Snowmobile Fanatics banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Engine
    Hi I’m new to the forum and I’m specifically looking for somebody who might have the RV service tools - universal crankshaft rebuilding kit. I’m either looking to buy one or get measurements so I could have a local machine shop make them. I’ve attached a photo of the tools listed in there guide...
  2. Polaris
    Hey guys I'm new to the forum. I was hoping to get some help. I have a 96 Indy 500 twin, liquid cooled, and i need a new crank for it. bad lower connecting rod bearing which also trashed the surrounding crank bearings. I cant find anywhere to rebuild it for cheap enough to justify it so I'm...
  3. The Performance Tuning Shop
    I am new to the forum and have been searching for some help with rebuilding my recently purchased 1995 XLT special. The sled has not blown up yet however compression is below 100 on all of the cylinders. I have been trying to find information on it for a while and have been getting very...
  4. General Snowmobile Discussions
    i sold a good working xlt water pump on ebay and i sold and shipped it to the guy. 20 days later he claims it doesnt work and leaks. he opened a case and they sided with him which is crap because i dont sell junk. ebay made him return it. when i got it back the pump was greasy and dirty with...
  5. Polaris
    I am currently rebuilding a Super Sport 550 and I an about ready to put the crank case back together and start the rebuilding process. I am new to this and have a few questions about oiling the crankshaft and parts before I start replacing and putting stuff together. My crank case is in 2 and...
  6. General Snowmobile Discussions
    We are rebuilding my 1996 storm sks, and I am wondering if there is any specific pattern to torquing down the heads. I know that they need to be torqued down to 18 ft/lbs but I don't know the pattern. Thanks
1-6 of 6 Results
Top