Snowmobile Fanatics banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
what should i do to setup a 01 summit 700 fot watercross? im taking the seat off, limiting the snow flap, loseing the oil injection, stiffining the fron skid shock, losening the limiter strap, ski stance is 37in, sealing up the belly pan. what should i do with the clutching and gearing????
it has 22 top and 43 bottom already, i have a 19 top and a 45 bottom that will fit this sled.

sled has a 15X144X2 track on it.
 

·
Registered
Joined
·
7 Posts
It looks like your on the write track I would drop down to a 136 1.25 or 1.5 if you can .the 136 would still be legal as a stocker as per IWA/ISR rules because its considered a long track sled, a 121 would be ilegal. A 144 is tougher to turn than a 136 or 121, plus it robs the power you could use, and keep your tunnel extension it helps get rid of extra water.[attachment=58686]see how I have a 136 tunnel extension
 

Attachments

·
Registered
Joined
·
7 Posts
I'd run the 19/45 gearing also, and try and have your engagment at about 4500-4800 rpm lighter wheights or eq. for TRA and run a progessive helix for backshift, Are you going to race? IWA?
www.iwausa.org
 
1 - 3 of 3 Posts
Top