Snowmobile Fanatics banner

'01 800 XC Running lean

1K views 8 replies 7 participants last post by  Sno-X-treme 
#1 ·
I recently installed a set of Carbon Tech reeds and a boost bottle on my 800 and my plugs seem to show a lean condition. The HSP boost bottle instructions said to turn the mixture screws on the carbs out 1/2 a turn because the bottle would lean the mixture out at low RPM and I did that. I could just jet up a size (running stock 460 mains) but I would like to try to get to the real problem if there is one. Thanks for the help.
 
Discussion starter · #6 ·
Thanks for the help. I would have just put the mains but I needed confirmation. BTW I cleaned the carbs out when I put the bottle and reeds in and the idle is high now, about 2200.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top