phazer II suspension - pogo knuckle started by koolsledz
	January 28th 2009 at 12:35 PM Post #1
	koolsledz New Member 52 Posts Group: Members Member Since: August 24th 2008 Location: Laura, Ohio, USA Current Sled: 1990 phazer II 2008-2009 Miles: 2
	ok, been out riding most the day, but when my left side shock extends all the way on small jumps ect, the knuckle fully extends and locks parallel to the shock, i can put it out and it drops to the neutral position, i replaced both shocks earlier this season, and im almost positive that the knuckle was put back correctly, is my bolts to loose, or too tight, im just tired of stopping to fix it Rating: 0 Quick Edit Edit Topic

	Site Supporter Group: Site Supporters

	January 28th 2009 at 5:24 PM Post #2
	Racing666 Junior Member 498 Posts Group: Members Member Since: September 16th 2006 Current Sled: 99 Vmax SX 600 Triple 2008-2009 Miles: 0
	Quote originally posted by koolsledz ok, been out riding most the day, but when my left side shock extends all the way on small jumps ect, the knuckle fully extends and locks parallel to the shock, i can put it out and it drops to the neutral position, i replaced both shocks earlier this season, and im almost positive that the knuckle was put back correctly, is my bolts to loose, or too tight, im just tired of stopping to fix it I would say their too tight. Rating: 0 Quick Edit Full Edit

	January 28th 2009 at 9:46 PM Post #3
	Cooked New Member 53 Posts Group: Members Member Since: September 21st 2008 Location: Brodhead, WI, USA Current Sled: 86 Phazer 2008-2009 Miles: 1500
	Thats wierd you shouldn't have enough extension in the pogos for the knuckle to over-extend. The chrome tube should have a flared end at the top that should stop on the front axle tube. Here is a pic of mine, its a Phazer 1 In which the knuckle is on the back but thats the angle it should be at. The only thing I can think of is the flange broke off allowing it to drop out farther Rating: 0 Quick Edit Full Edit