Snowmobile Fanatics banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I just purchased a 01 700 xcsp with an edge chassis with no owners manual. Can anyone suggest shock adjustments. The rear suspension shock has a air valve and I don't know what the pressure should be. Is there a site that will give me the info I need? Any help would be greatly appreciated.
 

·
Registered
Joined
·
521 Posts
The shocks are filled with nitrogen, so there aren't any adjustments to made there, and I don't believe those were clicker shocks on that sled, so there really isn't much you can do there except adjust the springs, limiter straps and the coupler blocks. What are you looking to adjust it for? trail riding, hard riding. Are the shocks too soft? If so it might be time for a rebuild, if thats the case, try the thread at the top of the general forum for a good shock rebuilding service. www.polarisindustries.com has links to most manuals, look under the riders menu.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top