Snowmobile Fanatics banner
1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
I reciently took apart the Carb on my 1980 Yamaha Enticer 340D, also replaced the fuel pump with a New one. After I put everything back on the snowmobile I couldn't get it to start. I was wondering if anyone knew if this is because I need to make some Carb adjustments? and if so what should I do to get this bad boy started. My throttle cable is tight and I am gettin spark....I don't know what the problem could be?
 

·
Registered
Joined
·
62 Posts
first i would check if the carb is getting fuel. try to start the sled then pull the bowl drain plug on the bottom of the carb. if thats filled with gas and it still is not starting check that your jets are clean. if the carb is not getting fuel check that your fuel pump is working. hope i am a little help.
 
1 - 2 of 2 Posts
Top