Snowmobile Fanatics banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a 1995 xlt i recently bought with a trashed suspension. I picked up a extra 12 on ebay and attempted to install it only to find that the mounting holes are in a different location the the stock 6 or 8 inch suspension. If anyone could help me with some info on new mounting hole locations I would greatly appreciate it. The extra 12 is out of a 1994 xlt I was told, although it looks the same as the 1997.
 

·
Registered
Joined
·
614 Posts
Yes you will need to remount the holes for the suspension, it will work,but the brackets must be relocated.

 
1 - 2 of 2 Posts
Top