Snowmobile Fanatics banner

1 - 3 of 3 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
i have and 03 pro x 700 chassis w/ a 02 edge x 800 motor that has been fully rebuild. new crank and wiseco topend with re-nickeled cylinders. it runs great but i was wondering what i should run for springs, weights and gearing for more quickness than topend. and should i put a pipe(s) on it? maybe porting?
 

·
Registered
Joined
·
2,973 Posts
I'd go with an SLP single pipe/can/y-pipe, proven setup. SLP head if you can swing it as well. EPI red primary spring w/68g weights, 66/44-.46 helix black spring, 22/40 or 41 gearing. Try the stock gearing first though.
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #3 ·
myvertxcape said:
I'd go with an SLP single pipe/can/y-pipe, proven setup. SLP head if you can swing it as well. EPI red primary spring w/68g weights, 66/44-.46 helix black spring, 22/40 or 41 gearing. Try the stock gearing first though.
thats what one of my buddys said to me but he sugggested 25/41 for gearing.
 
1 - 3 of 3 Posts
Top