|
 |
|
 |
 |
|
ALL DONE!
- well at least until I get more money... :)
started by mx1212
|
|
|
|
December 5th 2008 at 12:15 AM
|
|
| |
|
mx1212
K. Kerb
|
351 Posts 
Group: Members
Member Since: December 17th 2005
Location: Tacoma, WA, USA
Current Sled: 2005 900 Rmk
|
|
|
|
| |
Been working on my sled for a while now puting new bars, raisers, throttle and brake cables, hand warmers, grips, mtn bar, wilwood brake, throttle block, relocated all hand controls, and even painted my windshield black. I just need one more thing... SNOW!!! Next mod on the list will be a diamond s mesh hood, and maybe a boss seat but I need to save up some cash.
Tell me what you think so far!
2005 900RMK 159" TRACK- SLP can, Race bend bars, Pivot Block, 7" Pivot raiser, RSI Mountain Bar, RSI Grips, RSI Hand Warmers, Powermad Throttle Block, Wilwood Brake Kit, Entended Throttle and Brake Lines, Custom Fabbed Controlls, Tether switch
2006 600HO RMK 144" Track- 2" Raiser
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
December 5th 2008 at 6:52 AM
|
|
| |
|
XEdge600
Junior Member
|
246 Posts
Group: Members
Member Since: November 9th 2008
Location: green bay, wisconsin, USA
Current Sled: 2002 Polars Edge X 700
2008-2009 Miles: 990
|
|
|
|
| |
looks pretty tight man!
now make it look one of a kind! strip the hood get it painted.put your own graphics on there
overall very nice! 
2002 Polaris Edge X 700
Slp Can
Slp Boost Bottle
Powermadd 2 inch riser
Blue Neon
|
|
|
|
|
|
December 5th 2008 at 8:45 AM
|
|
| |
|
FUSION900PA
Average Member
|
942 Posts 
Group: Members
Member Since: October 20th 2005
Location: Edinburg, PA, USA
Current Sled: SNOW CHECK 09 D8 SP
2008-2009 Miles: 1100
|
|
|
|
| |
Very nice sled....
"If you ain't first, you're last" Ricky Bobby
|
|
|
|
|
|
December 5th 2008 at 9:22 AM
|
|
| |
|
tdgbigfoot
Certified sledaholic
|
1277 Posts 
Group: Members
Member Since: September 12th 2008
Location: Albany, Vermont, USA
Current Sled: 99 SKS 700, 96 Mach Z 780
2008-2009 Miles: 500
|
|
|
|
| |
Nice handlebar setup! Huge risers 2,
2000 Indy Trail Touring 550, 1999 Indy SKS 700, 1996 Mach Z 780, 1994 Wildcat 700, 1991 Formula Plus, 1990 Safari LX, 1989 Indy 400, 1988 Tundra Skandic, 1987 Citation, 1986 Indy Trail 488, 198? Bravo
1969 Corvette 350
2000 Cheroekee - 4 1/2" lift, & other goodies
|
|
|
|
|
|
December 5th 2008 at 2:30 PM
|
|
| |
|
|
mx1212
K. Kerb
|
351 Posts
Group: Members
Member Since: December 17th 2005
Location: Tacoma, WA, USA
Current Sled: 2005 900 Rmk
|
|
|
|
| |
Quote originally posted by XEdge600
looks pretty tight man!
now make it look one of a kind! strip the hood get it painted.put your own graphics on there
overall very nice!
Yeah man i was thinking about stripping everthing except the RMK stickers. I think it would be awesome to paint it black but im not sure how much it would cost, does anyone know? And im not sure if i want to spend money on paint when I think im prolly just going to get a diamond s mesh one. But im not sure yet
2005 900RMK 159" TRACK- SLP can, Race bend bars, Pivot Block, 7" Pivot raiser, RSI Mountain Bar, RSI Grips, RSI Hand Warmers, Powermad Throttle Block, Wilwood Brake Kit, Entended Throttle and Brake Lines, Custom Fabbed Controlls, Tether switch
2006 600HO RMK 144" Track- 2" Raiser
|
|
|
|
|
|
December 5th 2008 at 3:08 PM
|
|
| |
|
Methuselah
Lover of The Old SF
|
1417 Posts
Group: Members
Member Since: December 13th 2005
Location: Alexandria, MN, USA
Current Sled: 07 MXZ 600H.O. ADRENALIN
2008-2009 Miles: 484
|
|
|
|
| |
Looks really clean. How did you relocate the controls like that?
My sleds, last to first.
07 MXZ 600 H.O. ADRENALINE
02 MXZ 500 ADRENALINE
02 ZR 500 LE
97 Formula S 380f
79 Blizzard 7500
79 Citation 250
89 Kittykat 120
Lowering approaches self esteem since 1997.
Adrenaline, it's like nitros for the body.
I SUPPORT OUR TROOPS!
Alexandria Mn.
|
|
|
|
|
|
December 5th 2008 at 9:49 PM
|
|
| |
|
ProXtreme
Junior Member
|
174 Posts
Group: Members
Member Since: November 5th 2006
Location: Fargo, ND, USA
|
|
|
|
| |
Holy Crap, is that about an 8" riser. Nice Ape Hangers. With that set up, you probably dont need a new seat, you will never be sitting down.
|
|
|
|
|
|
December 6th 2008 at 12:40 AM
|
|
| |
|
will_5
A.T.A.C.
|
752 Posts
Group: Members
Member Since: May 20th 2008
Location: Northwest Alaska, USA
Current Sled: 2003 F7
2008-2009 Miles: 1000
|
|
|
|
| |
Looks pretty sweet! The RSI mountain bar looks good on just about any sled. 
|
|
|
|
|
|
December 6th 2008 at 12:53 AM
[ Modified December 6th 2008 at 12:58 AM
]
|
|
| |
|
|
mx1212
K. Kerb
|
351 Posts
Group: Members
Member Since: December 17th 2005
Location: Tacoma, WA, USA
Current Sled: 2005 900 Rmk
|
|
|
|
| |
Quote originally posted by Methuselah
Looks really clean. How did you relocate the controls like that?
First of all I only relocated the controls because in order to put them back on to the bars I would of had to extend about 30 wires making it less reliable. So instead me and a buddy started brain storming and next thing I knew the controls were attached to the pivot mount on the raiser. I widened the raisers just enough to pinch the controls, then made a few brackets out of a couple pieces of scrap sheet metal using the existing holes that hold the brake together. Because of the relocation I ended up buying that wilwood brake that cost about $110 but overall I think its deffinetly worth it :)
Quote originally posted by ProXtreme
Holy Crap, is that about an 8" riser. Nice Ape Hangers. With that set up, you probably dont need a new seat, you will never be sitting down.
Actually because the 900 has rider select, when the bars are in the 5 or 6 position they are straight up and somewhat uncomfortable while sitting. But when I move them down to the 2 position instead of being extending straight up, they are pushed forward at me causing them to not be as high. It feels fine sitting at that height, but then again I almost never ride sitting down. If I did I wouldnt have gone so high.
Quote originally posted by will_5
Looks pretty sweet! The RSI mountain bar looks good on just about any sled.
Yeah man I really think ill like the stability of the new mountain bar over the stock polaris one
2005 900RMK 159" TRACK- SLP can, Race bend bars, Pivot Block, 7" Pivot raiser, RSI Mountain Bar, RSI Grips, RSI Hand Warmers, Powermad Throttle Block, Wilwood Brake Kit, Entended Throttle and Brake Lines, Custom Fabbed Controlls, Tether switch
2006 600HO RMK 144" Track- 2" Raiser
|
|
|
|
|
|
December 6th 2008 at 7:39 AM
|
|
| |
|
|
| |
Of course I've been watching this all the way through,
but wanted to stay in the back ground with it to let Kyle have his thread.
It's basically the same as what's on my 07, but I went with the 9" risers.
Anyway, I just wanted to coment that you did a really nice job putting this all together.
|
|
|
|
|
|
December 6th 2008 at 2:28 PM
|
|
| |
|
|
XEdge600
Junior Member
|
246 Posts
Group: Members
Member Since: November 9th 2008
Location: green bay, wisconsin, USA
Current Sled: 2002 Polars Edge X 700
2008-2009 Miles: 990
|
|
|
|
| |
Quote originally posted by mx1212
Quote originally posted by XEdge600
looks pretty tight man!
now make it look one of a kind! strip the hood get it painted.put your own graphics on there
overall very nice!
Yeah man i was thinking about stripping everthing except the RMK stickers. I think it would be awesome to paint it black but im not sure how much it would cost, does anyone know? And im not sure if i want to spend money on paint when I think im prolly just going to get a diamond s mesh one. But im not sure yet
well it looks sweet as s h i t stock so i guess you dont really needa
but if you wanna stand out and be the only one.do it its worth the compliments and stuff.cant be taht much money can it? anyone know?
and what you mean by "diamond s mesh one"/?
2002 Polaris Edge X 700
Slp Can
Slp Boost Bottle
Powermadd 2 inch riser
Blue Neon
|
|
|
|
|
|
December 6th 2008 at 4:06 PM
|
|
| |
|
|
mx1212
K. Kerb
|
351 Posts
Group: Members
Member Since: December 17th 2005
Location: Tacoma, WA, USA
Current Sled: 2005 900 Rmk
|
|
|
|
| |
Quote originally posted by XEdge600
Quote originally posted by mx1212
Quote originally posted by XEdge600
looks pretty tight man!
now make it look one of a kind! strip the hood get it painted.put your own graphics on there
overall very nice!
Yeah man i was thinking about stripping everthing except the RMK stickers. I think it would be awesome to paint it black but im not sure how much it would cost, does anyone know? And im not sure if i want to spend money on paint when I think im prolly just going to get a diamond s mesh one. But im not sure yet
well it looks sweet as s h i t stock so i guess you dont really needa
but if you wanna stand out and be the only one.do it its worth the compliments and stuff.cant be taht much money can it? anyone know?
and what you mean by "diamond s mesh one"/?
A diamond s mesh hood is just an aftermarket hood
2005 900RMK 159" TRACK- SLP can, Race bend bars, Pivot Block, 7" Pivot raiser, RSI Mountain Bar, RSI Grips, RSI Hand Warmers, Powermad Throttle Block, Wilwood Brake Kit, Entended Throttle and Brake Lines, Custom Fabbed Controlls, Tether switch
2006 600HO RMK 144" Track- 2" Raiser
|
|
|
|
|
|
December 6th 2008 at 4:07 PM
|
|
| |
|
440_jag
450 horse ditch bannger
|
1488 Posts
Group: Members
Member Since: July 30th 2007
Location: Galesville, wisconsin, USA
Current Sled: 2002 zr 500 cce
2008-2009 Miles: 500
|
|
|
|
| |
Looks good dude. What are your other plans for it?
2002 Zr 500 CCE
D&D pipe ported polished y 6 inch riser Acerbis Handguards Chrome winshield Pro-glider Rack Rsi pad Ripped graphics Fox snow pro shocks clickers
|
|
|
|
|
|
December 6th 2008 at 4:08 PM
[ Modified December 6th 2008 at 4:11 PM
]
|
|
| |
|
|
mx1212
K. Kerb
|
351 Posts
Group: Members
Member Since: December 17th 2005
Location: Tacoma, WA, USA
Current Sled: 2005 900 Rmk
|
|
|
|
| |
Quote originally posted by Student Driver
Of course I've been watching this all the way through,
but wanted to stay in the back ground with it to let Kyle have his thread.
It's basically the same as what's on my 07, but I went with the 9" risers.
Anyway, I just wanted to coment that you did a really nice job putting this all together.
Thanks alot for all the help along the way, all I did was assemble it all lol. But im pretty sure mine are 8" now anyways with that pivot so im not far off. :)
Quote originally posted by 440_jag
Looks good dude. What are your other plans for it?
Honestly im not real sure about my next plans for mods other than either a diamond s mesh hood or a boss seat. Anyone else have other ideas? My dad just did the slp air box kit on his, im going to see how it performs before I buy one of my own. Post up some things you can think i should do!!!
2005 900RMK 159" TRACK- SLP can, Race bend bars, Pivot Block, 7" Pivot raiser, RSI Mountain Bar, RSI Grips, RSI Hand Warmers, Powermad Throttle Block, Wilwood Brake Kit, Entended Throttle and Brake Lines, Custom Fabbed Controlls, Tether switch
2006 600HO RMK 144" Track- 2" Raiser
|
|
|
|
|
|
December 6th 2008 at 11:27 PM
|
|
| |
|
|
mx1212
K. Kerb
|
351 Posts
Group: Members
Member Since: December 17th 2005
Location: Tacoma, WA, USA
Current Sled: 2005 900 Rmk
|
|
|
|
| |
Quote originally posted by FUSION900PA
Very nice sled....
Thanks dude. Ive put a lot of work into it for the past month or so thats for sure
2005 900RMK 159" TRACK- SLP can, Race bend bars, Pivot Block, 7" Pivot raiser, RSI Mountain Bar, RSI Grips, RSI Hand Warmers, Powermad Throttle Block, Wilwood Brake Kit, Entended Throttle and Brake Lines, Custom Fabbed Controlls, Tether switch
2006 600HO RMK 144" Track- 2" Raiser
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
|
 |
|
