Snowmobile Fanatics banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,185 Posts
Discussion Starter · #1 ·
ran when parked a few years ago, got it out of storage, installed a new battery, fresh gas, new plugs. It will not start, it will run if I put gas in the cylinders. The ECM is not flashing any codes, if I hard wire the fuel pump, it will run. But, I can not hear the pump kick on if I pull the rope. I have no idea, HELP!!!
 

· Registered
Joined
·
9,987 Posts
Unplug a sensor and look for the flashing light on the ECU.. No flashing light means no power to ECU.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top