|
 |
|
 |
 |
You cannot reply to this topic. This topic has been locked!
|
Very disappointed with polaris' service
- Called them today to get a price
started by BRP-4-LIFE
|
|
|
|
December 16th 2008 at 7:08 PM
|
|
| |
|
|
| |
This post is considered "no good" by the community with a rating of -4. View it anyways?
Quote originally posted by Polaris-Man
Hmm, the engine in my truck blew and it's gonna cost me an arm and a leg to fix. I should phone Ford and tell them I hate their F150 and see if I can get an engine cheaper that way.
I have a feeling it's not gonna work out though.
I just told them I was upset that the a-arm broke without beating on it. I wasn't hoping to make them make it cheaper, I was just hoping the manufacturer would sell it cheaper, just longer to get.
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
December 16th 2008 at 7:10 PM
|
|
| |
|
powdermadd440
guzzlin' gas and haulin ass
powdermadd440 wonders how long it will be before snowmobiles need to be inspected in Maine.
Updated Tuesday at 6:33 PM
|
2695 Posts 
Group: Members
Member Since: October 15th 2005
Location: Fairfield, ME, USA
Current Sled: 2001 edge x 600
2008-2009 Miles: 779
|
|
|
|
| |
Quote originally posted by Polaris-Man
Hmm, the engine in my truck blew and it's gonna cost me an arm and a leg to fix. I should phone Ford and tell them I hate their F150 and see if I can get an engine cheaper that way.
I have a feeling it's not gonna work out though.
Well I hope you don't mind buying a used motor for cheap even if you don't know if it will fit in the truck? Want me to measure my motor to see if one off my GMC with fit in the ford?
2001 edge x 600, Vforce 3 reeds, SLP boost bottle, SLP can, yellow primary spring, 4" RSI risers, RSI backcountry bars, RSI gel wraps, Acerbis hand guards, yellow skidplate, Simmons skis, 1 3/8" camoplast track, RSI ice scratchers
|
|
|
|
|
|
December 16th 2008 at 7:14 PM
|
|
| |
|
BSMILITIA
New Member
|
57 Posts 
Group: Members
Member Since: February 19th 2007
Location: Lake George, NY, USA
Current Sled: 2001 xcf 440 sp
2008-2009 Miles: 500
|
|
|
|
| |
Quote originally posted by BRP-4-LIFE
So today, I called Polaris directly to see what they would charge for the lower a-arm for my sled. So I figure, can't hurt to find somewhere cheaper than $128.98 ( through carls cycle ). Well, they priced me something like $151. I said, well, I am very upset with your product. I got the response of "Please contact your local dealership, maybe they can do something about it, thank you". And hung up. Poor service. I doubt the Polaris company representatives are normally like this, but this guy was just an a-hole. So, I looked up "Polaris snowmobile" with the hopes of finding a forum. I didn't find a forum, but I did find a place I've never heard of; Babbitts Sports Center. BEST NEW PARTS PLACE EVER! Lowest prices I've seen yet. $102 for a brand new lower a-arm plus shipping. Although I'm going to keep looking, that was outstanding that I saw that.
Does anyone know of any other place besides als snowmobile that sells used snowmobile parts?
your my hero
B.S. MILITIA member
2004 sno pro 440 SOLD!!!
2001 xcf 440sp trail sled
1991 yamaha venture480 XL 118 and counting stickers pit sled SOLD!!!
Looking for a 440 again?
|
|
|
|
|
|
December 16th 2008 at 7:14 PM
|
|
| |
|
|
| |
This post is considered "no good" by the community with a rating of -3. View it anyways?
I'm not trying to put a damn rev a-arm on the thing. And actually, if I had a truck, and blew the motor, and had to pay cash for a new engine, I would go used.
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
|
|
|
|
December 16th 2008 at 7:15 PM
[ Modified December 16th 2008 at 7:16 PM
]
|
|
| |
|
milleniumman
If he doesnt keep it he is going to leave
|
316 Posts 
Group: Members
Member Since: December 6th 2006
Location: Ft Nelson, British Columbia, Canada
Current Sled: 2000 Summit 700
|
|
|
|
| |
Quote originally posted by powdermadd440
Quote originally posted by Polaris-Man
Hmm, the engine in my truck blew and it's gonna cost me an arm and a leg to fix. I should phone Ford and tell them I hate their F150 and see if I can get an engine cheaper that way.
I have a feeling it's not gonna work out though.
Well I hope you don't mind buying a used motor for cheap even if you don't know if it will fit in the truck? Want me to measure my motor to see if one off my GMC with fit in the ford?
With BRP's thinking you should buy it because its cheap. Dont matter if it will fit or not. 
Quote originally posted by BRP-4-LIFE
Before I continue, if I don't keep this sled for the whole season, I promise to never sign on to Snowmobile Fanatics again.
|
|
|
|
|
|
December 16th 2008 at 7:16 PM
|
|
| |
|
|
| |
This post is considered "no good" by the community with a rating of -3. View it anyways?
I haven't ordered the a-arm, thats why I'm asking if it will fit!
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
|
|
|
|
December 16th 2008 at 7:16 PM
|
|
| |
|
motodeficient
Waiting for more snow
|
1358 Posts 
Group: Members
Member Since: July 21st 2007
Location: MAINE
Current Sled: 04 XC 660 SP
2008-2009 Miles: 800
|
|
|
|
| |
Don't they teach anything about economics yet in middle school?
|
|
|
|
|
|
December 16th 2008 at 7:16 PM
|
|
| |
|
|
| |
This post is considered "no good" by the community with a rating of -4. View it anyways?
Quote originally posted by motodeficient
Don't they teach anything about economics yet in middle school?
1. I'm in high school
2. No
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
|
|
|
|
December 16th 2008 at 7:17 PM
|
|
| |
|
|
milleniumman
If he doesnt keep it he is going to leave
|
316 Posts
Group: Members
Member Since: December 6th 2006
Location: Ft Nelson, British Columbia, Canada
Current Sled: 2000 Summit 700
|
|
|
|
| |
Quote originally posted by BRP-4-LIFE
I'm not trying to put a damn rev a-arm on the thing. And actually, if I had a truck, and blew the motor, and had to pay cash for a new engine, I would go used.
Thats a good idea you should trade your sled for a truck. Than you could never have a reason to sign in here again.
Quote originally posted by BRP-4-LIFE
Before I continue, if I don't keep this sled for the whole season, I promise to never sign on to Snowmobile Fanatics again.
|
|
|
|
|
|
December 16th 2008 at 7:18 PM
|
|
| |
|
erick
Alternate Realities
erick pretty much excited that it's Friday, though there are no plans for the weekend yet!
Updated Friday at 11:45 AM
|
11495 Posts 
Group: Administrators
Member Since: April 10th 2001
Location: Strathcona, MN, USA
Current Sled: IQr 800 & RMK 800
2008-2009 Miles: 800
|
|
|
|
| |
Why don't you go measure it yourself. You have the sled your going to put it on.
Breaking free from the thoughts in my mind
|
|
|
|
|
|
December 16th 2008 at 7:20 PM
|
|
| |
|
killerbee52j
The X package
|
1753 Posts
Group: Members
Member Since: March 12th 2007
Location: Hamburg, ny, USA
Current Sled: 08 mxzx 600 sdi
2008-2009 Miles: 1800
|
|
|
|
| |
Quote originally posted by BRP-4-LIFE
I'm not trying to put a damn rev a-arm on the thing. And actually, if I had a truck, and blew the motor, and had to pay cash for a new engine, I would go used.
I wouldent buy them things used.My buddie bought a tranny and he went through 3 of them in a month.And they were all used.
"ride it like you stole it"
"the 6 pack is under the keg"
|
|
|
|
|
|
December 16th 2008 at 7:20 PM
|
|
| |
|
|
| |
This post is considered "no good" by the community with a rating of -6. View it anyways?
Quote originally posted by erick
Why don't you go measure it yourself. You have the sled your going to put it on.
I DONT HAVE THE A-ARM AND DONT WANT TO SPEND THE $81 TO HAVE IT SHIPPED TO MY DOOR. I have my 2005 Fusion, but I want to see if the 06' Fusion one will work, that's why I asked for someone with a 2006 fusion to measure theres.
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
|
|
|
|
December 16th 2008 at 7:27 PM
|
|
| |
|
SnowMan110
Strange
|
1298 Posts
Group: Members
Member Since: December 12th 2003
Location: Lakeville, Minnesota, USA
Current Sled: 2000 Arctic-Cat ZR500
|
|
|
|
| |
BRP they hung up on you because you are a child and they don't cater to children. They cater to sportsmen with money.
Epic.
|
|
|
|
|
|
December 16th 2008 at 7:32 PM
[ Modified December 16th 2008 at 7:33 PM
]
|
|
| |
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Over 3 hours ago
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
Quote originally posted by killerbee52j
Quote originally posted by BRP-4-LIFE
I'm not trying to put a damn rev a-arm on the thing. And actually, if I had a truck, and blew the motor, and had to pay cash for a new engine, I would go used.
My buddie bought a tranny and he went through 3 of them in a month.And they were all used.
Make sure stuff like that has a warranty
Quote originally posted by BRP-4-LIFE
Quote originally posted by erick
Why don't you go measure it yourself. You have the sled your going to put it on.
I DONT HAVE THE A-ARM AND DONT WANT TO SPEND THE $81 TO HAVE IT SHIPPED TO MY DOOR. I have my 2005 Fusion, but I want to see if the 06' Fusion one will work, that's why I asked for someone with a 2006 fusion to measure theres.
I could since there is one next door but I don't like you at all so I will stay in the house where it is warm.
If it was anyone else I would do it in a heart beat. Sorry man I dislike liers.
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
December 16th 2008 at 7:33 PM
|
|
| |
|
MX86
Powder Rider
|
1640 Posts
Group: Members
Member Since: March 1st 2007
Location: Nashwauk, Minnesota, USA
Current Sled: 1999 polaris 700 SKS mod
2008-2009 Miles: not enough
|
|
|
|
| |
Okay ladies and Gents, Time for another MX rant!
1.) i have read like 6 ****ing times in this thread from BRP-a-Douche about how this one place is cheaper then POO. guess what? IT'S 50 ****ING BUCKS! but it's a USED part compared to a NEW one. wow... for 50 bucks i would buy the new one....
2.) you bought the fusion USED. why the **** would Poo care bout you? you didn't buy the sled from them.
3.) as a fellow Customer Service rep. i deal with well over 500 PEOPLE PER DAY. and if some ****ing 15 y/o is telling me that they hate my product, i would say sorry you feel that way. and i would hang up too. cause guess what? I HAVE BETTER THINGS TO DO, then listen to you bitch. i DIDN'T put the damn sled together. and neither did HE.
4.) someone of such high internet expertise as yourself should be able to FIND a god damn lower A arm. you don't need to bitch about it.
5.) if you don't like the Poo, SELL THE FUSION. (if you havn't already noticed... WE DON'T LIKE YOU, unfortunatly tho, we can't sell you or trade you for a different douchebag.)
6.) Daddy will be paying for it anyways.. so what the **** does it matter to you?
i could go on all day, but i've wasted enough of my valuable time.
2006 Yamaha YZ250
KYB SSS Suspension w/ Race Tech G2 gold Valve, ASV F3 levers, Tag Metals Triple clamp w/Pro Taper Bars, IMS Pro Series Pegs, Motion Pro Twist Throttle Assembly, VF3 Reeds
Thanks to my newest 09 Sponsors:
Gravity Worx Racing
Duner Central
|
|
|
|
|
|
December 16th 2008 at 7:34 PM
|
|
| |
|
|
xcr440
Sundowners Trail Coordinator
xcr440 icefish's because having feeling in your fingertips is overrated.
Updated Over 3 hours ago
|
12582 Posts
Group: Members
Member Since: February 1st 2003
Location: St.Germain/Edgerton, Wisconsin, USA
Current Sled: 03prox700/97xcr440
2008-2009 Miles: 610
|
|
|
|
| |
Quote originally posted by BRP-4-LIFE
Quote originally posted by motodeficient
Don't they teach anything about economics yet in middle school?
1. I'm in high school
2. No
It shows. 
a good beer drinker isnt a picky beer drinker
Loggers.... Working their ass off so you can wipe yours!
"Steep ground is when your cutting a notch and notice a mountain goat looking at you like you are crazy." - Hexan
woodbooga: (WOOD-boog-ah), n. regional dialect, common to areas of New Hampshire and Maine including the towns of Ossipee, Alton, Farmington, Acton, and Lebanon; one who attempts to obtain free firewood to fuel woodburning appliances in an effort to mitigate expenses related to home heating with fossil fuels. Frequently used as a term of derision by non-woodburners who mock the presence of loose bark and other wood waste in the beds of their pickup trucks.
2003 Pro x 700 almond/blue,10-66 black/red team 719 T-flow, 440 mains
1997 xcr440 my clutch kit, 380 mains,T-flow
|
|
|
|
|
|
December 16th 2008 at 7:40 PM
|
|
| |
|
|
| |
Quote originally posted by MX86
Okay ladies and Gents, Time for another MX rant!
1.) i have read like 6 ****ing times in this thread from BRP-a-Douche about how this one place is cheaper then POO. guess what? IT'S 50 ****ING BUCKS! but it's a USED part compared to a NEW one. wow... for 50 bucks i would buy the new one....
2.) you bought the fusion USED. why the **** would Poo care bout you? you didn't buy the sled from them.
3.) as a fellow Customer Service rep. i deal with well over 500 PEOPLE PER DAY. and if some ****ing 15 y/o is telling me that they hate my product, i would say sorry you feel that way. and i would hang up too. cause guess what? I HAVE BETTER THINGS TO DO, then listen to you bitch. i DIDN'T put the damn sled together. and neither did HE.
4.) someone of such high internet expertise as yourself should be able to FIND a god damn lower A arm. you don't need to bitch about it.
5.) if you don't like the Poo, SELL THE FUSION. (if you havn't already noticed... WE DON'T LIKE YOU, unfortunatly tho, we can't sell you or trade you for a different douchebag.)
6.) Daddy will be paying for it anyways.. so what the **** does it matter to you?
i could go on all day, but i've wasted enough of my valuable time.
If you read, I didn't mean to write used.
http://www.babbittsonline.com/pages/part...laris.aspx If you go here, and go to an 05' Fusion 900, read, it's $102, brand new.
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
|
|
|
|
December 16th 2008 at 7:42 PM
|
|
| |
|
|
MX86
Powder Rider
|
1640 Posts
Group: Members
Member Since: March 1st 2007
Location: Nashwauk, Minnesota, USA
Current Sled: 1999 polaris 700 SKS mod
2008-2009 Miles: not enough
|
|
|
|
| |
hrm.. how can you mean to write USED. but wrote NEW almost 6 times?
then you link me to a NEW a-arm? ****ing A kid. get your own ****ing facts straight!
2006 Yamaha YZ250
KYB SSS Suspension w/ Race Tech G2 gold Valve, ASV F3 levers, Tag Metals Triple clamp w/Pro Taper Bars, IMS Pro Series Pegs, Motion Pro Twist Throttle Assembly, VF3 Reeds
Thanks to my newest 09 Sponsors:
Gravity Worx Racing
Duner Central
|
|
|
|
|
|
December 16th 2008 at 7:42 PM
|
|
| |
|
crashed1prox
Demon
|
114 Posts
Group: Members
Member Since: December 9th 2006
Location: Hudsonville, MI, USA
Current Sled: 04 550 prox 08 Shift
2008-2009 Miles: 1440
|
|
|
|
| |
"Sean, I hate you, don't post here" 
|
|
|
|
|
|
December 16th 2008 at 7:44 PM
|
|
| |
|
|
| |
Quote originally posted by MX86
hrm.. how can you mean to write USED. but wrote NEW almost 6 times?
then you link me to a NEW a-arm? ****ing A kid. get your own ****ing facts straight!
I ACCIDENTALLY TYPED USED! Jesus man. Calm down.
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
|
|
|
|
December 16th 2008 at 7:46 PM
|
|
| |
|
sledneck1978
HAIL CHASER
|
2143 Posts
Group: Members
Member Since: August 9th 2007
Location: Andover, MN
2008-2009 Miles: 875
|
|
|
|
| |
Quote originally posted by BRP-4-LIFE
Quote originally posted by erick
Why don't you go measure it yourself. You have the sled your going to put it on.
I DONT HAVE THE A-ARM AND DONT WANT TO SPEND THE $81 TO HAVE IT SHIPPED TO MY DOOR. I have my 2005 Fusion, but I want to see if the 06' Fusion one will work, that's why I asked for someone with a 2006 fusion to measure theres.
How about use that handicapped brain of yours and go to polaris' web site and see if the part #'s on the 05' match the 06'. If I had an 06' in my garage I wouldn't get off my ass for you to save my life by the way.
"You miss 100% of the shots you don't take" (Wayne Gretzky)
"Not everyone gets off to a great start, but you have to start to be great" (Zig Zigler)
|
|
|
|
|
|
December 16th 2008 at 7:47 PM
|
|
| |
|
|
killerbee52j
The X package
|
1753 Posts
Group: Members
Member Since: March 12th 2007
Location: Hamburg, ny, USA
Current Sled: 08 mxzx 600 sdi
2008-2009 Miles: 1800
|
|
|
|
| |
My buddie had a warrenty for all of them.
Quote originally posted by xcr440
Quote originally posted by killerbee52j
Quote originally posted by BRP-4-LIFE
I'm not trying to put a damn rev a-arm on the thing. And actually, if I had a truck, and blew the motor, and had to pay cash for a new engine, I would go used.
My buddie bought a tranny and he went through 3 of them in a month.And they were all used.
Make sure stuff like that has a warranty
Quote originally posted by BRP-4-LIFE
Quote originally posted by erick
Why don't you go measure it yourself. You have the sled your going to put it on.
I DONT HAVE THE A-ARM AND DONT WANT TO SPEND THE $81 TO HAVE IT SHIPPED TO MY DOOR. I have my 2005 Fusion, but I want to see if the 06' Fusion one will work, that's why I asked for someone with a 2006 fusion to measure theres.
I could since there is one next door but I don't like you at all so I will stay in the house where it is warm.
If it was anyone else I would do it in a heart beat. Sorry man I dislike liers.
"ride it like you stole it"
"the 6 pack is under the keg"
|
|
|
|
|
|
December 16th 2008 at 7:47 PM
[ Modified December 16th 2008 at 7:49 PM
]
|
|
| |
|
03Pro-X700
Senior Member
03Pro-X700 wants to get rid of my cdi, tach, wiring harness, and old cover. PM if interested.
Updated Last Sunday at 11:26 PM
|
2414 Posts
Group: Members
Member Since: December 13th 2003
Location: Wisconsin, USA
Current Sled: 2003 Pro-X 700 144"
2008-2009 Miles: 860
|
|
|
|
| |
Can this please just end any time soon? I I've been a member here for quite a while now and i am getting sick of seeing the same stuff almost every night. I have honestly been contemplating leaving this site until this childish crap ends. I come on here to meet some new people, talk about sleds, and share what knowledge i have, all while having fun, but whats going on here is starting to get out of control.
2003 pro-x 700;
TracksUSA 144" tip-up rail extensions
1.25 camoplast predator /120 1.40' extreme max SS studs
VanAmburg tunnel extension
SLP Powder-Pro skis, Powder-Coated suspension
Holtzman tempaflow-420 main jets
10-64g weights w/ round almond spring
24/42 gearing, gutted airbox, PERC, torque arm
|
|
|
|
|
|
December 16th 2008 at 7:48 PM
|
|
| |
|
|
sledneck1978
HAIL CHASER
|
2143 Posts
Group: Members
Member Since: August 9th 2007
Location: Andover, MN
2008-2009 Miles: 875
|
|
|
|
| |
Quote originally posted by 03Pro-X700
Can this please just end any time soon? I I've been a member here for quite a while now and i am getting sick of seeing the same stuff almost every night. I have honestly been contemplating leaving this sight until this childish crap ends. I come on here to meet some new people, talk about sleds, and share what knowledge i have, all while having fun, but whats going on here is starting to get out of control.
Agreed....BAN SEAN!!!!!!!!!!!!!!!!!!!!!!!!!
"You miss 100% of the shots you don't take" (Wayne Gretzky)
"Not everyone gets off to a great start, but you have to start to be great" (Zig Zigler)
|
|
|
|
|
|
December 16th 2008 at 7:51 PM
|
|
| |
|
|
| |
Quote originally posted by sledneck1978
Quote originally posted by BRP-4-LIFE
Quote originally posted by erick
Why don't you go measure it yourself. You have the sled your going to put it on.
I DONT HAVE THE A-ARM AND DONT WANT TO SPEND THE $81 TO HAVE IT SHIPPED TO MY DOOR. I have my 2005 Fusion, but I want to see if the 06' Fusion one will work, that's why I asked for someone with a 2006 fusion to measure theres.
How about use that handicapped brain of yours and go to polaris' web site and see if the part #'s on the 05' match the 06'. If I had an 06' in my garage I wouldn't get off my ass for you to save my life by the way.
If the 05 and 06 had a different thickness even, the part number would be different. If they have the same measurements, it will work just fine.
2005 Fusion 900cfi
Dynoport Can
SLP Torque Arm
1" predator track
--------
Dads:
03' RX-1er
Custom Graphics
4th wheel + Custom wheel kit
--------
Moms:
2000 SXr 600 Sleeper ( 700 triple big bore with cut 600 heads )
Stock elsewise
|
|
|
|
|
0 user(s) are reading this topic (0 Members and
0 Guests)
|
 |
|
