Snowmobile Fanatics banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,480 Posts
If its the stock track its 7/8" I believe. Deeper lug is a great upgrade. Can definitely run at least a 1.5" track as long as its notched for the heat exchangers. But you're losing a bit on the top end with lug that deep. I have a 1.25" ripsaw on 98 xc700 and even thought I lost a few mph on top the trade for low end traction was worth it.
 
  • Like
Reactions: Jamestoms

·
Registered
Joined
·
9 Posts
Discussion Starter · #3 ·
If its the stock track its 7/8" I believe. Deeper lug is a great upgrade. Can definitely run at least a 1.5" track as long as its notched for the heat exchangers. But you're losing a bit on the top end with lug that deep. I have a 1.25" ripsaw on 98 xc700 and even thought I lost a few mph on top the trade for low end traction was worth it.
Awesome thanks for helping man
 

·
Registered
Joined
·
1,480 Posts
Did u notch the track yourself?
I notched my ripsaw myslef with a utility knife. Just had to trip a 1/4" off the fingers I think. Easy job
 
  • Like
Reactions: whitexc
1 - 6 of 6 Posts
Top