I just rebuilt the top und on a 2002 800 xc edge. The guy drove the sled to my garage. I found that the power valves were shot when we tore it down. No the problem we have is that it won't start. I can't get any spark to the plugs. I tested the coil on two other sleds and it was fine, good spark. I tested the plug from the cdi to the coil to see of I could get the test light to work connected everythig back up and I can't complete the circuit the same way I did unplugged. Tried this on the other two polaris sleds I have and it works fine. Could this be the stator or coil. Can I take a cdi off of a 2005 700 rmk to test and see if it is the cdi. The connections look the same. I just don't want to fry my CDI. I hope this makes sense to someone. I am stumped on this one. It runs in the garage before the rebuild and won't start after. I checked the kill switcw also plus tried unplugging the ignition. Still nothing. I hate electrical problems. Need help.