Snowmobile Fanatics banner
1 - 4 of 4 Posts

·
Registered
Joined
·
453 Posts
Discussion Starter · #1 ·
I just want to clarify a couple things before I put my 95' xcr 600 triple back together. which way does the arrow on the pistons point towards the mag or the pto end? Also, how many foot pounds do I torque the crank case bolts to?

Thanks in advance...[:D]
 

·
Registered
Joined
·
1,966 Posts
Not sure about the arrow but make sure the ring gap in on the intake not exhaust side. Seems to me the case bolts torque to like 18 to 20 ft. lbs. Riley
 

·
Registered
Joined
·
661 Posts
According to the manual, the arrow points to the flywheel side (mag)
 

·
Registered
Joined
·
453 Posts
Discussion Starter · #4 ·
Found my tech book. Thanks anyways![:D]
 
1 - 4 of 4 Posts
Top