'll need it to blow up your date.
|
|
|
|
|
1 user(s) are reading this topic (0 Members and
1 Guests)
|
 |
|
