|
 |
|
 |
 |
|
98 xc 700 PART OUT - Southern MN
- Parting the entire sled including engine
started by westman995
|
|
|
|
December 28th 2008 at 1:39 PM
[ Modified December 28th 2008 at 1:43 PM
]
|
|
| |
|
westman995
Advanced Member
|
1927 Posts 
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Parting out a 1998 Polaris xc 700. Everything is being sold minus a few parts that im keeping or are damaged which include: The hood, seat, track, windshield, and gauge pod. Those are the only ones i can think of right now, i think everything else is good to go.
Please PM me with parts requests, i can get pics, right now the sled is still together but will be torn down as soon as something sells off it. The engine has 140+ psi per hole. Its all stock except for the SPI pistons in it.
CDI
xtra 10 suspension
Front fox shocks
Trailing Arms
Cylinders
Head
Crank
Crank case halves
Water pump - For newer sleds, different cooling style
Oil and coolant tanks - For both 98 xc and the newer gen2s and mybe edge
Chain case
Chain
Gears
39mm kehein flatslide carbs
Stock reeds
Polaris plastic skis
Secondary clutch
Primary clutch - needs new spring
Exhaust pipe
Can
Nose cone
Front and rear bumpers
And anything else you can think of.. PM me and ill let you know. Make me an offer or ill give you a price and prolly be or best offer on it too. Im in St. James, MN 56081. Paypal or Postal Money Order and shipping is fine. Or cash only on pick up. All parts are sold AS-IS, no refunds. I will describe any and all parts the best i can, and i will gladly take any pics of any part you would like to see. Thanks
|
|
 |
|
|
|
|
|
| |
Site Supporter
Group: Site Supporters
|
|
| |
|
|
|
|
|
|
December 28th 2008 at 6:01 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
The sled is being tore apart right now. It has 2742 miles on it.. Let me know if you need anything. I think the parts for this sled will go quick.
|
|
|
|
|
|
December 28th 2008 at 6:57 PM
|
|
| |
|
93polarisxlt
Junior Member
|
162 Posts 
Group: Members
Member Since: February 20th 2008
Location: Chippewa Falls, wi
Current Sled: 93 XLT
2008-2009 Miles: 400
|
|
|
|
| |
|
|
|
|
|
|
December 28th 2008 at 7:03 PM
|
|
| |
|
Pance
Cummins Fanatic
|
3007 Posts 
Group: Members
Member Since: February 19th 2006
Location: Eagle Bend, MN, USA
Current Sled: 1998 XC 700
2008-2009 Miles: 150
|
|
|
|
| |
Is this a reverse chaincase?
1999 Saab 9-3 5dr 2.0T 5spd with a long list of mods planned...
1998 Polaris XC 700 reverse, 96 studs... still stock...
2008 Polaris Sportsman 500 EFI winshield, Tool Box, Winch and Aluminum wheels...
1995 dodge ram 2500 cummins turbo diesel, 335000 miles.
For Sale!
-1954 ford f 100 w/ a 383 stroker, turbo 400 tranny, camaro front clip
For more info on either of these PM me...
SUPPORT OUR TROOPS
I am pro-life, abortion is murder.
God made Adam and Eve not Adam and Steve!
I can only pray that Obama finds the lord.
|
|
|
|
|
|
December 28th 2008 at 7:10 PM
|
|
| |
|
thewayout440
777
thewayout440 mmmmpow.
Updated Last Monday at 7:17 AM
|
3162 Posts
Group: Members
Member Since: June 3rd 2006
Location: chittenango, ny, USA
Current Sled: 2005 iq r 440
2008-2009 Miles: 1250 ish
|
|
|
|
| |
how much for motor carbs, all electrical, and primary clutch? pm me
TEAM 50 CAL.
2005 iqr 440 stock:(
prox 440 chassis water xer in the making 600 big block motor other odds and ends
2003 prox 600 ( SOLD )
rumble pack can, vforce 3 reeds, powermadd hand guards, low black windshield, 1.25 kimpex x-force, 96 woodys studs w/ double backers and tall nuts, black c&a adx's, shorty, race snowflap, 6in riser w/ protaper sno-x bars, wps mountain bar and alluminum throttle block, long grips, black xxx mod rods hood
(plenty more to come)
1995 xcr 600 triple ( SOLD )
fox shox, xtra 10 rear, tether, shorty seat, edge tank, custom paint, dg can, low black windshield, 1 in track, pod filters, xeon bulb, custom bars set up, black headlight cover, sno-stuff skis
The c&a's are like running power steering, you don't need to put any effort for it to turn.
-xcr440
|
|
|
|
|
|
December 28th 2008 at 7:39 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
|
|
|
|
|
|
December 28th 2008 at 10:34 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Pics
Speedo - 2742 miles on this sled
Fox shocks
Bumper and nose cone
Engine
Will be getting more pics up soon. The sled is almost completely stripped down. Lets get some real, and serious offers on this stuff. I have had tons of emails but only a few responses back so far. If you need pics of something let me know ill get them quicker.
|
|
|
|
|
|
December 29th 2008 at 1:35 AM
|
|
| |
xcman
New Member
|
75 Posts 
Group: Members
Member Since: September 17th 2004
Location: Port Huron, MI, USA
Current Sled: 2000 XC 700
2008-2009 Miles: 125
|
|
|
|
| |
are those the 220 cylinders? If so how much? Thanks
Just gas it
|
|
|
|
|
|
December 29th 2008 at 2:18 AM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Quote originally posted by xcman
are those the 220 cylinders? If so how much? Thanks
PM sent
|
|
|
|
|
|
December 29th 2008 at 2:41 AM
[ Modified December 29th 2008 at 2:53 AM
]
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Just a few more parts i thought of while taking it apart, im sure there are quite a few more things. I wish i could edit my first post. I have sale pending on a few items, will update when actully sold.
Polaris 10-60 weights
Voltage Regulator
Wiring harness
Brake Cylinder
Tach
Speedo - 2742 miles
Pics
CDI
10-60 Weights
Chain and Gears
Secondary Clutch
39mm Flat Slide Kehien carbs
|
|
|
|
|
|
December 29th 2008 at 6:09 AM
|
|
| |
|
KRSS144
Average Member
|
782 Posts 
Group: Members
Member Since: July 31st 2007
Location: SPARTA, MI
Current Sled: 2000 XC 600 SP -its stock
2008-2009 Miles: 850
|
|
|
|
| |
Quote originally posted by westman995
Just a few more parts i thought of while taking it apart, im sure there are quite a few more things. I wish i could edit my first post. I have sale pending on a few items, will update when actully sold.
Polaris 10-60 weights
Voltage Regulator
Wiring harness
Brake Cylinder
Tach
Speedo - 2742 miles
Pics
CDI
10-60 Weights
Chain and Gears
Secondary Clutch
39mm Flat Slide Kehien carbs
How much for the regulator?
QUOTE(JeremyZ3 @ Jan 27 2009, 04:38 PM)
F*** YOU ATLEAST I AINT A JEWISH XC JUNK OWNING ASS F***ER
Goodwin Performance clutch kit,Boysen Reeds,1" Track,192 Stud Boys studs,Extra idler wheels,Thunder Products-extra air vents,SLP boost bottle,SLP Airhorn,Walker Evan rear Piggy Back shock,2 SLP Flow Right Intake,Rumble Pack can,PowerMadd 3" pivot riser w/6" riser block,custom made straight bar,PowerMadd handguards,PowerMadd SS extended throttle cable,RSI hand grips and SS brake line,hood vents yellow,Custom seat
04 SXVenom (Little ladies)
99 Banshee
Red Frame,.40 over Vitos Super Stock Piston Kit,Vitos Needles,
T5 pipes/silencers,Tusk nerf bars,K&N Air Filter,22" ITP Mud Lites
14/41 Gearing
|
|
|
|
|
|
December 30th 2008 at 1:38 PM
|
|
| |
kasullivan
Junior Member
|
157 Posts
Group: Members
Member Since: April 9th 2005
Location: columbus, wi, USA
|
|
|
|
| |
I have some psi twin pipes for sale that will fit that motor.
|
|
|
|
|
|
December 30th 2008 at 7:06 PM
[ Modified December 30th 2008 at 7:08 PM
]
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Quote CDI
xtra 10 suspension - PAYMENT PENDING
Front fox shocks
Trailing Arms
Cylinders
Head
Crank
Crank case halves
Water pump - For newer sleds, different cooling style
Oil and coolant tanks - For both 98 xc and the newer gen2s and mybe edge
Chain case - SOLD
Chain case cover
Chain
Gears
39mm kehein flatslide carbs
Stock reeds
Polaris plastic skis
Secondary clutch
Primary clutch - No weights or spring
Exhaust pipe
Can
Nose cone
Front and rear bumpers
Polaris 10-60 weights
Voltage Regulator - PAYMENT PENDING
Wiring harness
Brake Cylinder
Tach
Speedo - 2742 miles
Spindles - SOLD
Driveshaft - SOLDUpdated.. Lets get some serious offers on this stuff. Would like to sell asap.
|
|
|
|
|
|
December 30th 2008 at 10:07 PM
[ Modified December 30th 2008 at 10:08 PM
]
|
|
| |
mitchy
Starting Member
|
1 Posts
Group: Members
Member Since: December 19th 2008
|
|
|
|
| |
What kind of condition are the skis in? What do you want for them?
|
|
|
|
|
|
December 31st 2008 at 7:43 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Quote originally posted by mitchy
What kind of condition are the skis in? What do you want for them?
I PMd you, not sure if you got it?
I MIGHT consider trading the engine for a 600+ doo engine. Not sure if i really want to, but its a possibility. Needs to fit a zx and be complete. Really would prefer a 700 or maybe 800.
|
|
|
|
|
|
January 1st 2009 at 9:58 PM
|
|
| |
|
artiksno340
Advanced Member
|
1933 Posts
Group: Members
Member Since: September 16th 2005
Location: Danielsville/Bloomsburg, PA, USA
Current Sled: 03 Renegade 600/98 XC 600
2008-2009 Miles: 400
|
|
|
|
| |
How much for the wiring harness? I only want it if you keep it in the wire loom.
|
|
|
|
|
|
January 2nd 2009 at 9:37 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Quote originally posted by artiksno340
How much for the wiring harness? I only want it if you keep it in the wire loom.
Sorry ive decided to hold onto it now, Along with the complete engine and all components to run it. Ive got a project for it, if it doesnt work out the engine will be up for sale, but at this point it is no longer for sale. No engine, water pump, cdi, wiring, stator, carbs, etc etc etc..
|
|
|
|
|
|
January 2nd 2009 at 10:50 PM
|
|
| |
|
Clouse2411
Advanced Member
Clouse2411 has the drop and rolled templates on. Should have the track, rear skid and motor in tommarow (: Winter is comming.
Updated Thursday at 9:57 PM
|
1338 Posts
Group: Members
Member Since: July 18th 2006
Location: Tiffin, OH, USA
Current Sled: 93 Polaris XLT 650 RMK
|
|
|
|
| |
How much for the front fox shocks? And are ethier one of them bent?
1997 Ford F-350 XLT
Reg Cab, Long Bed, 7.3L Powerstroke, 2.2k resistor, 3in Downpipe, 5in Single Stack, 2 12in Subs, 1000 Watt Sony Amp, Sony Head Unit,And Custom Air Intake
1993 Polaris XLT 650 RMK
Indy 650 Motor, PSI Modblaster Pipes, Clutched And Geared, Kimpex Plastic Ski's, Polished Tunnel and Bumpers, Black-out Headlight Cover, Gravity-Worx Racing Throttle Cable, Low Black Windshield, Gen II Jackshaft And Chaincase, ODI 8in Grips, RSI handlebar hooks, 136x1.25 Polaris Take-off, Homemade Tunnel Extension, Edge Rear Skid, Nosecone Mounted Fog Lights, Sno-Stuff Light Weight Hood, 4 Display Digatron, Billet Throttle Block, Chrome PowerMadd Handguards, Light-Weight Brake Rotor, Black PowderCoated Skid and Heads, Custom Console, Skidplate, And Bumper, Cometic Gasket Kit, WMS Support Block, Edge Flap, Edge Coolant Bottle, SLP High-Flow Airbox, Moved Running Board Coolers, Carbon Fiber Wrap, Chrome Trim, TracksUSA Rail Extensions, Xtra 10 Shocks, Shorty Seat, Edge Tank, Chromoly Trailing Arms And Radius Rods, Tison Dropped And Rolled Chaincase, And Rear Skid Moved Back 2.5in.
To Come:
Pro-X Brake
XC Spindles
Straight Bars
6061 Auminum Radius Rods
6.25-8in Rox Adjustable Riser
|
|
|
|
|
|
January 2nd 2009 at 10:51 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Quote originally posted by Clouse2411
How much for the front fox shocks? And are ethier one of them bent?
Someone is coming to look at them tomorrow, he is more than likely taking them. If for some odd reason he doesnt, ill let you know. But they are basically sold at this point.
|
|
|
|
|
|
January 3rd 2009 at 12:11 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Skis, left trailing arm, Rear bumper - SOLD
|
|
|
|
|
|
January 4th 2009 at 10:09 PM
[ Modified January 4th 2009 at 10:11 PM
]
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Quote xtra 10 suspension - SOLD
Front fox shocks
Right Trailing Arm
Left Trailing Arm - SOLD
Oil and coolant tanks - For both 98 xc and the newer gen2s and mybe edge
Chain case - SOLD
Chain case cover
Chain
Gears
Polaris plastic skis - SOLD
Secondary clutch
Exhaust pipe
Can
Nose cone
Front bumper
Rear bumper - SOLDUpdated list..
PM me for parts, id like to get rid of this stuff asap. 100 plus shipping for the front fox shocks
|
|
|
|
|
|
January 6th 2009 at 9:14 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Fox shocks anyone? 100 plus shipping
|
|
|
|
|
|
January 15th 2009 at 12:01 PM
|
|
| |
Lucky3
Starting Member
|
1 Posts
Group: Members
Member Since: January 15th 2009
|
|
|
|
| |
Quote originally posted by westman995
Pics
Speedo - 2742 miles on this sled
Fox shocks
Bumper and nose cone
Engine
Will be getting more pics up soon. The sled is almost completely stripped down. Lets get some real, and serious offers on this stuff. I have had tons of emails but only a few responses back so far. If you need pics of something let me know ill get them quicker.
How much for the cylinders and are they 220's?
|
|
|
|
|
|
January 15th 2009 at 2:12 PM
|
|
| |
|
|
westman995
Advanced Member
|
1927 Posts
Group: Members
Member Since: February 22nd 2008
Location: St. James, Minnesota, USA
Current Sled: 98 rmk 600 - zx mod
|
|
|
|
| |
Engine is no longer for sale.
|
|
|
|
|
|
January 26th 2009 at 7:47 AM
|
|
| |
|
kroges
Starting Member
|
38 Posts
Group: Members
Member Since: March 19th 2007
Location: Canton, SD, USA
|
|
|
|
| |
|
|
|
|
|
1 user(s) are reading this topic (0 Members and
1 Guests)
|
 |
|
