Ultra triple in a 02 edge chassis
Close
Login to Your Account
Snowmobile Fanatics - Snowmobile Forum - Powered by vBulletin

Ultra triple in a 02 edge chassis

This is a discussion on Ultra triple in a 02 edge chassis within the Polaris forums, part of the Brand Specific Snowmobile Discussion category; Bought an 02 edge with a blown 800. Have always wanted to put one of my triples in one, and have a great 800 big ...

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Ultra triple in a 02 edge chassis

  1. #1
    Senior Member
    This user has no status.
     

    Member #
    14577
    Join Date
    Nov 2006
    Posts
    1,218

    Ultra triple in a 02 edge chassis

    Bought an 02 edge with a blown 800. Have always wanted to put one of my triples in one, and have a great 800 big bore itching to have something done with it.
    Question is how much trouble and I'm looking at? I know the engine plates were available don't know it they still are, also can the old pipes be modified to fit or also I need custom pipes?
    If its too much headache I'm going to part it out.

  2. #2
    Senior Member
    is let it snow
     
    IndyRXL's Avatar
    Member #
    20046
    Join Date
    Dec 2007
    Location
    Basom NY
    Posts
    1,108
    http://www.snowmobilefanatics.com/fo...ture339837.jpg

    Ultra motor wedge chassis pipes in 01 edge
    04 Prox 600

    01 XCSP 680 ultra swap, SOLD

    96 XCR 600, edge skid, xtra10 front, edge bars and controls homemade pivot riser, reverse

    79 TX 340, 34mm carbs, full rubber track conversation, indy650 tank, seat and rear skid

  3. #3
    Senior Member
    is let it snow
     
    IndyRXL's Avatar
    Member #
    20046
    Join Date
    Dec 2007
    Location
    Basom NY
    Posts
    1,108
    04 Prox 600

    01 XCSP 680 ultra swap, SOLD

    96 XCR 600, edge skid, xtra10 front, edge bars and controls homemade pivot riser, reverse

    79 TX 340, 34mm carbs, full rubber track conversation, indy650 tank, seat and rear skid

  4. #4
    Senior Member
    is let it snow
     
    IndyRXL's Avatar
    Member #
    20046
    Join Date
    Dec 2007
    Location
    Basom NY
    Posts
    1,108
    04 Prox 600

    01 XCSP 680 ultra swap, SOLD

    96 XCR 600, edge skid, xtra10 front, edge bars and controls homemade pivot riser, reverse

    79 TX 340, 34mm carbs, full rubber track conversation, indy650 tank, seat and rear skid

  5. #5
    Senior Member
    This user has no status.
     

    Member #
    14577
    Join Date
    Nov 2006
    Posts
    1,218
    That looks like the pipes fit very well!! That exactly what I needed to see. Did you build an engine plate? Or buy an already made?
    Thanks for the pics

  6. #6
    Senior Member
    is let it snow
     
    IndyRXL's Avatar
    Member #
    20046
    Join Date
    Dec 2007
    Location
    Basom NY
    Posts
    1,108
    It's been a few yrs since I did this so I don't remember exactly everything that was involved. I use 800 straps that I remember drilling different holes in, I was able to use one of the holes in each strap and drilled the other. Hade to move one of the chassis mounts over but the hole was already in chassis. The pipes I had to change the angle of the flanges, I cut them and turned them to the correct angle and rewelded them. I also had to use the carb flanges from a 700 or 800 twin because of the angle the motor sets in the edge chassis. Was able to use the edge chassis belt
    04 Prox 600

    01 XCSP 680 ultra swap, SOLD

    96 XCR 600, edge skid, xtra10 front, edge bars and controls homemade pivot riser, reverse

    79 TX 340, 34mm carbs, full rubber track conversation, indy650 tank, seat and rear skid

  7. #7
    Senior Member
    This user has no status.
     
    Ugly_old_Poo_kid's Avatar
    Member #
    17965
    Join Date
    Mar 2007
    Posts
    9,980
    The edge chassis were designed to accommodate a triple, as they were developed while Polaris was still using Fuji triples.. The early 800 edges even had an airbox that can be used on a triple.
    ---------------------------------------------

    16 - Axys 800 Switchback - Yeah, I had to get one of them!! http://www.polaris.com/en-us/snowmob...itchback-pro-s
    05 - Edge 800 Touring - Flying couch - SOLD
    03 - Edge 700 SKS - Warhead - in progress of another chassis rebuild.
    91 - 650 RXL SKS improved stock drag sled - Bastard Child

  8. #8
    Senior Member
    This user has no status.
     

    Member #
    14577
    Join Date
    Nov 2006
    Posts
    1,218
    Good to know!
    Think I'm going to have to give it a go, love my 05 edge, and I love my triples. Have enough prices and parts around I think I can do it relatively reasonably$$

  9. #9
    Senior Member
    This user has no status.
     
    Ugly_old_Poo_kid's Avatar
    Member #
    17965
    Join Date
    Mar 2007
    Posts
    9,980
    Then have at it!! The edge is a step above all the other sit-down chassis in weight and ergonomics, so the payoff is pretty good.

    I was about to stuff a triple into my edge chassis (warhead), but just found someone that wants to trade me 2 fusion chassis for it instead.. (and I want to stuff a triple into one of those and use it for hill drags) ..so it just might have to go.

    Since I'm not putting a triple into that edge chassis, and I have one of the air-boxes that'll fit a triple, let me know if you want it.
    ---------------------------------------------

    16 - Axys 800 Switchback - Yeah, I had to get one of them!! http://www.polaris.com/en-us/snowmob...itchback-pro-s
    05 - Edge 800 Touring - Flying couch - SOLD
    03 - Edge 700 SKS - Warhead - in progress of another chassis rebuild.
    91 - 650 RXL SKS improved stock drag sled - Bastard Child

  10. #10
    Senior Member
    This user has no status.
     

    Member #
    14577
    Join Date
    Nov 2006
    Posts
    1,218
    Pm sent, I'm interested in the airbox

Page 1 of 2 1 2 LastLast

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. engine plate for watercraft triple, fits edge chassis
    By Loudpipe in forum Engine, Drivetrain, Pipes, and Cans
    Replies: 2
    Last Post: 01-31-2012, 03:31 PM
  2. Edge Chassis Handlbar assy. On Aggessive Chassis
    By cisneros56 in forum The Performance Tuning Shop
    Replies: 0
    Last Post: 12-29-2009, 09:50 AM
  3. IQ Chassis skis on an Edge Chassis?
    By Sled_Dog in forum Polaris
    Replies: 8
    Last Post: 05-01-2009, 08:06 PM
  4. 96 Ultra SP Project 680 triple/ triple!!
    By 97SPX680 in forum Polaris
    Replies: 58
    Last Post: 08-18-2007, 08:42 AM
  5. Triple in Edge Chassis?
    By the_hog in forum General
    Replies: 5
    Last Post: 04-14-2004, 07:57 PM

Search tags for this page

triple in edge chassis

,

ultra 680 in xcr chassis

Click on a term to search for related topics.