Snowmobile Fanatics banner

1 - 1 of 1 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
I changed the small plastic suspension stiffening device that has 3 settings. I made it so the rear was as stiff as possible, which still wasn't where I wanted it. I then added the 2 rods that can be set up with the tool that came with the Panther. This made it exactly where I wanted it when there are 2 riders. The problem is that when I brought the rods back down the plactic on them was melted.[:(] Any idea why this may be the case? I want the stiffness, but I don't want to hurt the machine.
Any help or ideas would be great.
Thanks everyone, great forum
 
1 - 1 of 1 Posts
Top